76308-209LF Equivalent & Substitute Parts

Part Overview

The 76308-209LF is a 9-position receptacle connector manufactured by Amphenol ICC (FCI) from the BergCon® series. This through-hole, gold-plated connector is designed for board-to-board or cable applications with a 0.100" (2.54mm) pitch and push-pull fastening. The part is currently active in production with 647 units in stock. Equivalent and substitute parts are identified when they maintain compatibility across critical electrical and mechanical parameters while meeting the same application requirements.

Substiute Parts

76308-209LF

Amphenol ICC (FCI)In Stock: 68776308-209LF Datasheet

Current PartRFQ

SSW-109-01-F-S

Samtec Inc.In Stock: 3608SSW-109-01-F-S Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 76308-209LF is determined by strict alignment of the following critical parameters:

• Connector type (Receptacle)
• Number of positions (9)
• Pitch specification (0.100" / 2.54mm)
• Mounting method (Through Hole)
• Termination type (Solder)
• Fastening mechanism (Push-Pull)
• Contact finish at mating surface (Gold)
• Insulation height (0.335" / 8.51mm)
• Flammability rating (UL94 V-0)
• RoHS compliance status

The substitute part SSW-109-01-F-S meets all these criteria and is therefore classified as a direct equivalent for the 76308-209LF.

Parameter Comparison

Engineering Selection Recommendations

Both the 76308-209LF and SSW-109-01-F-S are active production parts with equivalent mechanical and electrical compatibility. The 76308-209LF maintains RoHS compliance, while the SSW-109-01-F-S meets the more recent ROHS3 standard. Both connectors satisfy UL94 V-0 flammability requirements and unlimited moisture sensitivity classification. Selection between these parts should be based on availability, lead time, packaging format (Tube versus Bulk), and supply chain requirements rather than functional differences.

Frequently Asked Questions (FAQ)

Q: Can SSW-109-01-F-S be used as a direct replacement for 76308-209LF?

A: Yes. Both connectors share identical pitch (0.100"), position count (9), mounting method (through-hole), termination type (solder), fastening mechanism (push-pull), mating contact finish (gold), and insulation height (0.335"). Both meet UL94 V-0 flammability and MSL 1 requirements.

Q: What are the differences between these two parts?

A: The primary differences are manufacturer (Amphenol ICC versus Samtec), contact type (female socket versus forked), insulation material (polyester glass-filled versus liquid crystal polymer), contact material (brass versus phosphor bronze), and packaging format (tube versus bulk). The SSW-109-01-F-S also specifies operating temperature range (-55°C to 125°C) and current rating (4.7A per contact).

Q: Are there packaging considerations when switching between these parts?

A: Yes. The 76308-209LF is supplied in tube packaging, while the SSW-109-01-F-S is supplied in bulk packaging. This affects handling, storage, and inventory management procedures.

Q: Do both parts meet the same compliance standards?

A: Both parts are RoHS compliant. The 76308-209LF meets RoHS standards, while the SSW-109-01-F-S meets the updated ROHS3 standard. Both are classified as ECCN EAR99 and share the same HTSUS code (8536.69.4040).