Amphenol ICC 75867-102 Rectangular Connector - Equivalent & Substitute Parts

Part Overview

The Amphenol ICC 75867-102 is a shrouded right-angle header connector with 14 positions at 0.100" (2.54mm) pitch, designed for through-hole board-to-cable/wire applications. This part is classified as obsolete, making identification of functionally equivalent alternatives essential for ongoing design support and procurement continuity. The connector features a 2-row configuration with push-pull fastening and gold-plated mating contacts suitable for general-purpose electronic assemblies.

Substiute Parts

75867-102

Amphenol ICC (FCI)In Stock: 92575867-102 Datasheet

Current PartRFQ

75867-102LF

Amphenol ICC (FCI)In Stock: 149475867-102LF Datasheet

DirectRFQ

76342-305LF

Amphenol ICC (FCI)In Stock: 132276342-305LF Datasheet

DirectRFQ

5103311-2

TE Connectivity AMP ConnectorsIn Stock: 14805103311-2 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 75867-102 is determined by the following critical parameters: connector type (header), contact type (male pin), number of positions (14), number of rows (2), mating pitch (0.100"), row spacing (0.100"), mounting type (through hole, right angle), shrouding configuration (shrouded 4-wall), and fastening type (push-pull). Parts meeting these core specifications are functionally interchangeable at the board interface level.

The substitute parts identified fall into two categories:

Direct Amphenol ICC Substitutes: Parts 75867-102LF and 76342-305LF share the same manufacturer lineage and Quickie™/Dubox™ series compatibility. The 75867-102LF is an active-status variant with identical mechanical and electrical specifications. The 76342-305LF is a receptacle configuration (10-position) that maintains pitch and row spacing compatibility but differs in contact type and position count.

Cross-Manufacturer Substitute: Part 5103311-2 from TE Connectivity AMP Connectors meets all critical mechanical parameters (14-position, 2-row, 0.100" pitch, right-angle through-hole, shrouded 4-wall, push-pull) and represents an active-status alternative from a different manufacturer ecosystem.

Parameter Comparison

Engineering Selection Recommendations

For Direct Replacement (Preferred): The 75867-102LF is the primary substitute for the obsolete 75867-102. Both parts are manufactured by Amphenol ICC within the Quickie™ series and share identical mechanical, electrical, and dimensional specifications. The 75867-102LF carries active product status and RoHS compliance, addressing the regulatory limitations of the original part. Packaging is supplied in tube format.

For Cross-Manufacturer Compatibility: The TE Connectivity 5103311-2 (AMP-Latch series) provides a functionally equivalent alternative with all critical mechanical parameters matched. This part is active-status and ROHS3 compliant. Contact material differs (brass vs. phosphor bronze) and operating temperature range is specified (-65°C ~ 105°C). Current rating is specified at 1A per contact. This option is suitable for applications requiring multi-source qualification.

For Receptacle Applications: The 76342-305LF is not a direct substitute due to its receptacle configuration (female socket) and reduced position count (10 vs. 14). This part is applicable only in applications where a mating receptacle is required and position count reduction is acceptable.

Frequently Asked Questions (FAQ)

Q: Can the 75867-102LF be used as a direct replacement for the 75867-102?

A: Yes. The 75867-102LF maintains identical specifications for connector type, contact type, position count, pitch, row spacing, mounting orientation, shrouding, and fastening mechanism. The primary differences are product status (active vs. obsolete) and RoHS compliance (compliant vs. non-compliant).

Q: What are the key differences between the 75867-102LF and the TE Connectivity 5103311-2?

A: Both parts meet the core mechanical requirements (14-position, 2-row, 0.100" pitch, right-angle through-hole, shrouded 4-wall, push-pull fastening). Differences include manufacturer (Amphenol ICC vs. TE Connectivity), contact material (phosphor bronze vs. brass), contact length specifications (0.236" mating vs. 0.240" mating), and operating temperature range (not specified vs. -65°C ~ 105°C). The 5103311-2 specifies 1A per contact current rating.

Q: Why is the 76342-305LF listed as a substitute if it has only 10 positions?

A: The 76342-305LF is listed based on pitch and row spacing compatibility (0.100" mating pitch, 0.100" row spacing, 2-row configuration). However, it is a receptacle connector with 10 positions, making it unsuitable for direct replacement of the 14-position header. This part is applicable only in applications requiring a mating receptacle interface with reduced position requirements.

Q: Are there compliance considerations when switching from the 75867-102 to a substitute?

A: Yes. The original 75867-102 is RoHS non-compliant. Both the 75867-102LF and 5103311-2 are RoHS compliant (RoHS and ROHS3 respectively), which may be required for new designs or regulatory compliance in certain markets. The 76342-305LF is also RoHS compliant.

Q: What packaging formats are available for the substitute parts?

A: The 75867-102LF and 5103311-2 are supplied in tube packaging. The 76342-305LF is also supplied in tube packaging. Original packaging information for the 75867-102 was not specified.

Q: Can the 5103311-2 be used in applications requiring RoHS compliance?

A: Yes. The 5103311-2 is ROHS3 compliant and suitable for applications with RoHS requirements. It maintains all critical mechanical specifications of the 75867-102 and provides active product status support.