Request Quote
(Ships tomorrow)
Amphenol ICC 75160-102-36 Equivalent & Substitute Parts
Part Overview
The Amphenol ICC 75160-102-36 is a rectangular connector header with 36 vertical positions at 0.100" (2.54mm) pitch, designed for through-hole board-to-board applications. This BERGSTIK® series component features unshrouded male pins with gold-plated phosphor bronze contacts and solder termination. The part is classified as obsolete, making equivalent substitutes necessary for new designs and ongoing production support.
Substiute Parts
Key Parameters
| Parameter | Value |
|---|---|
| Manufacturer Part Number | 75160-102-36 |
| Manufacturer | Amphenol ICC (FCI) |
| Connector Type | Header |
| Contact Type | Male Pin |
| Number of Positions | 36 |
| Pitch - Mating | 0.100" (2.54mm) |
| Number of Rows | 1 |
| Mounting Type | Through Hole |
| Termination | Solder |
| Style | Board to Board |
| Shrouding | Unshrouded |
| Contact Finish - Mating | Gold, GXT™ |
| Contact Material | Phosphor Bronze |
| Insulation Material | Thermoplastic |
| Operating Temperature | -65°C ~ 130°C |
| Current Rating | 5A |
| Voltage Rating | 110V |
| Product Status | Obsolete |
| RoHS Status | RoHS non-compliant |
Substitute Part Grouping Explanation
Substitution for the 75160-102-36 is determined by the following critical parameters:
- Connector Type & Style: Header, board-to-board configuration
- Contact Configuration: Male pin, 36 positions, single row
- Pitch: 0.100" (2.54mm) mating pitch
- Mounting: Through-hole solder termination
- Shrouding: Unshrouded design
- Electrical Performance: Current and voltage ratings must meet or exceed 5A and 110V
Substitute parts are grouped into two categories:
Category A - Direct Functional Equivalents (Preci-Dip 350 Series & Mill-Max 800 Series): These parts maintain identical position count, pitch, row configuration, and board-to-board style. They feature circular contact geometry and brass material with gold or tin finishes. Operating temperature range (-55°C ~ 125°C) is narrower than the original but suitable for most applications. Current rating is 3A, which is lower than the original 5A specification.
Category B - Alternative Configuration (Amphenol ICC 75869-106LF): This part differs in position count (34 vs. 36) and row configuration (2 rows vs. 1 row), making it suitable only for applications where the connector footprint can be redesigned.
Parameter Comparison
| Parameter | 75160-102-36 (Original) | 350-10-136-00-006101 | 350-10-136-00-013101 | 350-10-136-01-666101 | 350-80-136-00-006101 | 350-80-136-00-013101 | 350-80-136-01-666101 | 350-V3-136-00-006101 | 800-10-036-10-002000 | HTS-136-G-A |
|---|---|---|---|---|---|---|---|---|---|---|
| Manufacturer | Amphenol ICC | Preci-Dip | Preci-Dip | Preci-Dip | Preci-Dip | Preci-Dip | Preci-Dip | Preci-Dip | Mill-Max | Samtec |
| Number of Positions | 36 | 36 | 36 | 36 | 36 | 36 | 36 | 36 | 36 | 36 |
| Pitch - Mating | 0.100" (2.54mm) | 0.100" (2.54mm) | 0.100" (2.54mm) | 0.100" (2.54mm) | 0.100" (2.54mm) | 0.100" (2.54mm) | 0.100" (2.54mm) | 0.100" (2.54mm) | 0.100" (2.54mm) | 0.100" (2.54mm) |
| Number of Rows | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 |
| Contact Type | Male Pin | Male Pin | Male Pin | Male Pin | Male Pin | Male Pin | Male Pin | Male Pin | Male Pin | Male Pin |
| Mounting Type | Through Hole | Through Hole | Through Hole | Through Hole | Through Hole | Through Hole | Through Hole | Through Hole | Through Hole | Through Hole |
| Termination | Solder | Solder | Solder | Press-Fit, Solder | Solder | Solder | Press-Fit, Solder | Solder | Solder | Solder |
| Style | Board to Board | Board to Board | Board to Board | Board to Board | Board to Board | Board to Board | Board to Board | Board to Board | Board to Board | Board to Board |
| Shrouding | Unshrouded | Unshrouded | Unshrouded | Unshrouded | Unshrouded | Unshrouded | Unshrouded | Unshrouded | Unshrouded | Unshrouded |
| Contact Material | Phosphor Bronze | Brass | Brass | Brass | Brass | Brass | Brass | Brass | Brass Alloy | Not specified |
| Contact Finish - Mating | Gold, GXT™ | Gold | Gold | Gold | Tin | Tin | Tin | Gold | Gold | Gold |
| Operating Temperature | -65°C ~ 130°C | -55°C ~ 125°C | -55°C ~ 125°C | -55°C ~ 125°C | -55°C ~ 125°C | -55°C ~ 125°C | -55°C ~ 125°C | -55°C ~ 125°C | Not specified | Not specified |
| Current Rating | 5A | 3A | 3A | 3A | 3A | 3A | 3A | 3A | Not specified | Not specified |
| Voltage Rating | 110V | 150VDC | 150VDC | 150VDC | 150VDC | 150VDC | 150VDC | 150VDC | Not specified | Not specified |
| RoHS Status | RoHS non-compliant | ROHS3 Compliant | ROHS3 Compliant | ROHS3 Compliant | ROHS3 Compliant | ROHS3 Compliant | ROHS3 Compliant | ROHS3 Compliant | ROHS3 Compliant | ROHS3 Compliant |
| Product Status | Obsolete | Active | Active | Active | Active | Active | Active | Active | Active | Active |
Engineering Selection Recommendations
Primary Substitutes (Preci-Dip 350 Series)
The Preci-Dip 350 series parts (350-10-136-00-006101, 350-10-136-00-013101, 350-10-136-01-666101, 350-80-136-00-006101, 350-80-136-00-013101, 350-80-136-01-666101, 350-V3-136-00-006101) are active products with ROHS3 compliance. These parts maintain identical position count, pitch, row configuration, and board-to-board style as the original. Selection among these variants depends on contact finish preference (gold vs. tin) and termination method (solder only vs. press-fit/solder combination).
Secondary Substitute (Mill-Max 800-10-036-10-002000)
The Mill-Max 800 series part is an active product with ROHS3 compliance and maintains full mechanical and electrical compatibility with the original connector footprint. Operating temperature and current/voltage ratings are not specified in the provided data.
Tertiary Substitute (Samtec HTS-136-G-A)
The Samtec HTS-136-G-A is an active product with ROHS3 compliance. This part maintains the 36-position, single-row, 0.100" pitch configuration. Operating temperature and electrical ratings are not specified in the provided data.
Alternative Configuration (Amphenol ICC 75869-106LF)
The 75869-106LF differs significantly in physical configuration (34 positions, 2 rows, shrouded design) and is suitable only for applications where PCB layout can be redesigned. This part is active and ROHS3 compliant.
Frequently Asked Questions (FAQ)
Q: Can I use a Preci-Dip 350 series part as a direct replacement for the 75160-102-36?
A: Yes, for mechanical and electrical compatibility. The Preci-Dip 350 series maintains the same 36-position, single-row, 0.100" pitch configuration and board-to-board style. However, the current rating is 3A versus the original 5A, and the operating temperature range is -55°C to 125°C versus -65°C to 130°C. Verify that your application requirements fall within these parameters.
Q: What is the difference between the gold-plated and tin-plated Preci-Dip variants?
A: The 350-10 and 350-V3 series feature gold mating contact finish, while the 350-80 series features tin mating contact finish. Contact finish selection depends on application requirements for corrosion resistance and contact reliability. Gold finishes typically provide superior long-term reliability in low-current signal applications.
Q: Can I use the Amphenol ICC 75869-106LF as a substitute?
A: The 75869-106LF is not a direct replacement. It features 34 positions arranged in 2 rows with shrouding, compared to the original 36 positions in a single unshrouded row. This part requires PCB redesign and is suitable only for new designs where the connector footprint can be modified.
Q: What are the key differences between the Preci-Dip variants with different base product numbers (350-10, 350-80, 350-V3)?
A: The primary differences are contact finish and material composition. The 350-10 series uses gold finish on both mating and post contacts. The 350-80 series uses tin finish on both mating and post contacts. The 350-V3 series uses gold finish on mating contacts and tin finish on post contacts. All maintain identical mechanical dimensions and electrical ratings.
Q: Does the press-fit/solder termination option (350-10-136-01-666101, 350-80-136-01-666101) offer advantages?
A: Press-fit termination provides mechanical retention during assembly, which can improve manufacturing reliability. However, this requires compatible PCB pad design. Verify PCB specifications before selecting press-fit variants.
Q: Are all substitute parts RoHS compliant?
A: All substitute parts listed are ROHS3 compliant. The original 75160-102-36 is RoHS non-compliant. If RoHS compliance is required for your application, any of the listed substitutes will satisfy this requirement.
Q: What is the inventory status for these substitute parts?
A: All substitute parts are listed as active products with new original stock available. Preci-Dip 350 series inventory ranges from 842 to 1057 pieces. Mill-Max 800 series has 1058 pieces. Samtec HTS-136-G-A has 775 pieces. Amphenol ICC 75869-106LF has 3059 pieces.
Alternative Parts
SJ6012L2TP
Littelfuse Inc.
6 Alternative Parts
JMK107BBJ476MA-RE
Taiyo Yuden
10 Alternative Parts
GMK107BBJ475MA-T
Taiyo Yuden
5 Alternative Parts
SJ6020N2ARP
Littelfuse Inc.
3 Alternative Parts
SJ6025R2ATP
Littelfuse Inc.
4 Alternative Parts
2474-05L
API Delevan Inc.
1 Alternative Parts
4590R-684K
API Delevan Inc.
1 Alternative Parts
CM6560R-334
API Delevan Inc.
1 Alternative Parts
CM6460-104
API Delevan Inc.
1 Alternative Parts
5526-12
API Delevan Inc.
1 Alternative Parts