Amphenol ICC 76314-105 Equivalent & Substitute Parts

Part Overview

The Amphenol ICC 76314-105 is a 10-position receptacle connector with 0.100" (2.54mm) pitch, designed for through-hole board-to-board applications. This BergCon® series connector features gold-plated mating contacts and is rated for solder termination with push-pull fastening. The part is currently obsolete, making equivalent substitutes necessary for ongoing production and maintenance applications. Substitute parts must maintain the same electrical and mechanical interface specifications to ensure direct compatibility.

Key Parameters

Parameter	Value
Connector Type	Receptacle
Contact Type	Female Socket
Number of Positions	10
Pitch - Mating	0.100" (2.54mm)
Number of Rows	2
Row Spacing - Mating	0.100" (2.54mm)
Mounting Type	Through Hole
Termination	Solder
Fastening Type	Push-Pull
Contact Finish - Mating	Gold
Insulation Height	0.335" (8.51mm)
Contact Length - Post	0.135" (3.43mm)
Insulation Material	Thermoplastic, Polyester, Glass Filled
Contact Material	Brass
Material Flammability Rating	UL94 V-0
RoHS Status	RoHS non-compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution for the 76314-105 is based on strict electrical and mechanical compatibility. All substitute parts must meet the following criteria:

Critical Parameters for Substitution:

Connector type: Receptacle with female socket contacts
Position count: 10 positions
Pitch: 0.100" (2.54mm) mating pitch with 0.100" row spacing
Mounting: Through-hole solder termination
Fastening: Push-pull mechanism
Contact finish: Gold-plated mating surface
Insulation height: Within tolerance of 0.335" (8.51mm)
Contact post length: Approximately 0.114" to 0.135" (2.90mm to 3.43mm)

Substitute parts are grouped by manufacturer and series. Molex C-Grid III 90151 series parts provide direct mechanical and electrical equivalence with active product status. TE Connectivity AMPMODU series and Preci-Dip 416 series parts offer functional compatibility with variations in contact material and finish specifications. The 77311-124-02LF header connector is listed as a direct manufacturer substitute despite differing in position count and connector type, indicating cross-compatibility within the Amphenol ICC product ecosystem.

Parameter Comparison

Parameter	76314-105 (Main)	0901512210 (Molex)	0901512310 (Molex)	1017008-6 (TE)	147424-5 (TE)	416-83-210-41-007101 (Preci-Dip)
Connector Type	Receptacle	Receptacle	Receptacle	Receptacle	Receptacle	Socket
Contact Type	Female Socket	Female Socket	Female Socket	Female Socket	Female Socket	Female Socket
Number of Positions	10	10	10	10	10	10
Pitch - Mating	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)
Number of Rows	2	2	2	2	2	2
Row Spacing - Mating	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)
Mounting Type	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole
Termination	Solder	Solder	Solder	Solder	Solder	Solder
Fastening Type	Push-Pull	Push-Pull	Push-Pull	Push-Pull	Push-Pull	Push-Pull
Contact Finish - Mating	Gold	Gold	Gold	Gold	Gold	Gold
Contact Finish Thickness - Mating	30.0µin (0.76µm)	15.0µin (0.38µm)	30.0µin (0.76µm)	30.0µin (0.76µm)	10.0µin (0.25µm)	29.5µin (0.75µm)
Insulation Height	0.335" (8.51mm)	0.335" (8.51mm)	0.335" (8.51mm)	0.340" (8.64mm)	0.320" (8.13mm)	0.394" (10.00mm)
Contact Length - Post	0.135" (3.43mm)	0.114" (2.90mm)	0.114" (2.90mm)	0.115" (2.92mm)	0.115" (2.92mm)	0.126" (3.20mm)
Contact Material	Brass	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Beryllium Copper
Operating Temperature	Not specified	-55°C ~ 105°C	-55°C ~ 105°C	-55°C ~ 125°C	-65°C ~ 125°C	-55°C ~ 125°C
Current Rating (Amps)	Not specified	3A	3A	Not specified	2A	3A
RoHS Status	RoHS non-compliant	ROHS3 Compliant	ROHS3 Compliant	RoHS non-compliant	RoHS non-compliant	ROHS3 Compliant

Engineering Selection Recommendations

Molex C-Grid III 90151 Series (0901512210, 0901512310) provide the closest mechanical and electrical equivalence to the 76314-105. Both parts maintain identical pitch, row spacing, insulation height, and contact configuration. The 0901512310 matches the original gold finish thickness specification at 30.0µin (0.76µm). Both Molex parts are ROHS3 compliant with active product status and high inventory availability, making them the primary recommendation for new designs and production transitions.

TE Connectivity AMPMODU Mod II (1017008-6) and AMPMODU Mod IV (147424-5) offer functional compatibility with identical position count and pitch specifications. The 1017008-6 maintains the 30.0µin gold finish thickness and supports the original operating temperature range. The 147424-5 provides extended temperature capability to -65°C but features reduced gold finish thickness at 10.0µin. Both TE parts are RoHS non-compliant, matching the original part status.

Preci-Dip 416 Series (416-83-210-41-007101, 416-83-210-41-012101, 416-87-210-41-007101, 416-87-210-41-012101) are classified as socket connectors with beryllium copper contacts and circular contact geometry, differing from the original square brass contacts. These parts are ROHS3 compliant with 3A current rating and UL94 V-0 flammability rating. Insulation height variations (0.394" or 0.354") require mechanical verification for board layout compatibility.

For applications requiring RoHS compliance, Molex 0901512210 or 0901512310 are recommended. For legacy systems matching the original RoHS non-compliant status, TE Connectivity 1017008-6 provides the closest electrical and thermal specifications.

Frequently Asked Questions (FAQ)

Q: Can the Molex 0901512210 and 0901512310 be used interchangeably with the 76314-105?

A: Both Molex parts maintain identical pitch (0.100"), row spacing (0.100"), position count (10), insulation height (0.335"), and push-pull fastening. The primary difference is gold finish thickness: 0901512210 features 15.0µin while 0901512310 matches the original 30.0µin specification. Both are mechanically and electrically compatible for board-to-board applications.

Q: What is the difference between the TE Connectivity 1017008-6 and 147424-5?

A: Both are 10-position receptacles with 0.100" pitch and gold mating contacts. The 1017008-6 operates from -55°C to 125°C with 30.0µin gold finish thickness. The 147424-5 extends the lower temperature limit to -65°C but reduces gold finish thickness to 10.0µin and current rating to 2A. Select based on thermal requirements and contact durability needs.

Q: Are Preci-Dip 416 series connectors direct replacements?

A: Preci-Dip 416 series parts maintain the same pitch, position count, and row spacing but differ in contact geometry (circular vs. square) and material (beryllium copper vs. brass). Insulation height also varies between 0.354" and 0.394" depending on part number. Verify mechanical fit and contact compatibility before substitution.

Q: Why is the 76314-105 obsolete and what are the compliance implications?

A: The 76314-105 is RoHS non-compliant, reflecting its legacy design. Molex and Preci-Dip substitutes offer ROHS3 compliance for new designs. TE Connectivity alternatives maintain RoHS non-compliant status for legacy system compatibility. Select based on regulatory requirements and application constraints.

Q: What is the significance of contact finish thickness in gold-plated connectors?

A: Gold finish thickness affects contact durability and mating cycles. The original 76314-105 specifies 30.0µin (0.76µm) mating finish. Molex 0901512310 and TE 1017008-6 match this specification. Thinner finishes (15.0µin or 10.0µin) may reduce contact life in high-cycle applications. Verify finish thickness requirements for your application.

Q: Can the 77311-124-02LF header connector substitute for the 76314-105?

A: The 77311-124-02LF is a 2-position header with male pins, fundamentally different from the 10-position female receptacle 76314-105. It is listed as a direct manufacturer substitute within Amphenol ICC's product ecosystem but is not mechanically or electrically compatible for direct replacement. Use only if application requirements specifically allow position count and contact type changes.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message