Amphenol ICC 75867-133 Rectangular Connector Header - Equivalent & Substitute Parts

Part Overview

The Amphenol ICC 75867-133 is a through-hole, right-angle rectangular connector header with 30 positions at 0.100" (2.54mm) pitch, designed for board-to-cable/wire applications. The part is classified as obsolete, making equivalent substitutes necessary for new designs and ongoing production support. The connector features shrouded 4-wall construction with gold-plated mating contacts and phosphor bronze contact material, suitable for general-purpose electronic assemblies requiring reliable interconnection.

Substiute Parts

75867-133

Amphenol ICC (FCI)In Stock: 94275867-133 Datasheet

Current PartRFQ

75867-133LF

Amphenol ICC (FCI)In Stock: 117675867-133LF Datasheet

DirectRFQ

76342-325LF

Amphenol ICC (FCI)In Stock: 148576342-325LF Datasheet

DirectRFQ

09185307904

HARTINGIn Stock: 76009185307904 Datasheet

MFR RecommendedRFQ

HTSS-115-04-G-D-LA

Samtec Inc.In Stock: 774HTSS-115-04-G-D-LA Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the 75867-133 is determined by the following critical parameters:

• Connector Type & Contact Configuration: Header with male pins
• Position Count & Arrangement: 30 positions in 2 rows
• Pitch Specification: 0.100" (2.54mm) mating pitch and row spacing
• Mounting Orientation: Through-hole mounting (right-angle or vertical acceptable with design review)
• Shrouding & Fastening: Shrouded 4-wall construction with push-pull fastening
• Contact Material & Finish: Phosphor bronze with gold mating surface
• Insulation Material: Thermoplastic or equivalent glass-filled polymer

Substitute parts are grouped into two categories:

Category 1 - Direct Functional Equivalents (Same Connector Type & Orientation)

• 75867-133LF (Amphenol ICC): Active product, identical electrical and mechanical specifications with RoHS compliance upgrade
• HTSS-115-04-G-D-LA (Samtec Inc.): Right-angle header, same pitch and position count, alternative insulation material (LCP)

Category 2 - Functional Alternatives (Different Connector Type)

• 09185307904 (HARTING): Vertical-mount header, same pitch and position count, requires PCB layout modification
• 76342-325LF (Amphenol ICC): Receptacle connector, different connector type, not directly interchangeable without mating header redesign

Parameter Comparison

Engineering Selection Recommendations

Primary Recommendation: 75867-133LF

The 75867-133LF is the direct successor to the obsolete 75867-133. Both parts share identical electrical and mechanical specifications, including connector type, position count, pitch, mounting orientation, shrouding, and contact materials. The 75867-133LF offers the advantage of active product status and RoHS compliance, making it suitable for new designs and production environments with regulatory requirements. Packaging is supplied in tube format. No design modifications are required for direct substitution.

Secondary Recommendation: HTSS-115-04-G-D-LA

The Samtec HTSS-115-04-G-D-LA maintains the same 30-position, 2.54mm pitch header configuration in right-angle mounting. This part features Liquid Crystal Polymer (LCP) insulation material instead of thermoplastic, offering enhanced thermal and mechanical properties. Operating temperature range is specified as -55°C to 125°C. RoHS3 compliance is confirmed. This option is suitable for applications requiring extended temperature performance or superior insulation material properties.

Alternative Consideration: 09185307904

The HARTING 09185307904 provides a 30-position, 2.54mm pitch header but in vertical-mount orientation rather than right-angle. This part requires PCB layout modification and is suitable only when vertical mounting is acceptable. RoHS3 compliance and specified operating temperature range (-55°C to 125°C) are provided. Contact material is copper alloy rather than phosphor bronze.

Not Recommended for Direct Substitution: 76342-325LF

The 76342-325LF is a receptacle connector with 50 positions and female socket contacts. This part is fundamentally different in connector type and contact configuration, requiring complete mating interface redesign. It is included in the reference data but is not a functional equivalent for the 75867-133 header application.

Frequently Asked Questions (FAQ)

Q: Can the 75867-133LF be used as a direct replacement for the 75867-133?

A: Yes. The 75867-133LF is electrically and mechanically identical to the 75867-133. Both are 30-position, 2.54mm pitch right-angle headers with shrouded 4-wall construction, phosphor bronze contacts, and gold mating finish. The primary differences are product status (active vs. obsolete) and RoHS compliance. No design changes are required.

Q: What is the difference between the 75867-133LF and HTSS-115-04-G-D-LA?

A: Both are 30-position, 2.54mm pitch right-angle headers. The 75867-133LF uses thermoplastic glass-filled insulation, while the HTSS-115-04-G-D-LA uses Liquid Crystal Polymer (LCP). The Samtec part specifies operating temperature range (-55°C to 125°C) and offers enhanced thermal stability. Contact finish thickness differs: 75867-133LF has 30.0µin mating finish, while HTSS-115-04-G-D-LA has 10.0µin. Selection depends on thermal requirements and insulation material compatibility.

Q: Can the HARTING 09185307904 replace the 75867-133?

A: The HARTING 09185307904 shares the same 30-position, 2.54mm pitch configuration but uses vertical mounting instead of right-angle. Direct substitution requires PCB layout modification. The part is suitable only if vertical orientation is acceptable in the application. Contact material is copper alloy rather than phosphor bronze.

Q: What does RoHS compliance mean for connector selection?

A: RoHS (Restriction of Hazardous Substances) compliance indicates the part meets environmental regulations restricting lead, cadmium, mercury, and other hazardous materials. The 75867-133 is RoHS non-compliant, while 75867-133LF, HTSS-115-04-G-D-LA, and 09185307904 are RoHS compliant. For new designs and regulated industries, RoHS-compliant substitutes are required.

Q: What is the significance of the "LF" suffix in 75867-133LF?

A: The "LF" suffix indicates lead-free termination and RoHS compliance. This designation distinguishes the part from the original 75867-133 and ensures compliance with environmental and regulatory standards.

Q: Are there packaging differences between substitute parts?

A: Yes. The 75867-133LF is supplied in tube packaging. The 09185307904 is supplied in bulk packaging. The HTSS-115-04-G-D-LA packaging is not specified in the provided data. Packaging format may affect procurement, handling, and storage requirements.

Q: What is Moisture Sensitivity Level (MSL)?

A: MSL indicates the sensitivity of a component to moisture during storage and handling. All listed parts have MSL 1 (Unlimited), meaning they have unlimited shelf life and do not require special moisture-controlled storage conditions.