Amphenol ICC 75867-301 Rectangular Connector - Equivalent & Substitute Parts

Part Overview

The Amphenol ICC 75867-301 is a through-hole, right-angle rectangular connector header with 10 positions at 0.100" (2.54mm) pitch, designed for board-to-cable/wire applications. The connector features shrouded 4-wall construction with male pins, solder termination, and push-pull fastening. Currently listed as obsolete product status with 885 pieces in stock, this part requires identification of active equivalent and substitute options for ongoing design and procurement needs.

Key Parameters

Parameter	Value
Connector Type	Header
Contact Type	Male Pin
Pitch - Mating	0.100" (2.54mm)
Number of Positions	10
Number of Rows	2
Row Spacing - Mating	0.100" (2.54mm)
Mounting Type	Through Hole, Right Angle
Termination	Solder
Shrouding	Shrouded - 4 Wall
Contact Finish - Mating	Gold, GXT™
Material Flammability Rating	UL94 V-0
Insulation Material	Thermoplastic, Glass Filled

Substitute Part Grouping Explanation

Substitution eligibility for the 75867-301 is determined by strict alignment with the following core parameters: connector type (header), contact type (male pin), pitch (0.100"/2.54mm), number of positions (10), number of rows (2), row spacing (0.100"/2.54mm), mounting type (through hole, right angle), termination method (solder), shrouding configuration (shrouded 4-wall), and material flammability rating (UL94 V-0).

Substitute parts are grouped into two categories:

Direct Amphenol ICC Equivalents: Parts sharing identical electrical and mechanical specifications with the main part, differing only in product status (active vs. obsolete) or packaging format.

Cross-Manufacturer Alternatives: Parts from Molex and HARTING that maintain all critical mating and mounting parameters while potentially varying in contact post length, insulation material composition, or fastening mechanism (push-pull vs. latch holder).

The 76342-330LF receptacle connector is excluded from direct substitution due to fundamental differences in connector type (receptacle vs. header) and position count (60 vs. 10), making it unsuitable for applications requiring header-type male pin connectors.

Parameter Comparison

Parameter	75867-301	75867-301LF	0702471051	0702471052	09185105323	09185106321	09185106323	09185107321	09185107323
Manufacturer	Amphenol ICC	Amphenol ICC	Molex	Molex	HARTING	HARTING	HARTING	HARTING	HARTING
Product Status	Obsolete	Active	Active	Active	Active	Active	Active	Active	Active
Connector Type	Header	Header	Header	Header	Header	Header	Header	Header	Header
Contact Type	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin
Pitch - Mating	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)
Number of Positions	10	10	10	10	10	10	10	10	10
Number of Rows	2	2	2	2	2	2	2	2	2
Row Spacing - Mating	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)
Mounting Type	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle
Termination	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder
Shrouding	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall
Contact Length - Mating	0.236" (6.00mm)	0.236" (6.00mm)	0.240" (6.10mm)	0.240" (6.10mm)	0.242" (6.15mm)	0.240" (6.10mm)	0.242" (6.15mm)	0.240" (6.10mm)	0.242" (6.15mm)
Contact Length - Post	0.120" (3.05mm)	0.120" (3.05mm)	0.120" (3.05mm)	0.120" (3.05mm)	0.114" (2.90mm)	0.177" (4.50mm)	0.114" (2.90mm)	0.177" (4.50mm)	0.114" (2.90mm)
Insulation Height	0.362" (9.20mm)	0.362" (9.20mm)	0.350" (8.89mm)	0.350" (8.89mm)	0.366" (9.30mm)	0.366" (9.30mm)	0.366" (9.30mm)	0.366" (9.30mm)	0.366" (9.30mm)
Contact Shape	Square	Square	Square	Square	Square	Square	Square	Square	Square
Contact Finish - Mating	Gold, GXT™	Gold, GXT™	Gold	Gold	Gold	Gold	Not specified	Gold	Gold
Contact Material	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Copper Alloy	Copper Alloy	Copper Alloy	Copper Alloy	Copper Alloy
Insulation Material	Thermoplastic, Glass Filled	Thermoplastic, Glass Filled	PBT, Glass Filled	PBT, Glass Filled	PBT, Glass Filled	PBT, Glass Filled	PBT, Glass Filled	PBT, Glass Filled	PBT, Glass Filled
Material Flammability Rating	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0
RoHS Status	RoHS non-compliant	RoHS Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)
Fastening Type	Push-Pull	Push-Pull	Push-Pull	Push-Pull	Latch Holder	Latch Holder	Latch Holder	Latch Holder	Latch Holder
Operating Temperature	Not specified	Not specified	Not specified	Not specified	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 125°C
Inventory Status	885 Pcs	2639 Pcs	15968 Pcs	9072 Pcs	941 Pcs	1348 Pcs	1179 Pcs	911 Pcs	2013 Pcs

Engineering Selection Recommendations

Primary Recommendation: Amphenol ICC 75867-301LF

The 75867-301LF is the direct active equivalent of the obsolete 75867-301. Both parts share identical electrical and mechanical specifications, including pitch, position count, mounting configuration, and contact dimensions. The 75867-301LF carries RoHS Compliant status compared to the non-compliant original part, making it the preferred choice for new designs and procurement. With 2639 pieces in stock, availability is substantially higher than the original part.

Secondary Recommendations: Molex C-Grid 70247 Series (0702471051, 0702471052)

The Molex 0702471051 and 0702471052 maintain all critical mating and mounting parameters with the 75867-301. Both feature identical pitch (0.100"/2.54mm), position count (10), row configuration (2 rows), and right-angle through-hole mounting. Contact length variations (0.240" vs. 0.236" mating length) fall within acceptable tolerance ranges for standard 0.100" pitch connector applications. Both parts carry ROHS3 Compliant status and demonstrate high inventory availability (15968 and 9072 pieces respectively). The primary distinction between these two Molex options is contact finish thickness on the mating surface (15.0µin vs. 30.0µin).

Tertiary Recommendations: HARTING SEK Series (09185105323, 09185106321, 09185106323, 09185107321, 09185107323)

The HARTING SEK series connectors maintain core mating and mounting compatibility with the 75867-301 across all five part numbers. All feature identical pitch, position count, row spacing, and right-angle through-hole configuration. Key differences include fastening mechanism (latch holder vs. push-pull), contact post length variations (0.114" to 0.177" vs. 0.120"), and specified operating temperature range (-55°C to 125°C). These parts carry ROHS3 Compliant status. Selection among the five HARTING options depends on specific post length requirements and packaging preference (bulk vs. tray).

Compliance Considerations

The original 75867-301 is RoHS non-compliant. All substitute parts listed carry either RoHS Compliant or ROHS3 Compliant status, making them suitable for applications subject to RoHS directives. All substitute options maintain UL94 V-0 material flammability rating and MSL 1 (Unlimited) moisture sensitivity level, matching the original part's environmental specifications.

Frequently Asked Questions (FAQ)

Q: Can the 75867-301LF be used as a direct replacement for the obsolete 75867-301?

A: Yes. The 75867-301LF is the active equivalent with identical electrical and mechanical specifications. The only substantive difference is product status (active vs. obsolete) and RoHS compliance status (compliant vs. non-compliant). No design modifications are required.

Q: What are the key differences between Amphenol ICC and Molex options?

A: The Amphenol ICC 75867-301LF and Molex 0702471051/0702471052 share identical mating pitch, position count, and mounting type. Differences include contact mating length (0.236" vs. 0.240"), insulation material composition (thermoplastic vs. PBT), and insulation color (blue vs. black). These variations do not affect functional compatibility in standard 0.100" pitch connector applications.

Q: Why do HARTING parts specify operating temperature while the original part does not?

A: The HARTING SEK series provides explicit operating temperature specification (-55°C to 125°C), while the original Amphenol ICC part does not list this parameter. The HARTING specification represents the validated operating range for those connectors. For applications requiring temperature specification, HARTING parts provide documented performance data.

Q: What is the significance of fastening type differences (push-pull vs. latch holder)?

A: The original 75867-301 uses push-pull fastening, while HARTING SEK series parts use latch holder fastening. These represent different mechanical engagement mechanisms. Push-pull fastening provides quick-connect/disconnect capability, while latch holder fastening provides positive mechanical retention. Selection depends on application requirements for mating/unmating frequency and retention force.

Q: Are contact post length variations significant for PCB design?

A: Contact post length affects solder joint formation and PCB pad design. The original part specifies 0.120" (3.05mm) post length. Molex options maintain this specification. HARTING options vary between 0.114" (2.90mm) and 0.177" (4.50mm). For existing PCB designs, maintain post length consistency. For new designs, verify post length compatibility with PCB thickness and solder joint requirements.

Q: What packaging options are available?

A: The Amphenol ICC 75867-301LF is supplied in tube packaging. Molex parts are supplied in bulk packaging. HARTING parts are available in both bulk and tray packaging (09185106323 and 09185107323 in tray; others in bulk). Packaging selection affects handling, storage, and automated assembly compatibility.

Q: Are all substitute parts RoHS compliant?

A: Yes. All listed substitute parts carry either RoHS Compliant or ROHS3 Compliant status. The original 75867-301 is RoHS non-compliant. For applications subject to RoHS directives, any substitute part listed meets compliance requirements.

Q: Can HARTING parts with different contact post lengths be mixed in the same application?

A: Contact post length affects solder joint geometry and mechanical engagement with mating receptacles. Mixing different post lengths in the same application may result in inconsistent solder joint quality or mating force variation. Maintain consistent post length selection across all connectors in a given application.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message