76308-114 Equivalent & Substitute Parts

Part Overview

The 76308-114 is a 14-position receptacle connector manufactured by Amphenol ICC (FCI) in the BergCon® series. This through-hole, gold-plated connector operates at 0.100" (2.54mm) pitch and is designed for board-to-board or cable applications. The part is currently active in production with 1094 units in stock. Equivalent parts are identified when design requirements necessitate alternative sourcing, inventory availability, or compliance with specific regulatory standards.

Substiute Parts

76308-114

Amphenol ICC (FCI)In Stock: 118876308-114 Datasheet

Current PartRFQ

1-534237-2

TE Connectivity AMP ConnectorsIn Stock: 22831-534237-2 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 76308-114 is determined by the following critical parameters:

• Connector Type & Contact Configuration: Must be a receptacle with female socket contacts
• Position Count & Pitch: Exactly 14 positions at 0.100" (2.54mm) mating pitch
• Mounting & Termination: Through-hole solder termination required
• Fastening Mechanism: Push-pull fastening type
• Contact Finish: Gold-plated mating surface
• Row Configuration: Single-row layout

The substitute part 1-534237-2 (TE Connectivity AMP Connectors, AMPMODU Mod IV series) meets all these critical parameters, making it functionally equivalent for applications requiring a 14-position, 0.100" pitch receptacle connector with gold-plated contacts and through-hole solder termination.

Parameter Comparison

Engineering Selection Recommendations

Both the 76308-114 and 1-534237-2 are active production parts with unlimited moisture sensitivity ratings and identical export classifications (EAR99). The primary differentiation is regulatory compliance: the 1-534237-2 is ROHS3 compliant, while the 76308-114 is RoHS non-compliant. For applications subject to RoHS3 requirements, the 1-534237-2 is the appropriate selection. Both parts share identical mating pitch, position count, fastening mechanism, and gold contact finish specifications. Minor dimensional variations exist in insulation height (0.005" difference) and contact post length (0.020" difference), which may require PCB layout verification in space-constrained applications.

Frequently Asked Questions (FAQ)

Q: Are the 76308-114 and 1-534237-2 mechanically interchangeable?

A: Both connectors share the same 14-position, 0.100" pitch configuration with identical fastening (push-pull) and termination (solder) methods. Mechanical interchangeability is confirmed for standard board-to-board and cable applications. However, insulation height and contact post length differ slightly; verify PCB footprint and mating clearances in designs with tight spatial constraints.

Q: What is the primary reason to substitute the 76308-114 with 1-534237-2?

A: The 1-534237-2 is ROHS3 compliant, whereas the 76308-114 is RoHS non-compliant. Applications requiring RoHS3 certification must use the 1-534237-2. Both parts are otherwise functionally equivalent.

Q: Do packaging differences affect part selection?

A: The 76308-114 is supplied in bulk packaging, while the 1-534237-2 is supplied in tube packaging. Packaging selection depends on assembly process requirements and inventory management practices. Both formats contain the same connector specification.

Q: Are the contact materials compatible?

A: The 76308-114 uses brass contacts with tin post finish, while the 1-534237-2 uses phosphor bronze contacts with tin-lead post finish. Both configurations provide equivalent electrical performance for the specified 0.100" pitch receptacle application with gold-plated mating surfaces.

Q: What is the operating temperature range for these connectors?

A: The 1-534237-2 specifies an operating temperature range of -65°C to 125°C. The 76308-114 does not provide an operating temperature specification in the available data.