76314-119LF Equivalent & Substitute Parts

Part Overview

The 76314-119LF is a 38-position rectangular receptacle connector manufactured by Amphenol ICC (FCI) from the BergCon® series. This through-hole, gold-plated connector is designed for board-to-board or cable applications with 0.100" (2.54mm) pitch spacing. The part is currently active in production with 1108 units in stock. Alternative components may be required due to supply constraints, packaging preferences, or specific application requirements.

Substiute Parts

76314-119LF

Amphenol ICC (FCI)In Stock: 119576314-119LF Datasheet

Current PartRFQ

PPPC192LFBN-RC

Sullins Connector SolutionsIn Stock: 7857PPPC192LFBN-RC Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

The PPPC192LFBN-RC from Sullins Connector Solutions qualifies as a functional substitute based on the following critical parameters:

Matching Parameters:

• Number of positions: 38
• Pitch - Mating: 0.100" (2.54mm)
• Number of rows: 2
• Row spacing - Mating: 0.100" (2.54mm)
• Mounting type: Through Hole
• Termination: Solder
• Contact finish - Mating: Gold
• Insulation height: 0.335" (8.51mm)
• Material flammability rating: UL94 V-0
• Moisture sensitivity level: 1 (Unlimited)
• ECCN classification: EAR99
• HTSUS code: 8536.69.4040

Connector Type Difference: The substitute is a Header connector, whereas the main part is a Receptacle. Both are board-to-board connectors with compatible mating interfaces when paired appropriately.

Parameter Comparison

Engineering Selection Recommendations

Both the 76314-119LF and PPPC192LFBN-RC are active production components with equivalent compliance certifications. The 76314-119LF maintains RoHS Compliant status, while the PPPC192LFBN-RC meets ROHS3 Compliant requirements. Both components are UL94 V-0 rated and carry MSL 1 classification.

Selection between these parts should be based on connector type requirements for your application. The receptacle configuration of the 76314-119LF pairs with header connectors, while the header configuration of the PPPC192LFBN-RC pairs with receptacle connectors. Packaging format differs between tube (76314-119LF) and tray (PPPC192LFBN-RC) configurations.

Frequently Asked Questions (FAQ)

Q: Can the PPPC192LFBN-RC directly replace the 76314-119LF?

A: Direct replacement depends on your application's connector pairing strategy. The 76314-119LF is a receptacle; the PPPC192LFBN-RC is a header. If your design currently uses a header mated to the 76314-119LF receptacle, substituting with the PPPC192LFBN-RC would require a corresponding receptacle on the mating side.

Q: Are the pitch and row spacing identical?

A: Yes. Both connectors maintain 0.100" (2.54mm) pitch for mating and 0.100" (2.54mm) row spacing. The 38-position, 2-row configuration is identical.

Q: What is the difference in packaging?

A: The 76314-119LF is supplied in tube packaging, while the PPPC192LFBN-RC is supplied in tray packaging. This affects handling, storage, and bulk ordering considerations.

Q: Are both parts RoHS compliant?

A: Yes. The 76314-119LF is RoHS Compliant, and the PPPC192LFBN-RC is ROHS3 Compliant. Both meet current regulatory requirements.

Q: What are the contact material differences?

A: The 76314-119LF uses brass contacts with gold mating finish and tin post finish. The PPPC192LFBN-RC uses phosphor bronze contacts with gold finish on both mating and post surfaces.

Q: Are the insulation heights compatible?

A: Yes. Both connectors have an insulation height of 0.335" (8.51mm), ensuring compatible board-to-board spacing.