Amphenol ICC 75867-201 Rectangular Connector Header - Equivalent & Substitute Parts

Part Overview

The Amphenol ICC 75867-201 is a through-hole, right-angle rectangular connector header with 10 positions at 2.54mm pitch, designed for board-to-cable/wire applications. This part is classified as obsolete, making equivalent and substitute parts necessary for ongoing production and maintenance applications. The connector features shrouded 4-wall construction with solder termination and push-pull fastening, suitable for general-purpose interconnect requirements.

Key Parameters

Parameter	Value
Connector Type	Header
Contact Type	Male Pin
Pitch - Mating	0.100" (2.54mm)
Number of Positions	10
Number of Rows	2
Row Spacing - Mating	0.100" (2.54mm)
Mounting Type	Through Hole, Right Angle
Shrouding	Shrouded - 4 Wall
Termination	Solder
Contact Shape	Square
Insulation Material	Thermoplastic, Glass Filled
Material Flammability Rating	UL94 V-0
Product Status	Obsolete

Substitute Part Grouping Explanation

Substitution for the 75867-201 is determined by strict equivalence across the following critical parameters:

Connector type (Header)
Contact type (Male Pin)
Mating pitch (0.100" / 2.54mm)
Position count (10 positions)
Row configuration (2 rows)
Row spacing (0.100" / 2.54mm)
Mounting orientation (Through Hole, Right Angle)
Shrouding configuration (Shrouded - 4 Wall)
Termination method (Solder)
Contact shape (Square)
Flammability rating (UL94 V-0)

Substitute parts are grouped into two categories: direct manufacturer equivalents from Amphenol ICC and cross-manufacturer alternatives from Molex, HARTING, and TE Connectivity that maintain electrical and mechanical compatibility within the specified parameter set.

Parameter Comparison

Parameter	75867-201	75867-201LF	0702471051	0702471052	09185105323	09185106323	09185107321	09185107323	09195106323	1761682-3
Manufacturer	Amphenol ICC	Amphenol ICC	Molex	Molex	HARTING	HARTING	HARTING	HARTING	HARTING	TE Connectivity
Series	Quickie™	Quickie™	C-Grid 70247	C-Grid 70247	SEK	SEK	SEK	SEK	SEK	AMP-Latch
Product Status	Obsolete	Active	Active	Active	Active	Active	Active	Active	Active	Active
Connector Type	Header	Header	Header	Header	Header	Header	Header	Header	Header	Header
Contact Type	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin
Pitch - Mating	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)
Number of Positions	10	10	10	10	10	10	10	10	10	10
Number of Rows	2	2	2	2	2	2	2	2	2	2
Row Spacing - Mating	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)
Mounting Type	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle
Shrouding	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall
Termination	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder
Fastening Type	Push-Pull	Push-Pull	Push-Pull	Push-Pull	Latch Holder	Latch Holder	Latch Holder	Latch Holder	Latch Holder	Push-Pull
Contact Shape	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square
Contact Material	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Copper Alloy	Copper Alloy	Copper Alloy	Copper Alloy	Copper Alloy	Phosphor Bronze
Insulation Material	Thermoplastic, Glass Filled	Thermoplastic, Glass Filled	Polybutylene Terephthalate (PBT), Glass Filled	Polybutylene Terephthalate (PBT), Glass Filled	Polybutylene Terephthalate (PBT), Glass Filled	Polybutylene Terephthalate (PBT), Glass Filled	Polybutylene Terephthalate (PBT), Glass Filled	Polybutylene Terephthalate (PBT), Glass Filled	Polycyclohexylenedimethylene Terephthalate (PCT), Glass Filled	Polycyclohexylenedimethylene Terephthalate (PCT)
Material Flammability Rating	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0
RoHS Status	RoHS non-compliant	RoHS Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)
ECCN	EAR99	EAR99	EAR99	EAR99	EAR99	EAR99	EAR99	EAR99	EAR99	EAR99

Engineering Selection Recommendations

The 75867-201 is classified as obsolete and should be replaced with an active product for new designs and ongoing production. The recommended primary substitute is the 75867-201LF from Amphenol ICC, which maintains identical electrical and mechanical specifications while offering active product status and RoHS compliance. This direct equivalent is the preferred choice for drop-in replacement applications.

For applications requiring cross-manufacturer alternatives, the Molex 0702471051 and 0702471052 (C-Grid 70247 series) provide full electrical and mechanical compatibility with active product status and ROHS3 compliance. Both Molex parts feature gold-plated mating contacts and are available in bulk packaging with high inventory levels.

HARTING SEK series connectors (09185105323, 09185106323, 09185107321, 09185107323, and 09195106323) offer alternative solutions with extended operating temperature range (-55°C to 125°C) and active product status. These parts employ latch holder fastening instead of push-pull mechanisms and feature copper alloy contacts. The 09195106323 uses polycyclohexylenedimethylene terephthalate (PCT) insulation material.

TE Connectivity 1761682-3 (AMP-Latch series) provides an alternative with push-pull fastening, phosphor bronze contacts, and specified electrical ratings (1A per contact, 250VAC). This part features extended operating temperature range (-65°C to 105°C) and active product status with ROHS3 compliance.

All substitute parts maintain UL94 V-0 flammability rating and MSL 1 classification. Selection should be based on fastening type requirements (push-pull versus latch holder), contact material preference, insulation material compatibility, and packaging format availability.

Frequently Asked Questions (FAQ)

Q: Can the 75867-201 be directly replaced with the 75867-201LF?

A: Yes. The 75867-201LF is a direct equivalent from the same manufacturer (Amphenol ICC) with identical electrical and mechanical specifications. The primary difference is product status (active versus obsolete) and RoHS compliance. The 75867-201LF is the recommended replacement for the obsolete 75867-201.

Q: What is the difference between push-pull and latch holder fastening types?

A: Push-pull fastening uses a simple push-to-connect, pull-to-disconnect mechanism. Latch holder fastening employs mechanical latches for connection retention. Both provide secure mating but differ in user interface and disconnection force. The 75867-201 uses push-pull fastening; HARTING SEK series alternatives use latch holder fastening.

Q: Are HARTING and Molex substitutes electrically compatible with the 75867-201?

A: Yes. All listed substitute parts maintain the same mating pitch (0.100" / 2.54mm), position count (10), row configuration (2 rows), and row spacing (0.100" / 2.54mm). Electrical compatibility is ensured through these critical parameters. Mechanical compatibility is maintained through identical shrouding (4-wall), mounting type (through-hole, right-angle), and termination method (solder).

Q: What packaging formats are available for substitute parts?

A: The 75867-201LF is available in tube packaging. Molex parts (0702471051, 0702471052) are supplied in bulk packaging. HARTING parts are available in bulk or tray packaging depending on part number. TE Connectivity 1761682-3 is supplied in bulk packaging. Packaging selection should align with production volume and handling requirements.

Q: Does RoHS compliance affect electrical performance?

A: No. RoHS compliance relates to material composition (lead-free solder and finishes) and does not affect electrical performance or mechanical compatibility. The 75867-201 is RoHS non-compliant, while all active substitute parts are RoHS or ROHS3 compliant. For new designs and regulated applications, RoHS-compliant alternatives are required.

Q: What is the significance of contact finish differences?

A: Contact finish affects corrosion resistance and contact reliability. The 75867-201 features tin-lead mating contact finish (150.0µin / 3.81µm). The 75867-201LF uses tin finish (78.7µin / 2.00µm). Molex parts feature gold finish (15.0µin to 30.0µin / 0.38µm to 0.76µm). HARTING and TE Connectivity parts use gold or unspecified finishes. All finishes are suitable for general-purpose applications; gold finishes provide enhanced corrosion resistance for harsh environments.

Q: Are there operating temperature limitations?

A: The 75867-201 does not specify an operating temperature range. HARTING SEK series parts operate from -55°C to 125°C. TE Connectivity 1761682-3 operates from -65°C to 105°C. For applications requiring extended temperature operation, HARTING alternatives provide the widest range.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message