Amphenol ICC 75160-150-10LF Equivalent & Substitute Parts

Part Overview

The Amphenol ICC 75160-150-10LF is a rectangular connector header for through-hole mounting with 10 positions at 0.100" (2.54mm) pitch. This component is classified as obsolete, making equivalent and substitute parts necessary for ongoing design support and production continuity. The BERGSTIK® series connector features male pins with gold-plated mating contacts, solder termination, and unshrouded design suitable for board-to-board applications.

Key Parameters

Parameter	Value
Manufacturer Part Number	75160-150-10LF
Manufacturer	Amphenol ICC (FCI)
Category	Rectangular Connectors
Connector Type	Header
Contact Type	Male Pin
Pitch - Mating	0.100" (2.54mm)
Number of Positions	10
Number of Rows	1
Mounting Type	Through Hole
Termination	Solder
Fastening Type	Push-Pull
Contact Finish - Mating	Gold, GXT™
Contact Material	Phosphor Bronze
Insulation Material	Thermoplastic
Operating Temperature	-65°C ~ 130°C
Current Rating	5A
Voltage Rating	110V
Material Flammability Rating	UL94 V-0
RoHS Status	RoHS Compliant
Product Status	Obsolete

Substitute Part Grouping Explanation

Substitution for the 75160-150-10LF is determined by the following critical parameters:

Pitch - Mating: 0.100" (2.54mm) — mechanical compatibility requirement
Number of Positions: 10 — functional requirement
Number of Rows: 1 — form factor requirement
Connector Type: Header — functional classification
Contact Type: Male Pin — mating interface requirement
Mounting Type: Through Hole — PCB assembly requirement
Termination: Solder — assembly process requirement
Fastening Type: Push-Pull — mechanical engagement requirement
Material Flammability Rating: UL94 V-0 — safety compliance requirement

Substitute parts are grouped into two categories based on contact geometry and finish specifications:

Group 1: Square Contact Geometry with Tin Finish — Molex KK254 series (0022284100, 0022303107) provide direct mechanical and electrical compatibility with simplified contact finish specifications.

Group 2: Circular Contact Geometry with Gold or Tin Finish — Preci-Dip 350 series and Mill-Max 800 series offer alternative contact geometries while maintaining all critical electrical and mechanical parameters. These parts support both solder and press-fit termination options.

Parameter Comparison

Parameter	75160-150-10LF (Main)	0022284100 (Molex)	0022303107 (Molex)	350-10-110-00-013101 (Preci-Dip)	350-10-110-01-666101 (Preci-Dip)	350-80-110-00-013101 (Preci-Dip)	350-80-110-01-666101 (Preci-Dip)	350-V3-110-00-006101 (Preci-Dip)	800-10-010-10-001000 (Mill-Max)	800-10-010-10-002000 (Mill-Max)	800-80-010-10-001101 (Preci-Dip)
Pitch - Mating	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)
Number of Positions	10	10	10	10	10	10	10	10	10	10	10
Number of Rows	1	1	1	1	1	1	1	1	1	1	1
Connector Type	Header	Header, Breakaway	Header, Breakaway	Header	Header	Header	Header	Header	Header	Header	Header
Contact Type	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin
Mounting Type	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole
Termination	Solder	Solder	Solder	Solder	Press-Fit, Solder	Solder	Press-Fit, Solder	Solder	Solder	Solder	Solder
Fastening Type	Push-Pull	Push-Pull	Push-Pull	Push-Pull	Push-Pull	Push-Pull	Push-Pull	Push-Pull	Push-Pull	Push-Pull	Push-Pull
Contact Shape	Square	Square	Square	Circular	Circular	Circular	Circular	Circular	Circular	Circular	Circular
Contact Finish - Mating	Gold, GXT™	Tin	Tin	Gold	Gold	Tin	Tin	Gold	Gold	Gold	Tin
Contact Material	Phosphor Bronze	—	—	Brass	Brass	Brass	Brass	Brass	Brass Alloy	Brass Alloy	Brass
Insulation Material	Thermoplastic	Polyamide (PA), Nylon, Glass Filled	Polyamide (PA), Nylon, Glass Filled	Polycyclohexylenedimethylene Terephthalate (PCT), Polyester, Glass Filled	Polycyclohexylenedimethylene Terephthalate (PCT), Polyester, Glass Filled	Polycyclohexylenedimethylene Terephthalate (PCT), Polyester, Glass Filled	Polycyclohexylenedimethylene Terephthalate (PCT), Polyester, Glass Filled	Polycyclohexylenedimethylene Terephthalate (PCT), Polyester, Glass Filled	Polycyclohexylenedimethylene Terephthalate (PCT)	Polycyclohexylenedimethylene Terephthalate (PCT)	Polycyclohexylenedimethylene Terephthalate (PCT), Polyester, Glass Filled
Operating Temperature	-65°C ~ 130°C	—	—	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 125°C	—	—	-55°C ~ 125°C
Current Rating	5A	—	—	3A	3A	3A	3A	3A	—	—	3A
Voltage Rating	110V	—	—	150VDC	150VDC	150VDC	150VDC	150VDC	—	—	150VDC
Material Flammability Rating	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	—	—	UL94 V-0
RoHS Status	RoHS Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
Product Status	Obsolete	Active	Active	Active	Active	Active	Active	Active	Active	Active	Active

Engineering Selection Recommendations

All listed substitute parts maintain active product status with current manufacturer support, addressing the obsolescence of the original 75160-150-10LF component. Selection criteria are based on compliance certifications and product availability:

Primary Recommendation: Molex 0022284100

The Molex KK254 series part 0022284100 provides the most direct substitution path. This part maintains identical pitch (0.100"), position count (10), row configuration (1), and connector type (header) specifications. It features UL94 V-0 flammability rating and ROHS3 compliance. The square contact geometry matches the original design intent. Inventory availability is substantial at 2537 pieces.

Secondary Recommendation: Preci-Dip 350 Series

The Preci-Dip 350 series (350-10-110-00-013101, 350-10-110-01-666101, 350-80-110-00-013101, 350-80-110-01-666101, 350-V3-110-00-006101) offers circular contact geometry with gold or tin finish options. These parts maintain UL94 V-0 compliance and ROHS3 status. Operating temperature range (-55°C ~ 125°C) is slightly narrower than the original. Current rating is 3A versus 5A on the original. Voltage rating is 150VDC versus 110V on the original. Press-fit termination options are available on selected variants (350-10-110-01-666101, 350-80-110-01-666101).

Tertiary Recommendation: Mill-Max 800 Series

The Mill-Max 800 series (800-10-010-10-001000, 800-10-010-10-002000) provides circular contact geometry with gold finish. These parts maintain ROHS3 compliance. Operating temperature, current rating, and voltage rating specifications are not provided in available documentation. Inventory availability is high at 1943 and 1571 pieces respectively.

Preci-Dip 800-80-010-10-001101

This variant combines Preci-Dip manufacturing with the 800 series designation. It features tin finish, UL94 V-0 compliance, and ROHS3 status with 675 pieces in inventory.

Frequently Asked Questions (FAQ)

Q: Can I use a substitute part with a different contact shape (circular vs. square)?

A: Yes. The critical substitution parameters are pitch (0.100"), position count (10), row configuration (1), connector type (header), contact type (male pin), mounting type (through hole), termination (solder), and fastening type (push-pull). Contact shape variation does not affect mechanical or electrical compatibility in board-to-board applications.

Q: What is the difference between gold and tin contact finishes?

A: Both finishes are provided in the substitute parts. Gold finish (0.25µm to 0.76µm thickness) offers superior corrosion resistance and is specified on the original 75160-150-10LF. Tin finish (100.0µin / 2.54µm thickness) provides cost efficiency while maintaining electrical performance. Selection depends on application environmental requirements and cost constraints.

Q: Are press-fit termination options compatible with my solder assembly process?

A: Press-fit termination is an alternative to solder termination. Parts offering both options (Preci-Dip 350-10-110-01-666101, 350-80-110-01-666101) can be assembled using either method. Confirm your PCB design supports the selected termination type before component procurement.

Q: What is the significance of the "Breakaway" connector type designation on Molex parts?

A: Breakaway designation indicates the connector can be separated into individual positions if required. This does not affect compatibility with standard board-to-board applications where the full 10-position header is used as a single unit.

Q: How do operating temperature ranges compare between the original and substitutes?

A: The original 75160-150-10LF operates from -65°C to 130°C. Most substitute parts (Preci-Dip 350 series, Preci-Dip 800-80-010-10-001101) operate from -55°C to 125°C. Mill-Max 800 series operating temperature is not specified. Confirm your application temperature requirements fall within the selected substitute part's range.

Q: What is the current rating difference between the original and substitutes?

A: The original 75160-150-10LF is rated for 5A. Preci-Dip 350 series and Preci-Dip 800-80-010-10-001101 are rated for 3A. Mill-Max 800 series current rating is not specified. Confirm your application current requirements do not exceed the selected substitute part's rating.

Q: Are all substitute parts RoHS compliant?

A: Yes. All listed substitute parts carry ROHS3 compliance certification. The original part carries RoHS Compliant status. Both designations indicate compliance with RoHS Directive requirements.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message