Amphenol ICC 76314-210 Equivalent & Substitute Parts

Part Overview

The Amphenol ICC 76314-210 is a 20-position receptacle connector with 0.100" (2.54mm) pitch, designed for through-hole PCB mounting with gold-plated mating contacts. This BergCon® series connector is classified as obsolete, making equivalent and substitute parts necessary for ongoing design support and procurement. The connector features push-pull fastening, solder termination, and is rated for UL94 V-0 flammability compliance. Substitutes must maintain the same electrical interface (20 positions, 2 rows, 0.100" pitch and row spacing) and mechanical mounting characteristics to ensure board-level compatibility.

Key Parameters

Parameter	76314-210 Specification
Connector Type	Receptacle
Contact Type	Female Socket
Number of Positions	20
Number of Rows	2
Pitch - Mating	0.100" (2.54mm)
Row Spacing - Mating	0.100" (2.54mm)
Mounting Type	Through Hole
Termination	Solder
Fastening Type	Push-Pull
Contact Finish - Mating	Gold
Insulation Material	Thermoplastic, Polyester, Glass Filled
Contact Material	Brass
Material Flammability Rating	UL94 V-0
RoHS Status	RoHS non-compliant

Substitute Part Grouping Explanation

Substitute parts for the 76314-210 are grouped based on strict electrical and mechanical compatibility criteria. All substitutes must satisfy the following mandatory parameters:

20-position receptacle connector with female socket contacts
0.100" (2.54mm) mating pitch and row spacing
2-row configuration
Through-hole solder termination
Push-pull fastening mechanism
Board-to-board or board-to-cable mounting style

Substitutes are differentiated by contact finish (gold or tin), contact material composition (brass versus phosphor bronze), insulation height variations, and compliance certifications. Contact finish selection depends on application requirements; gold-plated contacts provide enhanced corrosion resistance, while tin finishes offer cost optimization. Insulation material and flammability ratings must meet or exceed the original specification for direct substitution in safety-critical applications.

Parameter Comparison

Parameter	76314-210	0015445120	0015446820	0901512120	0901512220	0901512320	1-534206-0	1-534236-0	416-83-220-41-007101	416-83-220-41-012101
Manufacturer	Amphenol ICC	Molex	Molex	Molex	Molex	Molex	TE Connectivity	TE Connectivity	Preci-Dip	Preci-Dip
Connector Type	Receptacle	Receptacle	Receptacle	Receptacle	Receptacle	Receptacle	Receptacle	Receptacle, Bottom or Top Entry	Socket	Socket
Contact Type	Female Socket	Female Socket	Female Socket	Female Socket	Female Socket	Female Socket	Female Socket	Female Socket	Female Socket	Female Socket
Number of Positions	20	20	20	20	20	20	20	20	20	20
Number of Rows	2	2	2	2	2	2	2	2	2	2
Pitch - Mating	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)
Row Spacing - Mating	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)
Mounting Type	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole
Termination	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder
Fastening Type	Push-Pull	Push-Pull	Push-Pull	Push-Pull	Push-Pull	Push-Pull	Push-Pull	Push-Pull	Push-Pull	Push-Pull
Contact Finish - Mating	Gold	Gold	Tin	Tin	Gold	Gold	Gold	Gold	Gold	Gold
Contact Material	Brass	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Beryllium Copper	Beryllium Copper
Insulation Height	0.335" (8.51mm)	0.340" (8.64mm)	0.340" (8.64mm)	0.335" (8.51mm)	0.335" (8.51mm)	0.335" (8.51mm)	0.320" (8.13mm)	0.340" (8.64mm)	0.394" (10.00mm)	0.354" (9.00mm)
Operating Temperature	Not specified	-40°C ~ 125°C	-40°C ~ 105°C	-55°C ~ 105°C	-55°C ~ 105°C	-55°C ~ 105°C	-65°C ~ 125°C	-65°C ~ 105°C	-55°C ~ 125°C	-55°C ~ 125°C
Current Rating (Amps)	Not specified	2.5A	2.5A	3A	3A	3A	2A	Not specified	3A	3A
Voltage Rating	Not specified	500VAC	500VAC	350V	350V	350V	Not specified	Not specified	Not specified	Not specified
Material Flammability Rating	UL94 V-0	UL94 V-0	UL94 V-0	Not specified	Not specified	Not specified	Not specified	Not specified	UL94 V-0	UL94 V-0
RoHS Status	RoHS non-compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	Not applicable	RoHS non-compliant	ROHS3 Compliant	ROHS3 Compliant

Engineering Selection Recommendations

Primary Substitutes (Active Status, RoHS3 Compliant):

The Molex C-Grid 71850 series parts 0015445120 (gold) and 0015446820 (tin) are direct functional equivalents with active product status and ROHS3 compliance. These parts maintain identical pitch, row spacing, and position count while offering improved compliance certifications. The 0015445120 is recommended for applications requiring gold contact finish matching the original 76314-210 specification.

The Molex C-Grid III 90151 series (0901512120, 0901512220, 0901512320) provides alternative geometry with identical electrical interface. Parts 0901512220 and 0901512320 offer gold-plated contacts with active status and ROHS3 compliance. These connectors feature slightly different insulation heights and contact post lengths but maintain full mechanical and electrical compatibility.

Secondary Substitutes (Active Status, Compliance Variations):

TE Connectivity AMPMODU Mod II series parts 1-534206-0 and 1-534236-0 are active alternatives with gold contact finish. Part 1-534206-0 supports board-to-board or cable mounting, while 1-534236-0 provides bottom or top entry configuration. RoHS compliance status differs; 1-534206-0 is not applicable, and 1-534236-0 is RoHS non-compliant.

Preci-Dip 416 series parts 416-83-220-41-007101 and 416-83-220-41-012101 are active alternatives with ROHS3 compliance and UL94 V-0 flammability rating. These connectors feature beryllium copper contacts and higher insulation heights (0.394" and 0.354" respectively), providing enhanced mechanical robustness. Contact shape differs (circular versus square), which may affect mating force characteristics.

Compliance Considerations:

For applications requiring RoHS3 compliance, select from Molex C-Grid series (0015445120, 0015446820, 0901512120, 0901512220, 0901512320) or Preci-Dip 416 series. For applications requiring UL94 V-0 flammability certification, Molex C-Grid 71850 series and Preci-Dip 416 series meet this requirement. TE Connectivity parts do not specify flammability ratings in provided data.

Frequently Asked Questions (FAQ)

Q: Can the 76314-210 be directly replaced with any of these substitutes on existing PCBs?

A: Yes, all listed substitutes maintain the same 20-position, 2-row configuration with 0.100" (2.54mm) pitch and row spacing. Through-hole solder termination and push-pull fastening are identical. However, verify insulation height clearance on your PCB layout, as some substitutes vary from the original 0.335" specification. Preci-Dip 416 series parts have notably higher insulation heights (0.354" to 0.394") and may require layout verification.

Q: What is the difference between gold and tin contact finishes?

A: Gold-plated contacts (76314-210, 0015445120, 0901512220, 0901512320, 1-534206-0, 1-534236-0, 416-83-220-41-007101, 416-83-220-41-012101) provide superior corrosion resistance and are preferred for high-reliability applications. Tin-plated contacts (0015446820, 0901512120) offer cost optimization and are suitable for general-purpose applications with standard environmental conditions. Contact finish thickness varies across manufacturers; verify specifications if corrosion resistance is critical.

Q: Are there RoHS compliance differences between substitutes?

A: Yes. The original 76314-210 is RoHS non-compliant. Molex C-Grid series (0015445120, 0015446820, 0901512120, 0901512220, 0901512320) and Preci-Dip 416 series are ROHS3 compliant. TE Connectivity 1-534206-0 has not applicable RoHS status, and 1-534236-0 is RoHS non-compliant. For new designs targeting RoHS compliance, select Molex or Preci-Dip alternatives.

Q: What contact material differences exist, and do they affect performance?

A: The original 76314-210 uses brass contacts, while most substitutes employ phosphor bronze or beryllium copper. Phosphor bronze (Molex and TE Connectivity parts) offers improved spring characteristics and contact retention. Beryllium copper (Preci-Dip 416 series) provides enhanced electrical conductivity and mechanical durability. All materials are compatible with standard PCB soldering processes. Contact material selection does not affect electrical interface compatibility.

Q: Which substitute offers the best temperature range?

A: TE Connectivity 1-534206-0 and Preci-Dip 416 series support -55°C to 125°C operating range, matching or exceeding most industrial requirements. Molex C-Grid 71850 series (0015445120) supports -40°C to 125°C. Molex C-Grid III 90151 series and TE Connectivity 1-534236-0 support -55°C to 105°C. Select based on your application's thermal requirements.

Q: Can I mix and match headers and receptacles from different manufacturers?

A: No. The 76314-210 is a receptacle connector designed to mate with standard 0.100" (2.54mm) pitch male headers. Substitutes listed are all receptacles. Ensure your mating header maintains identical pitch and row spacing. Contact geometry (square versus circular) may affect mating force but does not prevent mechanical engagement.

Q: What is the difference between "Receptacle" and "Socket" connector types?

A: In this context, both terms describe female connectors with socket contacts. Preci-Dip parts are labeled "Socket" while others are labeled "Receptacle," but both types function identically as female connectors. The terminology difference reflects manufacturer classification conventions and does not affect electrical or mechanical compatibility.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message