Request Quote
(Ships tomorrow)
76314-217LF Equivalent & Substitute Parts
Part Overview
The 76314-217LF is a 34-position receptacle connector manufactured by Amphenol ICC (FCI) in the BergCon® series. This through-hole, gold-plated connector operates at 0.100" (2.54mm) pitch and is designed for board-to-board or cable applications with solder termination and push-pull fastening. The part is active and in stock with 1016 units available. Equivalent and substitute parts are identified based on matching electrical and mechanical parameters including connector type, position count, pitch, mounting method, and contact finish specifications.
Substiute Parts
Key Parameters
| Parameter | 76314-217LF |
|---|---|
| Connector Type | Receptacle |
| Number of Positions | 34 |
| Pitch - Mating | 0.100" (2.54mm) |
| Number of Rows | 2 |
| Row Spacing - Mating | 0.100" (2.54mm) |
| Mounting Type | Through Hole |
| Termination | Solder |
| Fastening Type | Push-Pull |
| Contact Finish - Mating | Gold |
| Insulation Height | 0.335" (8.51mm) |
| Material Flammability Rating | UL94 V-0 |
| RoHS Status | RoHS Compliant |
| Moisture Sensitivity Level | 1 (Unlimited) |
Substitute Part Grouping Explanation
Substitution eligibility for the 76314-217LF is determined by the following critical parameters:
- Connector Type: Receptacle configuration required
- Position Count: 34 positions mandatory
- Pitch Specification: 0.100" (2.54mm) mating pitch and row spacing
- Mounting Configuration: Through-hole solder termination
- Fastening Mechanism: Push-pull fastening type
- Contact Finish: Gold-plated mating surface
- Insulation Height: 0.335" (8.51mm)
- Flammability Compliance: UL94 V-0 rating
Substitute parts are grouped into two categories:
Category A - Header Connectors (Connector Type Variation): Parts PPPC172LFBN-RC and PPTC172LFBN-RC are header connectors rather than receptacles. These are functionally compatible when used as mating pairs with receptacle connectors and share identical pitch, position count, row configuration, and mounting specifications.
Category B - Receptacle Connectors (Direct Equivalents): Parts SSQ-117-01-L-D, SSQ-117-01-SM-D, SSQ-117-04-L-D, SSQ-117-21-G-D, SSW-117-01-F-D, SSW-117-01-L-D, SSW-117-03-F-D, and SSW-117-23-G-D are receptacle connectors from Samtec Inc. These maintain identical connector type, position count, pitch, row spacing, mounting type, termination method, and fastening type as the main part.
Parameter Comparison
| Parameter | 76314-217LF | PPPC172LFBN-RC | PPTC172LFBN-RC | SSQ-117-01-L-D | SSQ-117-21-G-D | SSW-117-01-L-D | SSW-117-03-F-D |
|---|---|---|---|---|---|---|---|
| Manufacturer | Amphenol ICC | Sullins | Sullins | Samtec | Samtec | Samtec | Samtec |
| Connector Type | Receptacle | Header | Header | Receptacle | Receptacle | Receptacle | Receptacle |
| Number of Positions | 34 | 34 | 34 | 34 | 34 | 34 | 34 |
| Pitch - Mating | 0.100" | 0.100" | 0.100" | 0.100" | 0.100" | 0.100" | 0.100" |
| Number of Rows | 2 | 2 | 2 | 2 | 2 | 2 | 2 |
| Row Spacing - Mating | 0.100" | 0.100" | 0.100" | 0.100" | 0.100" | 0.100" | 0.100" |
| Mounting Type | Through Hole | Through Hole | Through Hole | Through Hole | Through Hole | Through Hole | Through Hole |
| Termination | Solder | Solder | Solder | Solder | Solder | Solder | Solder |
| Fastening Type | Push-Pull | Push-Pull | Push-Pull | Push-Pull | Push-Pull | Push-Pull | Push-Pull |
| Contact Finish - Mating | Gold | Gold | Tin | Gold | Gold | Gold | Gold |
| Insulation Height | 0.335" | 0.335" | 0.335" | 0.335" | 0.335" | 0.335" | 0.335" |
| Material Flammability Rating | UL94 V-0 | UL94 V-0 | UL94 V-0 | UL94 V-0 | UL94 V-0 | UL94 V-0 | UL94 V-0 |
| RoHS Status | RoHS Compliant | ROHS3 Compliant | ROHS3 Compliant | ROHS3 Compliant | ROHS3 Compliant | ROHS3 Compliant | ROHS3 Compliant |
| Product Status | Active | Active | Active | Active | Active | Active | Active |
Engineering Selection Recommendations
All substitute parts listed maintain active product status and comply with RoHS requirements. The Samtec receptacle connectors (SSQ and SSW series) provide direct functional equivalence to the 76314-217LF with identical connector type, position configuration, and pitch specifications. These parts are manufactured to UL94 V-0 flammability standards and support the same through-hole solder termination and push-pull fastening architecture.
The Sullins header connectors (PPPC172LFBN-RC and PPTC172LFBN-RC) are suitable for applications requiring mating pairs with receptacle connectors. PPPC172LFBN-RC maintains gold contact finish matching the main part specification, while PPTC172LFBN-RC provides a tin-plated alternative. Both Sullins parts feature identical pitch, position count, row spacing, and insulation height.
Selection between substitute parts should be based on connector type requirement (receptacle versus header), contact finish specification (gold versus tin), and contact length requirements. All listed parts support the same 0.100" (2.54mm) pitch standard and through-hole PCB mounting configuration.
Frequently Asked Questions (FAQ)
Q: Can SSQ-117-01-L-D and SSW-117-01-L-D be used interchangeably with 76314-217LF?
A: Both Samtec receptacle connectors share identical connector type, position count, pitch, row spacing, mounting type, termination method, and fastening type as the 76314-217LF. The primary difference is contact length specification: SSQ-117-01-L-D features 0.104" (2.64mm) post length while SSW-117-01-L-D also specifies 0.104" (2.64mm). Selection depends on application-specific contact length requirements.
Q: What is the difference between PPPC172LFBN-RC and PPTC172LFBN-RC?
A: Both are 34-position header connectors from Sullins with identical pitch, position count, row configuration, and mounting specifications. The primary distinction is contact finish: PPPC172LFBN-RC features gold-plated mating contacts, while PPTC172LFBN-RC uses tin-plated contacts. Both maintain UL94 V-0 flammability compliance and through-hole solder termination.
Q: Are header connectors (PPPC172LFBN-RC, PPTC172LFBN-RC) compatible with receptacle connectors?
A: Header and receptacle connectors are designed as mating pairs. Header connectors can mate with receptacle connectors when pitch, position count, row spacing, and contact geometry specifications align. PPPC172LFBN-RC and PPTC172LFBN-RC are compatible with 76314-217LF and equivalent receptacle connectors in board-to-board or cable interconnect applications.
Q: What packaging differences exist among substitute parts?
A: The 76314-217LF is supplied in bulk packaging. PPPC172LFBN-RC and PPTC172LFBN-RC are supplied in tray packaging. Samtec receptacle connectors (SSQ and SSW series) are supplied in bulk packaging. Packaging format does not affect electrical or mechanical compatibility; selection depends on procurement and assembly requirements.
Q: Do all substitute parts meet the same compliance standards as 76314-217LF?
A: All listed substitute parts maintain UL94 V-0 flammability rating and RoHS compliance. The 76314-217LF is RoHS Compliant; substitute parts are ROHS3 Compliant, representing current regulatory alignment. All parts are active products with established supply availability.
Alternative Parts
SJ6012L2TP
Littelfuse Inc.
6 Alternative Parts
JMK107BBJ476MA-RE
Taiyo Yuden
10 Alternative Parts
GMK107BBJ475MA-T
Taiyo Yuden
5 Alternative Parts
SJ6020N2ARP
Littelfuse Inc.
3 Alternative Parts
SJ6025R2ATP
Littelfuse Inc.
4 Alternative Parts
2474-05L
API Delevan Inc.
1 Alternative Parts
4590R-684K
API Delevan Inc.
1 Alternative Parts
CM6560R-334
API Delevan Inc.
1 Alternative Parts
CM6460-104
API Delevan Inc.
1 Alternative Parts
5526-12
API Delevan Inc.
1 Alternative Parts