Amphenol ICC 75160-122-36 Equivalent & Substitute Parts

Part Overview

The Amphenol ICC 75160-122-36 is a rectangular connector header with 36 vertical positions at 0.100" (2.54mm) pitch, designed for through-hole board-to-board applications. This part is classified as obsolete, making equivalent and substitute parts necessary for ongoing design support and procurement. The connector features unshrouded design, solder termination, and push-pull fastening with gold-plated mating contacts rated for 5A at 110V operation across -65°C to 130°C temperature range.

Key Parameters

Parameter	Value
Manufacturer Part Number	75160-122-36
Manufacturer	Amphenol ICC (FCI)
Connector Type	Header
Number of Positions	36
Pitch - Mating	0.100" (2.54mm)
Number of Rows	1
Mounting Type	Through Hole
Termination	Solder
Contact Type	Male Pin
Shrouding	Unshrouded
Contact Finish - Mating	Gold, GXT™
Current Rating	5A
Voltage Rating	110V
Operating Temperature	-65°C ~ 130°C
Product Status	Obsolete
RoHS Status	RoHS non-compliant

Substitute Part Grouping Explanation

Substitution for the 75160-122-36 is determined by the following critical parameters: 36-position count, 0.100" (2.54mm) mating pitch, single-row configuration, through-hole mounting, solder termination, male pin contact type, and unshrouded design. All substitute parts listed maintain these core electrical and mechanical specifications to ensure form, fit, and function compatibility.

The substitute parts are grouped into two categories based on product status and compliance:

Category 1: Active Status with RoHS3 Compliance — Parts meeting current regulatory requirements while maintaining full electrical and mechanical compatibility.

Category 2: Active Status with Alternative Compliance — Parts with active product status offering functional equivalence with different contact materials or finishes.

Parameter Comparison

Parameter	75160-122-36 (Main)	0022303364 (Molex)	3-826646-6 (TE)	3-826926-6 (TE)	350-10-136-00-018101 (Preci-Dip)	BHS-136-G-A (Samtec)
Number of Positions	36	36	36	36	36	36
Pitch - Mating	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)
Number of Rows	1	1	1	1	1	1
Connector Type	Header	Header, Breakaway	Header, Breakaway	Header, Breakaway	Header	Header
Contact Type	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin
Mounting Type	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole
Termination	Solder	Solder	Solder	Solder	Solder	Solder
Shrouding	Unshrouded	Unshrouded	Unshrouded	Unshrouded	Unshrouded	Unshrouded
Contact Finish - Mating	Gold, GXT™	Tin	Gold	Tin	Gold	Gold
Current Rating	5A	—	5A	5A	3A	—
Operating Temperature	-65°C ~ 130°C	—	-65°C ~ 105°C	-65°C ~ 105°C	-55°C ~ 125°C	-55°C ~ 125°C
Product Status	Obsolete	Active	Active	Active	Active	Active
RoHS Status	RoHS non-compliant	ROHS3 Compliant	RoHS Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant

Engineering Selection Recommendations

For RoHS3 Compliant Designs: Select 0022303364 (Molex KK254 series), 3-826926-6 (TE AMPMODU Mod II), or 350-10-136-00-018101 (Preci-Dip 350 series). These parts carry active product status with ROHS3 compliance certification, supporting long-term design continuity and regulatory alignment.

For Gold-Plated Mating Contact Requirement: Choose 3-826646-6 (TE AMPMODU Mod II) or 350-10-136-00-018101 (Preci-Dip 350 series). Both maintain gold mating contact finish with RoHS compliance and active product status.

For Extended Temperature Range: The main part 75160-122-36 operates to 130°C. Substitute parts operate to 105°C or 125°C maximum. Verify application temperature requirements before selection.

For Current Rating Compatibility: The main part is rated 5A. Preci-Dip 350 and 351 series parts are rated 3A. Molex 0022303364 and Samtec BHS-136-G-A do not specify current ratings. Verify application current requirements.

Frequently Asked Questions (FAQ)

Q: Can 0022303364 (Molex) directly replace 75160-122-36?

A: Yes, for form, fit, and function. Both are 36-position, 0.100" pitch, single-row, through-hole headers with solder termination and unshrouded design. The Molex part carries ROHS3 compliance and active product status. Contact finish differs (tin vs. gold), which may affect signal integrity in high-frequency applications.

Q: What is the difference between 3-826646-6 and 3-826926-6 (both TE AMPMODU Mod II)?

A: Both are 36-position, 0.100" pitch TE headers with active status and RoHS compliance. Key differences: 3-826646-6 has gold mating contact finish (3.90µin thickness) and 5A current rating; 3-826926-6 has tin mating contact finish (78.7µin thickness) and 5A current rating. Contact length and post specifications also differ slightly. Select based on contact finish requirement and application environment.

Q: Are Preci-Dip 350 and 351 series parts suitable replacements?

A: Yes, for mechanical and electrical compatibility. Both series maintain 36-position, 0.100" pitch, single-row, through-hole configuration with solder termination. However, current rating is 3A (vs. 5A for main part) and operating temperature range is -55°C to 125°C (vs. -65°C to 130°C). Verify application requirements before selection.

Q: What is the significance of "Breakaway" connector type in Molex and TE parts?

A: Breakaway design allows individual positions to be separated from the main connector body. This feature does not affect compatibility with standard 36-position applications but provides additional flexibility for custom configurations.

Q: Does contact shape (square vs. circular) affect substitution?

A: Contact shape is determined by the connector series design. The main part uses square contacts; Preci-Dip 350 and 351 series use circular contacts. Both shapes are compatible with standard 0.100" pitch mating applications. Verify mating connector contact geometry for your specific application.

Q: Which substitute part has the best inventory availability?

A: 3-826926-6 (TE AMPMODU Mod II) has 2515 pieces in stock. 0022303364 (Molex) has 1263 pieces. Both offer strong availability for immediate procurement.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message