Amphenol ICC 75654-002 Equivalent & Substitute Parts

Part Overview

The Amphenol ICC 75654-002 is a pin contact for rectangular connectors, designed for wire gauges 22-26 AWG with tin-lead finish. This component is part of the Mini-PV™ and Basics+ series and maintains active product status. Substitute parts are identified when equivalent electrical and mechanical parameters align with the original specification, ensuring functional compatibility in connector assemblies.

Substiute Parts

75654-002

Amphenol ICC (FCI)In Stock: 87975654-002 Datasheet

Current PartRFQ

102107-3

TE Connectivity AMP ConnectorsIn Stock: 47969102107-3 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the 75654-002 are identified based on the following critical parameters:

• Wire gauge compatibility: 22-26 AWG
• Contact type: Pin configuration
• Termination method: Crimp
• Contact finish thickness: 100.0µin (2.54µm)
• Moisture sensitivity level: 1 (Unlimited)
• Connector category: Rectangular connectors

The TE Connectivity AMP Connectors 102107-3 meets these core electrical and mechanical requirements, making it a functional equivalent for applications requiring pin contacts with identical wire gauge and crimp termination specifications.

Parameter Comparison

Engineering Selection Recommendations

Both the 75654-002 and 102107-3 maintain active product status and share identical wire gauge, termination method, and contact finish thickness specifications. The primary distinction is the contact finish material: the 75654-002 uses tin-lead, while the 102107-3 uses tin. The 102107-3 carries REACH Affected status, whereas the 75654-002 is RoHS non-compliant. Selection between these parts should be based on application-specific finish requirements and regulatory compliance needs.

Frequently Asked Questions (FAQ)

Q: Can the TE Connectivity 102107-3 directly replace the Amphenol ICC 75654-002?

A: The 102107-3 is electrically and mechanically compatible for applications requiring 22-26 AWG crimp pin contacts with 100.0µin finish thickness. The contact finish difference (tin versus tin-lead) must be evaluated against application requirements.

Q: What is the significance of the contact finish difference?

A: The 75654-002 features tin-lead finish, while the 102107-3 features tin finish. Both maintain the same thickness specification of 100.0µin (2.54µm). Contact finish selection depends on solderability requirements and environmental exposure conditions.

Q: Are both parts suitable for unlimited moisture exposure?

A: Both parts carry MSL 1 (Unlimited) rating, indicating no moisture sensitivity restrictions during storage or handling.

Q: What are the packaging considerations?

A: Both parts are supplied in bulk packaging. Verify connector housing compatibility with the selected pin contact series before assembly.

Q: Do regulatory requirements differ between these parts?

A: The 75654-002 is RoHS non-compliant, while the 102107-3 status is not applicable for RoHS. The 102107-3 carries REACH Affected designation. Confirm regulatory compliance requirements for your application before selection.