Equivalent & Substitute Parts for 75160-118-01LF

Part Overview

The 75160-118-01LF is a rectangular connector header manufactured by Amphenol ICC (FCI) in the BERGSTIK® series. This is a through-hole, single-position male pin header connector with vertical orientation and unshrouded design. The product is currently obsolete, making identification of functionally equivalent alternatives essential for ongoing system support, maintenance, and new production runs where legacy component replacement is required.

Substiute Parts

75160-118-01LF

Amphenol ICC (FCI)In Stock: 107575160-118-01LF Datasheet

Current PartRFQ

800-10-001-10-002000

Mill-Max Manufacturing Corp.In Stock: 2214800-10-001-10-002000 Datasheet

MFR RecommendedRFQ

HTS-101-G-A

Samtec Inc.In Stock: 789HTS-101-G-A Datasheet

MFR RecommendedRFQ

TS-101-T-A-2

Samtec Inc.In Stock: 960TS-101-T-A-2 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 75160-118-01LF is determined by the following core parameters:

• Connector Type & Contact Type: Must be Header with Male Pin configuration
• Position Count & Row Configuration: Must be 1 position, 1 row
• Mounting & Termination: Must be Through Hole with Solder termination
• Style & Shrouding: Must be Board to Board, Unshrouded
• Electrical Ratings: Current and voltage ratings must meet or exceed 5A and 110V respectively
• Environmental Compliance: RoHS compliance status and operating temperature range

The three substitute parts identified—800-10-001-10-002000 (Mill-Max), HTS-101-G-A (Samtec), and TS-101-T-A-2 (Samtec)—satisfy these core functional requirements. All three are active products with current manufacturing status, providing supply continuity for the obsolete 75160-118-01LF.

Parameter Comparison

Engineering Selection Recommendations

All three substitute parts are active products with current manufacturing support, providing supply security for the obsolete 75160-118-01LF. Selection among these alternatives depends on specific application requirements:

800-10-001-10-002000 (Mill-Max Manufacturing Corp.) is the manufacturer-recommended primary substitute. It maintains full functional equivalence with identical connector topology, board-to-board unshrouded configuration, and through-hole solder termination. The part carries ROHS3 compliance and unlimited moisture sensitivity rating (MSL 1). Contact geometry differs (circular vs. square), and contact finish thickness is reduced to 10.0µin, which remains within acceptable parameters for standard signal and power applications.

HTS-101-G-A (Samtec Inc.) is an active alternative with gold contact finish at 20.0µin thickness, providing enhanced corrosion resistance compared to the Mill-Max option. This part is designated as high-temperature capable within the HTS series. ROHS3 compliance and EAR99 export classification are maintained.

TS-101-T-A-2 (Samtec Inc.) offers tin contact finish with significantly higher thickness (200.0µin), suitable for applications requiring robust solder joint formation and extended contact life. This part specifies 0.100" (2.54mm) pitch and carries ROHS3 compliance. The tin finish provides alternative surface characteristics for specific soldering processes or environmental conditions.

All three parts satisfy core electrical and mechanical requirements. Selection should be based on contact finish preference, thermal performance requirements, and supply chain availability.

Frequently Asked Questions (FAQ)

Q: Can 800-10-001-10-002000 directly replace 75160-118-01LF in existing designs?

A: Yes. Both parts share identical functional specifications: single-position, male-pin header with through-hole solder termination, board-to-board unshrouded configuration. The primary difference is contact geometry (circular vs. square) and reduced gold plating thickness (10.0µin vs. 30.0µin). These differences do not affect electrical performance in standard applications.

Q: What is the difference between the Samtec HTS-101-G-A and TS-101-T-A-2 options?

A: The primary distinction is contact finish material and thickness. HTS-101-G-A uses gold finish at 20.0µin, while TS-101-T-A-2 uses tin finish at 200.0µin. Gold provides superior corrosion resistance; tin provides enhanced solder wetting and joint durability. Selection depends on soldering process requirements and environmental exposure conditions.

Q: Are all substitute parts RoHS compliant?

A: Yes. The original 75160-118-01LF is RoHS Compliant. All three substitute parts carry ROHS3 Compliant status, meeting current regulatory requirements for lead-free manufacturing and restricted substance limitations.

Q: What are the operating temperature ranges for substitute parts?

A: The original 75160-118-01LF specifies -65°C to 130°C operating range. The Mill-Max 800-10-001-10-002000 does not specify operating temperature limits in available documentation. The Samtec HTS-101-G-A is designated as high-temperature capable. The Samtec TS-101-T-A-2 does not specify operating temperature limits. For applications requiring the full -65°C to 130°C range, design validation is recommended.

Q: Do all parts carry the same electrical ratings?

A: The original 75160-118-01LF specifies 5A current rating and 110V voltage rating. The Mill-Max and Samtec parts do not provide explicit current and voltage ratings in available documentation. For applications requiring specific electrical performance verification, manufacturer datasheets should be consulted.

Q: What packaging options are available?

A: The original 75160-118-01LF packaging is not specified. All three substitute parts are available in Bulk packaging, suitable for production assembly and component procurement workflows.