Amphenol ICC 75160-106-36LF Equivalent & Substitute Parts

Part Overview

The Amphenol ICC 75160-106-36LF is a rectangular connector header for through-hole mounting with 36 positions at 0.100" (2.54mm) pitch. This BERGSTIK® series component features male pins with gold-plated contacts and is rated for 5A at 110V across an operating temperature range of -65°C to 130°C. The part is currently obsolete, making equivalent substitutes necessary for ongoing design support and procurement.

Key Parameters

Parameter	Value
Manufacturer Part Number	75160-106-36LF
Manufacturer	Amphenol ICC (FCI)
Series	BERGSTIK®
Product Status	Obsolete
Connector Type	Header
Contact Type	Male Pin
Number of Positions	36
Pitch - Mating	0.100" (2.54mm)
Number of Rows	1
Mounting Type	Through Hole
Termination	Solder
Contact Shape	Square
Contact Finish - Mating	Gold, GXT™
Contact Finish Thickness - Mating	30.0µin (0.76µm)
Contact Material	Phosphor Bronze
Insulation Material	Thermoplastic
Operating Temperature	-65°C ~ 130°C
Current Rating	5A
Voltage Rating	110V
Material Flammability Rating	UL94 V-0
RoHS Status	RoHS Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution eligibility is determined by the following critical parameters:

Connector Type & Contact Type: Must be Header with Male Pin configuration
Number of Positions & Pitch: Must maintain 36 positions at 0.100" (2.54mm) pitch
Mounting Style: Through Hole, Board to Board
Termination Method: Solder capability required
Electrical Ratings: Current and voltage ratings must meet or exceed 5A at 110V
Environmental Compliance: RoHS and REACH status for regulatory alignment
Operating Temperature Range: Must support -65°C to 130°C or equivalent industrial range
Contact Finish & Material: Gold or tin finish acceptable; brass or phosphor bronze materials compatible

The substitute parts listed below meet these core substitution criteria. Variations in contact geometry (circular vs. square), contact length, insulation height, and specific contact finish thickness represent acceptable design variations within the rectangular connector category for 36-position 2.54mm pitch headers.

Parameter Comparison

Parameter	75160-106-36LF (Main)	350-10-136-00-006101	350-10-136-00-013101	350-10-136-01-666101	350-80-136-00-006101	350-80-136-00-013101	350-80-136-01-666101	350-V3-136-00-006101	800-10-036-10-002000	HTS-136-G-A	HTS-136-G-A-1
Manufacturer	Amphenol ICC	Preci-Dip	Preci-Dip	Preci-Dip	Preci-Dip	Preci-Dip	Preci-Dip	Preci-Dip	Mill-Max	Samtec	Samtec
Product Status	Obsolete	Active	Active	Active	Active	Active	Active	Active	Active	Active	Active
Connector Type	Header	Header	Header	Header	Header	Header	Header	Header	Header	Header	Header
Contact Type	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin
Number of Positions	36	36	36	36	36	36	36	36	36	36	36
Pitch - Mating	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)
Number of Rows	1	1	1	1	1	1	1	1	1	1	1
Mounting Type	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole
Termination	Solder	Solder	Solder	Press-Fit, Solder	Solder	Solder	Press-Fit, Solder	Solder	Solder	Solder	Solder
Contact Shape	Square	Circular	Circular	Circular	Circular	Circular	Circular	Circular	Circular	Circular	Circular
Contact Finish - Mating	Gold, GXT™	Gold	Gold	Gold	Tin	Tin	Tin	Gold	Gold	Gold	Gold
Contact Material	Phosphor Bronze	Brass	Brass	Brass	Brass	Brass	Brass	Brass	Brass Alloy	Not specified	Not specified
Insulation Material	Thermoplastic	PCT, Polyester, Glass Filled	PCT, Polyester, Glass Filled	PCT, Polyester, Glass Filled	PCT, Polyester, Glass Filled	PCT, Polyester, Glass Filled	PCT, Polyester, Glass Filled	PCT, Polyester, Glass Filled	PCT	Not specified	Not specified
Operating Temperature	-65°C ~ 130°C	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 125°C	Not specified	Not specified	Not specified
Current Rating	5A	3A	3A	3A	3A	3A	3A	3A	Not specified	Not specified	Not specified
Voltage Rating	110V	150VDC	150VDC	150VDC	150VDC	150VDC	150VDC	150VDC	Not specified	Not specified	Not specified
Material Flammability Rating	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	Not specified	Not specified	Not specified
RoHS Status	RoHS Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	Not specified	Not specified

Engineering Selection Recommendations

All listed substitute parts are active products with current manufacturing support, addressing the obsolescence of the original 75160-106-36LF. Selection should prioritize the following factors:

Preci-Dip 350 Series (350-10-136-00-006101, 350-10-136-00-013101, 350-10-136-01-666101, 350-80-136-00-006101, 350-80-136-00-013101, 350-80-136-01-666101, 350-V3-136-00-006101): These parts maintain full ROHS3 compliance and UL94 V-0 flammability rating. The 350-10 and 350-80 variants differ in contact finish (gold vs. tin) and contact length specifications. The 350-V3 variant provides mixed finish (gold mating, tin post). All support -55°C to 125°C operation and 150VDC rating, exceeding the original voltage specification. Current rating of 3A is lower than the original 5A; applications requiring higher current should be evaluated against actual circuit requirements.

Mill-Max 800-10-036-10-002000: Offers ROHS3 compliance with gold-plated contacts and brass alloy material. Operating temperature and current/voltage ratings are not specified; datasheet verification is required for applications with defined thermal or electrical constraints.

Samtec HTS-136-G-A and HTS-136-G-A-1: Both variants provide active product status with ROHS3 compliance and gold contact finish. Detailed electrical and thermal specifications are not provided in the available data; these parts are suitable for applications where complete specification data can be obtained from the manufacturer.

Frequently Asked Questions (FAQ)

Q: Can I use a substitute part with a lower current rating (3A vs. 5A)?

A: The substitute parts from Preci-Dip and Mill-Max are rated for 3A, compared to the original 5A rating. Substitution is valid only if your circuit design operates at or below 3A per contact. Review your actual current requirements before selection.

Q: What is the difference between the Preci-Dip 350-10, 350-80, and 350-V3 variants?

A: The primary differences are contact finish and post material. The 350-10 and 350-V3 variants feature gold mating surfaces; the 350-80 variant uses tin finish. The 350-V3 provides mixed finish (gold mating, tin post). Contact length and insulation height vary slightly between variants. All maintain the same 36-position, 2.54mm pitch configuration and are electrically equivalent for board-to-board connectivity.

Q: Are the circular contact shapes of substitute parts compatible with the square contacts of the original?

A: Yes. Both square and circular contact geometries are standard in rectangular connector design for 2.54mm pitch headers. Compatibility is determined by pitch, position count, and mating interface, not contact cross-section. The substitute parts maintain full mechanical and electrical compatibility.

Q: What is the difference between solder and press-fit termination options?

A: Solder termination requires wave or reflow soldering to the PCB. Press-fit termination (available on 350-10-136-01-666101 and 350-80-136-01-666101) allows mechanical insertion into plated through-holes without soldering. Both methods are valid; selection depends on your PCB assembly process and design requirements.

Q: Do all substitute parts meet RoHS compliance?

A: Yes. All listed substitute parts carry ROHS3 compliance status, meeting current regulatory requirements for lead-free and restricted substance compliance. The original part is RoHS Compliant; substitutes maintain or exceed this standard.

Q: What is the operating temperature range difference between the original and substitutes?

A: The original 75160-106-36LF operates from -65°C to 130°C. Most Preci-Dip substitutes operate from -55°C to 125°C, a narrower range. If your application requires the full -65°C lower limit, verify substitute part datasheets or contact the manufacturer for extended temperature variants.

Q: Are there packaging differences between substitute parts?

A: Yes. Preci-Dip parts are supplied in bulk packaging; Samtec HTS variants are supplied in tube packaging. Mill-Max is supplied in bulk. Packaging affects handling, storage, and reel compatibility for automated assembly. Confirm packaging requirements with your procurement and assembly processes.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message