Amphenol ICC 75869-110 Rectangular Connector Header - Equivalent & Substitute Parts

Part Overview

The Amphenol ICC 75869-110 is a vertical through-hole rectangular connector header with 64 positions at 2.54mm pitch, featuring shrouded 4-wall design and solder termination. This component is classified as obsolete, making equivalent and substitute parts necessary for ongoing production and maintenance applications. The part operates within the Quickie™ series and provides board-to-cable/wire connectivity with push-pull fastening.

Substiute Parts

75869-110

Amphenol ICC (FCI)In Stock: 92175869-110 Datasheet

Current PartRFQ

75869-110LF

Amphenol ICC (FCI)In Stock: 177675869-110LF Datasheet

DirectRFQ

09185646322

HARTINGIn Stock: 104309185646322 Datasheet

MFR RecommendedRFQ

09185646324

HARTINGIn Stock: 113809185646324 Datasheet

MFR RecommendedRFQ

09185647324

HARTINGIn Stock: 86909185647324 Datasheet

MFR RecommendedRFQ

09195105323741

HARTINGIn Stock: 120409195105323741 Datasheet

MFR RecommendedRFQ

09195646324

HARTINGIn Stock: 88109195646324 Datasheet

MFR RecommendedRFQ

3-1761603-7

TE Connectivity AMP ConnectorsIn Stock: 9313-1761603-7 Datasheet

MFR RecommendedRFQ

TSS-132-02-G-D

Samtec Inc.In Stock: 1259TSS-132-02-G-D Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the 75869-110 is determined by strict alignment of the following critical parameters:

• Connector positioning: 64 positions, 2 rows, 0.100" (2.54mm) pitch and row spacing
• Mounting configuration: Through-hole vertical orientation with shrouded 4-wall design
• Termination method: Solder termination
• Contact system: Male pin contacts with gold mating finish
• Mechanical compatibility: Board-to-cable/wire style with push-pull or latch-holder fastening

Substitute parts are grouped into two categories:

Category A - Direct Amphenol ICC Equivalent: The 75869-110LF maintains identical electrical and mechanical specifications with the primary difference being RoHS compliance status and active product status.

Category B - Cross-Manufacturer Alternatives: HARTING SEK series (09185646322, 09185646324, 09185647324, 09195646324) and TE Connectivity AMP-Latch (3-1761603-7) provide functional equivalence with minor variations in contact length specifications and insulation material composition. Samtec TSS-132-02-G-D offers similar core functionality with extended contact length and higher current rating.

Category C - Position-Variant Part: HARTING 09195105323741 is a right-angle 10-position variant and is not a direct substitute due to different position count and mounting orientation.

Parameter Comparison

Engineering Selection Recommendations

Primary Recommendation: Amphenol ICC 75869-110LF

The 75869-110LF is the direct successor to the 75869-110. It maintains identical electrical and mechanical specifications while offering active product status and RoHS compliance. This part is the preferred choice for new designs and production continuity. Packaging is supplied in tube format.

Secondary Recommendations: HARTING SEK Series (09185646322, 09185646324, 09185647324, 09195646324)

These HARTING alternatives provide functional equivalence with ROHS3 compliance and active status. The primary trade-off is the fastening mechanism change from push-pull to latch-holder. Contact length variations exist across the series, with 09185646322 featuring extended post length (0.177") compared to other variants (0.114"). All HARTING parts operate across -55°C to 125°C temperature range and are supplied in bulk packaging.

Tertiary Recommendation: TE Connectivity 3-1761603-7

The TE Connectivity AMP-Latch series part maintains push-pull fastening identical to the original 75869-110. It offers ROHS3 compliance, specified current rating of 1A per contact, and 250VAC voltage rating. Operating temperature range is -65°C to 105°C. Contact post length is 0.102", which is closest to the original specification among all alternatives.

Alternative Consideration: Samtec TSS-132-02-G-D

The Samtec Flex Stack TSS series provides the highest current rating (3A) and extended contact lengths. This part is suitable for applications requiring higher current capacity. Operating temperature range matches HARTING specifications at -55°C to 125°C. Gold finish is applied to both mating and post contacts.

Compliance Consideration

All substitute parts except the original 75869-110 are RoHS compliant. Applications subject to RoHS requirements must transition to one of the compliant alternatives. The 75869-110LF provides the most direct compliance path with identical specifications.

Frequently Asked Questions (FAQ)

Q: Can I directly replace 75869-110 with 75869-110LF?

A: Yes. The 75869-110LF is the direct equivalent with identical electrical and mechanical specifications. The primary differences are active product status and RoHS compliance. No design changes are required.

Q: What is the main difference between push-pull and latch-holder fastening?

A: Push-pull fastening (75869-110, 75869-110LF, 3-1761603-7, TSS-132-02-G-D) uses a simple push-to-connect, pull-to-disconnect mechanism. Latch-holder fastening (HARTING SEK series) provides positive mechanical locking. Selection depends on application requirements for connection security and ease of mating/unmating.

Q: Are HARTING SEK series parts pin-compatible with the original 75869-110?

A: Yes, all HARTING SEK series parts maintain 64 positions at 0.100" (2.54mm) pitch with 2-row configuration and shrouded 4-wall design. However, contact length variations exist. The 09185646322 has extended post length (0.177") compared to 09185646324 and 09185647324 (0.114"). Verify PCB hole depth and connector socket depth before substitution.

Q: What is the difference between contact length specifications?

A: Contact length - mating refers to the portion engaging with the mating connector. Contact length - post refers to the solder tail length. Variations affect PCB hole depth requirements and overall connector height. The original 75869-110 has 0.120" post length; alternatives range from 0.102" to 0.177". Verify compatibility with existing PCB designs.

Q: Which substitute offers the best temperature range?

A: HARTING SEK series and Samtec TSS-132-02-G-D both operate from -55°C to 125°C, providing the widest range among active alternatives. TE Connectivity 3-1761603-7 operates from -65°C to 105°C, offering lower temperature capability but narrower upper limit.

Q: Is the Samtec TSS-132-02-G-D suitable for high-current applications?

A: Yes. The Samtec TSS-132-02-G-D is rated for 3A current, the highest among all alternatives. This makes it suitable for applications requiring higher current capacity than the original 75869-110 specification.

Q: What packaging options are available?

A: The 75869-110LF is supplied in tube packaging. HARTING SEK series parts and TE Connectivity 3-1761603-7 are supplied in bulk packaging. Samtec TSS-132-02-G-D is supplied in bulk packaging. Verify packaging requirements for your procurement and assembly processes.

Q: Are all substitute parts RoHS compliant?

A: Yes, all substitute parts listed are RoHS compliant (RoHS or ROHS3 status). The original 75869-110 is RoHS non-compliant. Applications subject to RoHS regulations must transition to one of the compliant alternatives.

Q: Can I use 09195105323741 as a substitute?

A: No. The 09195105323741 is a right-angle 10-position connector, fundamentally different from the vertical 64-position 75869-110. It is not a functional equivalent and cannot be used as a direct substitute.