Amphenol ICC 75869-230 Rectangular Connector Header - Equivalent & Substitute Parts

Part Overview

The Amphenol ICC 75869-230 is a shrouded rectangular connector header designed for through-hole mounting in board-to-cable/wire applications. This component features a 4-position, 2-row configuration with 0.100" (2.54mm) pitch spacing and push-pull fastening. The part is classified as obsolete, making identification of functionally equivalent alternatives necessary for ongoing design support and procurement planning.

Substiute Parts

75869-230

Amphenol ICC (FCI)In Stock: 106675869-230 Datasheet

Current PartRFQ

75869-230LF

Amphenol ICC (FCI)In Stock: 87275869-230LF Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 75869-230 is determined by strict equivalence across the following critical parameters:

• Connector type (Header)
• Contact type (Male Pin)
• Number of positions and rows (4 positions, 2 rows)
• Pitch spacing (0.100" / 2.54mm mating and row spacing)
• Mounting method (Through Hole)
• Shrouding configuration (Shrouded - 4 Wall)
• Termination method (Solder)
• Fastening type (Push-Pull)
• Contact material and finish specifications (Phosphor Bronze with Tin plating)
• Insulation material and flammability rating (Thermoplastic, Glass Filled; UL94 V-0)

The substitute part 75869-230LF maintains identical electrical and mechanical specifications across all these parameters, with the primary distinction being product status (Active vs. Obsolete) and compliance certifications.

Parameter Comparison

Engineering Selection Recommendations

The 75869-230LF serves as the direct functional equivalent to the obsolete 75869-230. Both components share identical electrical and mechanical specifications within the Quickie™ series, ensuring pin-for-pin and footprint compatibility.

Selection between these parts should be based on regulatory and compliance requirements:

• For applications requiring RoHS compliance, the 75869-230LF is the appropriate selection.
• For applications subject to REACH regulations, the 75869-230LF is the required choice.
• The 75869-230LF is available in active production with documented inventory, whereas the 75869-230 is obsolete.
• Both parts carry UL94 V-0 flammability certification and MSL 1 moisture sensitivity rating.

Frequently Asked Questions (FAQ)

Q: Are the 75869-230 and 75869-230LF mechanically interchangeable?

A: Yes. Both components feature identical pitch spacing (0.100" / 2.54mm), row configuration (2 rows, 4 positions), mounting type (through hole), and shrouding design (4-wall shrouded). PCB footprints and mating connector interfaces are identical.

Q: What is the significance of the "LF" suffix in the 75869-230LF part number?

A: The "LF" designation indicates lead-free compliance. The 75869-230LF is RoHS compliant, whereas the 75869-230 is RoHS non-compliant. This affects solder composition and processing requirements during assembly.

Q: Can the 75869-230 be used in new designs?

A: The 75869-230 is classified as obsolete. For new designs, the 75869-230LF is the recommended selection due to active production status and RoHS compliance alignment with current regulatory standards.

Q: What packaging options are available?

A: The 75869-230LF is supplied in tube packaging. The original 75869-230 packaging specification is not documented in the available data.

Q: Are there any electrical performance differences between these parts?

A: No. Both components share identical contact material (phosphor bronze), contact finish (tin plating at 78.7µin / 2.00µm), insulation material (thermoplastic, glass filled), and flammability rating (UL94 V-0). Electrical performance is equivalent.

Q: What is the moisture sensitivity level for these connectors?

A: Both the 75869-230 and 75869-230LF carry MSL 1 (Unlimited) classification, indicating no moisture sensitivity restrictions for storage or handling.