Amphenol ICC 75867-106 Rectangular Connector Header — Equivalent & Substitute Parts

Part Overview

The Amphenol ICC 75867-106 is a through-hole, right-angle rectangular connector header with 34 positions at 0.100" (2.54mm) pitch, designed for board-to-cable/wire applications. The part features a shrouded 4-wall design with solder termination and push-pull fastening. Currently listed as obsolete with 932 units in stock, this connector is part of the Quickie™ series and carries UL94 V-0 flammability rating with RoHS non-compliant status.

Due to its obsolete product status, equivalent and substitute parts from active manufacturers are necessary for new designs and long-term supply chain continuity. Suitable alternatives maintain the core electrical and mechanical specifications while offering improved compliance certifications and availability.

Key Parameters

Parameter	Value
Connector Type	Header
Contact Type	Male Pin
Number of Positions	34
Number of Rows	2
Pitch - Mating	0.100" (2.54mm)
Row Spacing - Mating	0.100" (2.54mm)
Mounting Type	Through Hole, Right Angle
Shrouding	Shrouded - 4 Wall
Termination	Solder
Fastening Type	Push-Pull
Contact Finish - Mating	Gold, GXT™
Contact Material	Phosphor Bronze
Insulation Material	Thermoplastic, Glass Filled
Material Flammability Rating	UL94 V-0
Moisture Sensitivity Level (MSL)	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution for the 75867-106 is determined by strict equivalence across the following critical parameters:

Primary Substitution Criteria:

Connector type (Header)
Contact type (Male Pin)
Number of positions (34)
Number of rows (2)
Pitch - mating (0.100" / 2.54mm)
Row spacing - mating (0.100" / 2.54mm)
Mounting type (Through Hole, Right Angle)
Shrouding (Shrouded - 4 Wall)
Termination (Solder)
Fastening type (Push-Pull or Latch Holder variants)
Contact finish - mating (Gold)
Contact material (Phosphor Bronze or Copper Alloy)
Insulation material (Thermoplastic or Polybutylene Terephthalate, Glass Filled)
Material flammability rating (UL94 V-0)
MSL rating (1 / Unlimited)

Substitute parts are grouped into two categories:

Category 1: Direct Amphenol ICC Equivalents Parts maintaining identical specifications with improved compliance status (RoHS compliant, active product status).

Category 2: Cross-Manufacturer Equivalents Parts from Molex, HARTING, and TE Connectivity that maintain all critical electrical and mechanical parameters while offering alternative fastening mechanisms (Push-Pull or Latch Holder) and material compositions (Phosphor Bronze or Copper Alloy).

Parameter Comparison

Parameter	75867-106 (Main)	75867-106LF	0702473451 (Molex)	09185345323 (HARTING)	09185346323 (HARTING)	09185347323 (HARTING)	09195346323 (HARTING)	1-1761682-1 (TE)	103310-7 (TE)	3-1761605-1 (TE)
Connector Type	Header	Header	Header	Header	Header	Header	Header	Header	Header	Header
Contact Type	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin
Number of Positions	34	34	34	34	34	34	34	34	34	34
Number of Rows	2	2	2	2	2	2	2	2	2	2
Pitch - Mating	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)
Row Spacing - Mating	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)
Mounting Type	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle
Shrouding	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall
Termination	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder
Fastening Type	Push-Pull	Push-Pull	Push-Pull	Latch Holder	Latch Holder	Latch Holder	Latch Holder	Push-Pull	Push-Pull	Push-Pull
Contact Finish - Mating	Gold, GXT™	Gold, GXT™	Gold	Gold	Gold	Gold	Not specified	Gold	Gold or Gold-Palladium	Gold
Contact Material	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Copper Alloy	Copper Alloy	Copper Alloy	Copper Alloy	Phosphor Bronze	Brass	Phosphor Bronze
Insulation Material	Thermoplastic, Glass Filled	Thermoplastic, Glass Filled	Polybutylene Terephthalate (PBT), Glass Filled	Polybutylene Terephthalate (PBT), Glass Filled	Polybutylene Terephthalate (PBT), Glass Filled	Polybutylene Terephthalate (PBT), Glass Filled	Polycyclohexylenedimethylene Terephthalate (PCT), Glass Filled	Polycyclohexylenedimethylene Terephthalate (PCT)	Not specified	Polybutylene Terephthalate (PBT)
Material Flammability Rating	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0
RoHS Status	RoHS non-compliant	RoHS Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	Not applicable	ROHS3 Compliant
Product Status	Obsolete	Active	Active	Active	Active	Active	Active	Active	Active	Active
MSL Rating	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)

Engineering Selection Recommendations

Primary Recommendation: 75867-106LF (Amphenol ICC)

The 75867-106LF is the direct successor to the 75867-106, maintaining identical electrical and mechanical specifications while achieving RoHS compliance and active product status. This part is packaged in tube format with 1425 units in stock, providing immediate availability and design continuity with minimal qualification effort.

Secondary Recommendations for Cross-Manufacturer Substitution:

TE Connectivity 3-1761605-1 (AMP-Latch Series)

This part maintains Phosphor Bronze contact material and gold mating finish with 2998 units in stock. It features push-pull fastening, ROHS3 compliance, and operating temperature range of -65°C to 105°C with 1A per contact current rating and 250VAC voltage rating. The AMP-Latch series provides established reliability in industrial applications.

Molex 0702473451 (C-Grid 70247 Series)

This header offers ROHS3 compliance with 700 units available. It features push-pull fastening, Phosphor Bronze contacts, and gold mating finish. The C-Grid 70247 series is suitable for automotive, general purpose, lighting, medical, and telecommunications applications.

HARTING 09185347323 (SEK Series)

This connector provides ROHS3 compliance with 811 units in stock. It features latch holder fastening, copper alloy contacts, and gold mating finish. Operating temperature range extends from -55°C to 125°C, offering enhanced thermal performance for industrial environments.

Compliance Considerations:

Parts with ROHS3 compliance (75867-106LF, 0702473451, 09185345323, 09185346323, 09185347323, 09195346323, 1-1761682-1, 3-1761605-1) are preferred for new designs and applications subject to RoHS directives. The original 75867-106 and TE Connectivity 103310-7 carry non-compliant or not-applicable status and should be reserved for legacy system maintenance only.

Frequently Asked Questions (FAQ)

Q: Can I directly replace 75867-106 with 75867-106LF?

A: Yes. The 75867-106LF is the direct equivalent with identical electrical and mechanical specifications. The primary differences are RoHS compliance status (compliant vs. non-compliant) and product status (active vs. obsolete). No design changes are required.

Q: What is the difference between push-pull and latch holder fastening types?

A: Push-pull fastening uses a simple push-to-connect, pull-to-disconnect mechanism. Latch holder fastening incorporates mechanical latches for more secure mating. Both are functionally equivalent for the 34-position 2.54mm pitch connector, but latch holder variants (HARTING SEK series) provide additional mechanical retention in high-vibration environments.

Q: Are HARTING SEK series connectors (09185345323, 09185346323, 09185347323, 09195346323) fully compatible?

A: Yes, all HARTING SEK series parts listed maintain the critical parameters: 34 positions, 2.54mm pitch, 2-row configuration, through-hole right-angle mounting, shrouded 4-wall design, solder termination, and UL94 V-0 flammability rating. The primary differences are fastening type (latch holder vs. push-pull), contact material (copper alloy vs. phosphor bronze), and insulation material composition. These differences do not affect electrical or mechanical compatibility.

Q: What is the significance of contact finish thickness?

A: Contact finish thickness affects durability and wear resistance. The main part specifies 30.0µin (0.76µm) mating finish. Substitute parts vary: Molex 0702473451 specifies 15.0µin (0.38µm), while TE Connectivity parts specify 30.0µin (0.76µm) or higher. Thicker finishes provide extended contact life in high-cycle mating applications.

Q: Can I use 76342-309LF as a substitute?

A: No. The 76342-309LF is a receptacle connector with 18 positions, not a header with 34 positions. It is not electrically or mechanically compatible with the 75867-106.

Q: Which substitute offers the widest operating temperature range?

A: HARTING SEK series connectors (09185345323, 09185346323, 09185347323, 09195346323) and TE Connectivity 1-1761682-1 offer -55°C to 125°C operating range, compared to the original part with unspecified operating temperature. This extended range is suitable for industrial and automotive applications subject to extreme thermal conditions.

Q: Are all substitutes RoHS compliant?

A: No. The original 75867-106 is RoHS non-compliant. TE Connectivity 103310-7 carries "Not applicable" status. All other listed substitutes (75867-106LF, 0702473451, HARTING SEK series, 1-1761682-1, 3-1761605-1) are ROHS3 compliant.

Q: What packaging formats are available?

A: 75867-106LF is supplied in tube packaging. Molex 0702473451, HARTING SEK series, TE Connectivity 1-1761682-1, 103310-7, and 3-1761605-1 are supplied in bulk packaging. Tube packaging is preferred for automated assembly processes, while bulk packaging is suitable for manual assembly or high-volume procurement.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message