74VHCT541ASJ Equivalent & Substitute Parts

Part Overview

The 74VHCT541ASJ is a non-inverting buffer logic IC manufactured by onsemi, featuring 1 element with 8 bits per element and 3-state output capability. Designed for 4.5V to 5.5V supply operation, this component is classified as obsolete. Due to its obsolete status and limited availability from the original manufacturer, identifying equivalent and substitute parts from active product lines is essential for design continuity and procurement reliability.

Key Parameters

Parameter	Value
Manufacturer Part Number	74VHCT541ASJ
Manufacturer	onsemi
Logic Type	Buffer, Non-Inverting
Number of Elements	1
Number of Bits per Element	8
Output Type	3-State
Current - Output High, Low	8mA, 8mA
Voltage - Supply	4.5V ~ 5.5V
Operating Temperature	-40°C ~ 85°C (TA)
Package / Case	20-SOIC (0.209", 5.30mm Width)
Mounting Type	Surface Mount
Product Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)

Substitute Part Grouping Explanation

Substitute parts for the 74VHCT541ASJ are classified based on the following critical parameters that determine functional and mechanical compatibility:

Core Electrical Parameters:

Logic Type: Buffer, Non-Inverting
Number of Elements: 1
Number of Bits per Element: 8
Output Type: 3-State
Voltage - Supply: 4.5V ~ 5.5V

Mechanical Parameters:

Package / Case: 20-SOIC (0.209", 5.30mm Width)
Mounting Type: Surface Mount

Performance Parameters:

Current - Output High, Low: 8mA, 8mA (primary specification)
Operating Temperature Range: -40°C ~ 85°C minimum

Substitute parts are grouped into two categories:

Direct Substitutes: Parts meeting all electrical and mechanical specifications with identical output current ratings (8mA, 8mA) and matching package dimensions.

Compatible Substitutes: Parts meeting core electrical specifications and package requirements but with enhanced performance characteristics (higher output current or extended temperature range), which provide functional equivalence with improved operational margins.

Parameter Comparison

Parameter	74VHCT541ASJ (Main)	SN74LV541ATNSR	SN74AHCT541DW	SN74AHCT541DWR	SN74AHCT541IDWREP	SN74AHCT541NSR
Manufacturer	onsemi	Texas Instruments	Texas Instruments	Texas Instruments	Texas Instruments	Texas Instruments
Series	74VHCT	74LV	74AHCT	74AHCT	74AHCT	74AHCT
Logic Type	Buffer, Non-Inverting	Buffer, Non-Inverting	Buffer, Non-Inverting	Buffer, Non-Inverting	Buffer, Non-Inverting	Buffer, Non-Inverting
Number of Elements	1	1	1	1	1	1
Number of Bits per Element	8	8	8	8	8	8
Output Type	3-State	3-State	3-State	3-State	3-State	3-State
Current - Output High, Low	8mA, 8mA	16mA, 16mA	8mA, 8mA	8mA, 8mA	8mA, 8mA	8mA, 8mA
Voltage - Supply	4.5V ~ 5.5V	4.5V ~ 5.5V	4.5V ~ 5.5V	4.5V ~ 5.5V	4.5V ~ 5.5V	4.5V ~ 5.5V
Operating Temperature	-40°C ~ 85°C	-40°C ~ 125°C	-40°C ~ 125°C	-40°C ~ 125°C	-40°C ~ 85°C	-40°C ~ 125°C
Package / Case	20-SOIC (0.209", 5.30mm)	20-SOIC (0.209", 5.30mm)	20-SOIC (0.295", 7.50mm)	20-SOIC (0.295", 7.50mm)	20-SOIC (0.295", 7.50mm)	20-SOIC (0.209", 5.30mm)
Mounting Type	Surface Mount	Surface Mount	Surface Mount	Surface Mount	Surface Mount	Surface Mount
Product Status	Obsolete	Active	Discontinued at DiGi Electronics	Active	Active	Active
RoHS Status	Not specified	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)

Engineering Selection Recommendations

SN74LV541ATNSR (Texas Instruments): This part is the primary direct substitute. It maintains identical electrical specifications (8mA output current, 4.5V to 5.5V supply) and matching package dimensions (20-SOIC 0.209" width). The extended operating temperature range (-40°C to 125°C) provides enhanced thermal margin. Product status is active with ROHS3 compliance, ensuring long-term availability and regulatory alignment.

SN74AHCT541DWR (Texas Instruments): This part is functionally equivalent with active product status and ROHS3 compliance. Output current specifications match the main part (8mA, 8mA). The extended operating temperature range (-40°C to 125°C) offers improved thermal performance. Package dimensions differ (0.295" width versus 0.209"), requiring PCB layout verification before implementation.

SN74AHCT541IDWREP (Texas Instruments): This part provides functional equivalence with active product status and ROHS3 compliance. Output current and supply voltage specifications are identical to the main part. Operating temperature range matches the original specification (-40°C to 85°C). Package dimensions differ (0.295" width), requiring PCB layout assessment.

SN74AHCT541NSR (Texas Instruments): This part is compatible with matching package dimensions (20-SOIC 0.209" width) and identical output current specifications (8mA, 8mA). Extended operating temperature range (-40°C to 125°C) and active product status with ROHS3 compliance support long-term design continuity.

SN74AHCT541DW (Texas Instruments): This part meets electrical specifications with 8mA output current and matching supply voltage. Product status is discontinued at DiGi Electronics, limiting procurement reliability. Package dimensions differ (0.295" width). Use only when other active alternatives are unavailable.

Frequently Asked Questions (FAQ)

Q: Can SN74LV541ATNSR directly replace 74VHCT541ASJ without PCB modifications?

A: Yes. SN74LV541ATNSR maintains identical package dimensions (20-SOIC 0.209" width), electrical specifications (8mA output current, 4.5V to 5.5V supply), and functional characteristics. No PCB layout changes are required.

Q: What is the impact of the package dimension difference in SN74AHCT541DWR and SN74AHCT541IDWREP?

A: These parts use 20-SOIC with 0.295" width versus the original 0.209" width. The footprint is larger, requiring PCB layout verification. Pin pitch and electrical connections remain compatible, but physical placement on the board must be confirmed.

Q: Why do some substitutes have higher output current (16mA) than the original (8mA)?

A: SN74LV541ATNSR provides 16mA output current, which exceeds the original specification. This enhanced capability is backward compatible and provides additional drive capability for downstream logic circuits without functional impact.

Q: Are all substitute parts ROHS3 compliant?

A: All Texas Instruments substitutes listed are ROHS3 compliant. The original 74VHCT541ASJ RoHS status is not specified in available documentation.

Q: Which substitute offers the best long-term availability?

A: SN74LV541ATNSR, SN74AHCT541DWR, SN74AHCT541IDWREP, and SN74AHCT541NSR all have active product status from Texas Instruments, ensuring sustained availability. SN74AHCT541DW is discontinued at DiGi Electronics and should be avoided for new designs.

Q: Can I use a substitute with an extended temperature range in place of the original?

A: Yes. Parts with extended operating temperature ranges (-40°C to 125°C) are fully compatible with applications requiring the original range (-40°C to 85°C). The extended range provides additional operational margin without functional compromise.

Q: What is the difference between packaging types (Tape & Reel, Cut Tape, Tube)?

A: Packaging types affect procurement and handling but do not impact electrical or mechanical compatibility. Tape & Reel and Cut Tape & Digi-Reel are suitable for automated assembly. Tube packaging is used for manual handling. Select based on manufacturing process requirements.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message