Amphenol ICC 75867-207LF Rectangular Connector - Equivalent & Substitute Parts

Part Overview

The Amphenol ICC 75867-207LF is an active-status rectangular connector header designed for through-hole, right-angle board-to-cable/wire applications. This shrouded 40-position connector operates at 0.100" (2.54mm) pitch with solder termination and push-pull fastening. The part is RoHS Compliant with UL94 V-0 flammability rating and unlimited moisture sensitivity (MSL 1). Substitute parts are identified when equivalent electrical and mechanical parameters align with the main part's specifications, enabling direct replacement in compatible circuit designs.

Key Parameters

Parameter	Value
Connector Type	Header
Contact Type	Male Pin
Number of Positions	40
Number of Rows	2
Pitch - Mating	0.100" (2.54mm)
Row Spacing - Mating	0.100" (2.54mm)
Mounting Type	Through Hole, Right Angle
Shrouding	Shrouded - 4 Wall
Termination	Solder
Contact Shape	Square
Material Flammability Rating	UL94 V-0
RoHS Status	RoHS Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution eligibility for the 75867-207LF is determined by strict alignment of the following critical parameters:

Connector Type & Contact Configuration: Header with male pins
Position Count & Row Configuration: 40 positions in 2 rows
Pitch Specification: 0.100" (2.54mm) mating pitch and row spacing
Mounting & Orientation: Through-hole, right-angle mounting
Shrouding Design: Shrouded 4-wall construction
Termination Method: Solder termination
Contact Geometry: Square contact shape
Compliance Standards: UL94 V-0 flammability rating

The three identified substitute parts—HARTING 09185406323, HARTING 09185407323, and TE Connectivity 3-1761605-3—meet these core electrical and mechanical requirements. Variations in contact finish, insulation material composition, fastening mechanism, and operating temperature ranges do not preclude substitution when the primary functional parameters remain equivalent.

Parameter Comparison

Parameter	75867-207LF (Amphenol ICC)	09185406323 (HARTING)	09185407323 (HARTING)	3-1761605-3 (TE Connectivity)
Connector Type	Header	Header	Header	Header
Contact Type	Male Pin	Male Pin	Male Pin	Male Pin
Number of Positions	40	40	40	40
Number of Rows	2	2	2	2
Pitch - Mating	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)
Row Spacing - Mating	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)
Mounting Type	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle
Shrouding	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall
Termination	Solder	Solder	Solder	Solder
Contact Shape	Square	Square	Square	Square
Material Flammability Rating	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0
RoHS Status	RoHS Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)
Contact Length - Mating	0.236" (6.00mm)	0.242" (6.15mm)	0.242" (6.15mm)	0.240" (6.10mm)
Contact Length - Post	0.120" (3.05mm)	0.114" (2.90mm)	0.114" (2.90mm)	0.102" (2.60mm)
Insulation Height	0.362" (9.20mm)	0.366" (9.30mm)	0.366" (9.30mm)	0.350" (8.89mm)
Contact Finish - Mating	Tin	Gold	Gold	Gold
Contact Material	Phosphor Bronze	Copper Alloy	Copper Alloy	Phosphor Bronze
Insulation Material	Thermoplastic, Glass Filled	Polybutylene Terephthalate (PBT), Glass Filled	Polybutylene Terephthalate (PBT), Glass Filled	Polybutylene Terephthalate (PBT)
Fastening Type	Push-Pull	Latch Holder	Latch Holder	Push-Pull
Insulation Color	Blue	Gray	Gray	Blue
Operating Temperature	Not specified	-55°C ~ 125°C	-55°C ~ 125°C	-65°C ~ 105°C
Current Rating	Not specified	Not specified	Not specified	1A per Contact
Voltage Rating	Not specified	Not specified	Not specified	250VAC

Engineering Selection Recommendations

All three substitute parts maintain active product status and comply with UL94 V-0 flammability requirements and MSL 1 moisture sensitivity specifications. The HARTING 09185406323 and 09185407323 are functionally identical, both offering ROHS3 compliance with extended operating temperature range (-55°C to 125°C) and gold-plated mating contacts. The TE Connectivity 3-1761605-3 provides ROHS3 compliance with specified electrical ratings (1A per contact, 250VAC) and maintains push-pull fastening consistent with the original 75867-207LF design.

Selection between substitutes depends on application-specific requirements: HARTING parts suit applications requiring wider temperature operation and enhanced contact corrosion resistance through gold plating; the TE Connectivity part is appropriate for applications where documented electrical ratings and push-pull fastening mechanism are design constraints.

Frequently Asked Questions (FAQ)

Q: Can HARTING 09185406323 and 09185407323 be used interchangeably with the Amphenol ICC 75867-207LF?

A: Both HARTING parts meet the core substitution criteria: 40-position, 2-row, 0.100" pitch header with through-hole right-angle mounting, shrouded 4-wall design, and solder termination. Differences in fastening mechanism (latch holder versus push-pull), contact finish (gold versus tin), and operating temperature range do not prevent functional substitution in compatible board designs.

Q: What are the mechanical differences between the substitute parts?

A: Contact length variations exist across all parts: the 75867-207LF mating contact measures 0.236" (6.00mm), while HARTING parts measure 0.242" (6.15mm) and the TE Connectivity part measures 0.240" (6.10mm). Insulation height also varies slightly (0.350" to 0.366"). These dimensional differences remain within typical connector tolerance ranges and do not affect mating compatibility with standard 0.100" pitch receptacles.

Q: Does the change from tin to gold contact finish affect substitution eligibility?

A: Contact finish differences do not preclude substitution. Gold-plated contacts (HARTING and TE Connectivity parts) provide enhanced corrosion resistance compared to tin finish (75867-207LF). This represents a functional improvement rather than a compatibility limitation.

Q: Are there packaging differences between the main part and substitutes?

A: The 75867-207LF is supplied in tube packaging with 852 pieces in stock. HARTING 09185406323 (761 pieces) and 09185407323 (1040 pieces) are supplied in bulk packaging. TE Connectivity 3-1761605-3 is supplied in bulk packaging with 1894 pieces in stock. Packaging format does not affect connector functionality or interchangeability.

Q: Which substitute part is recommended for high-temperature applications?

A: HARTING 09185406323 and 09185407323 both specify operating temperature range of -55°C to 125°C, providing wider temperature operation than the TE Connectivity 3-1761605-3 (-65°C to 105°C). For applications requiring sustained operation above 105°C, HARTING parts are the appropriate selection.

Q: Is the TE Connectivity 3-1761605-3 suitable as a direct replacement?

A: The TE Connectivity 3-1761605-3 qualifies as a direct substitute based on core electrical and mechanical parameters. It maintains push-pull fastening identical to the original part and provides documented electrical ratings (1A per contact, 250VAC). The narrower operating temperature range (-65°C to 105°C) should be evaluated against application requirements.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message