76314-150LF Equivalent & Substitute Parts

Part Overview

The Amphenol ICC 76314-150LF is a 100-position receptacle connector with 0.100" (2.54mm) pitch, designed for through-hole board-to-board or cable applications. This BergCon® series connector features gold-plated mating contacts, tin-plated posts, and solder termination with push-pull fastening. The part is active in production and RoHS compliant with UL94 V-0 flammability rating.

Substitute parts are necessary when addressing supply constraints, lead time requirements, or specific application needs while maintaining electrical and mechanical compatibility within the 100-position 0.100" pitch rectangular connector category.

Substiute Parts

76314-150LF

Amphenol ICC (FCI)In Stock: 80976314-150LF Datasheet

Current PartRFQ

SSQ-150-01-G-D

Samtec Inc.In Stock: 3398SSQ-150-01-G-D Datasheet

MFR RecommendedRFQ

SSQ-150-21-S-D

Samtec Inc.In Stock: 1030SSQ-150-21-S-D Datasheet

MFR RecommendedRFQ

SSW-150-01-G-D

Samtec Inc.In Stock: 2483SSW-150-01-G-D Datasheet

MFR RecommendedRFQ

SSW-150-01-S-D

Samtec Inc.In Stock: 2587SSW-150-01-S-D Datasheet

MFR RecommendedRFQ

SSW-150-01-T-D

Samtec Inc.In Stock: 3765SSW-150-01-T-D Datasheet

MFR RecommendedRFQ

SSW-150-02-G-D

Samtec Inc.In Stock: 1983SSW-150-02-G-D Datasheet

MFR RecommendedRFQ

SSW-150-02-S-D

Samtec Inc.In Stock: 1217SSW-150-02-S-D Datasheet

MFR RecommendedRFQ

SSW-150-21-S-D

Samtec Inc.In Stock: 844SSW-150-21-S-D Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 76314-150LF is determined by strict adherence to the following parameters:

Critical Parameters (Must Match):

• Connector type: Receptacle
• Number of positions: 100
• Pitch - mating: 0.100" (2.54mm)
• Number of rows: 2
• Row spacing - mating: 0.100" (2.54mm)
• Mounting type: Through hole
• Termination: Solder
• Fastening type: Push-pull
• Insulation height: 0.335" (8.51mm)
• Material flammability rating: UL94 V-0

Variable Parameters (Allowed to Differ):

• Manufacturer and series designation
• Contact type (female socket vs. forked)
• Contact material (brass vs. phosphor bronze)
• Contact finish - mating (gold thickness variations)
• Contact finish - post (gold vs. tin)
• Insulation color
• Contact length - post
• Operating temperature range
• Insulation material composition
• RoHS compliance version (RoHS Compliant vs. ROHS3 Compliant)

All substitute parts listed below maintain the core electrical and mechanical interface requirements for 100-position 0.100" pitch through-hole solder termination with push-pull fastening.

Parameter Comparison

Engineering Selection Recommendations

All listed substitute parts maintain active product status and meet UL94 V-0 flammability requirements. The Samtec SSQ and SSW series alternatives are ROHS3 compliant, representing current-generation RoHS certification standards.

Selection between substitute parts should account for:

Contact Post Length Considerations: The 76314-150LF features a 0.135" (3.43mm) post length. Samtec SSQ and SSW series with 0.104" (2.64mm) post length (SSQ-150-01-G-D, SSQ-150-21-S-D, SSW-150-01-G-D, SSW-150-01-S-D, SSW-150-01-T-D, SSW-150-21-S-D) are suitable for standard PCB thicknesses. The SSW-150-02-G-D and SSW-150-02-S-D variants with 0.194" (4.93mm) post length accommodate thicker PCB assemblies.

Contact Finish - Post Selection: Parts designated with "-G-" suffix (gold post finish) and "-S-" suffix (tin post finish) are available. The 76314-150LF uses tin post finish; equivalent Samtec parts with tin post finish are SSQ-150-21-S-D, SSW-150-01-S-D, SSW-150-02-S-D, and SSW-150-21-S-D.

Contact Finish - Mating Thickness: The 76314-150LF specifies 30.0µin (0.76µm) gold mating finish. Samtec parts with matching 30.0µin thickness are SSQ-150-21-S-D, SSW-150-01-S-D, SSW-150-02-S-D, and SSW-150-21-S-D.

Operating Temperature Range: The 76314-150LF does not specify an operating temperature range. All Samtec SSQ and SSW substitutes rated -55°C ~ 125°C provide extended temperature capability. The SSW-150-01-T-D variant is rated -55°C ~ 105°C due to tin mating finish.

Frequently Asked Questions (FAQ)

Q: Can SSQ and SSW series connectors directly replace the 76314-150LF?

A: Yes, within the constraints of the specified parameters. All listed Samtec parts maintain the 100-position, 0.100" pitch, 2-row configuration with through-hole solder termination and push-pull fastening. Mechanical and electrical interface compatibility is preserved.

Q: What is the difference between contact types (female socket vs. forked)?

A: The 76314-150LF uses female socket contacts. Samtec SSQ and SSW series use forked contacts. Both contact types are designed for 0.100" pitch mating with standard 0.025" square pins. Forked contacts provide dual-point contact geometry, while female sockets provide single-point contact. Both are functionally compatible within the 100-position 0.100" pitch interface standard.

Q: Does post length affect compatibility?

A: Post length affects PCB assembly compatibility. The 76314-150LF post length is 0.135" (3.43mm). Samtec parts with 0.104" (2.64mm) posts are suitable for standard PCB thicknesses (typically 0.062" to 0.093"). Parts with 0.194" (4.93mm) posts accommodate thicker PCB assemblies. Verify PCB thickness requirements before selection.

Q: Are there voltage or current rating differences?

A: The 76314-150LF does not specify voltage or current ratings in the provided data. Samtec SSW series parts specify 4.7A per contact current rating. SSQ-150-01-G-D and SSQ-150-21-S-D specify 465VAC and 655VDC voltage ratings. Consult application requirements and detailed datasheets for specific electrical performance needs.

Q: What is the significance of RoHS compliance versions?

A: The 76314-150LF is RoHS Compliant (original RoHS directive). All Samtec substitutes are ROHS3 Compliant, representing the current RoHS 3 directive (2011/65/EU as amended). ROHS3 compliance includes additional restricted substances and is backward compatible with RoHS Compliant requirements for most applications. Verify compliance requirements for your specific regulatory jurisdiction.

Q: Can I mix contact finish specifications within an assembly?

A: Contact finish specifications (gold vs. tin mating, gold vs. tin post) are part-specific and should not be mixed within a single connector position. Select parts with consistent finish specifications across all 100 positions to ensure uniform electrical and mechanical performance.