74LVC2G07GF,132 Equivalent & Substitute Parts

Part Overview

The 74LVC2G07GF,132 is a non-inverting buffer IC manufactured by Nexperia USA Inc., featuring 2 elements with 1 bit per element and open drain output configuration. This device operates across a supply voltage range of 1.65V to 5.5V with an output current capability of 32mA (low). The part is housed in a 6-XSON, SOT891 (1x1) surface mount package and is classified as obsolete. Due to its obsolete status, identifying active equivalent and substitute parts is essential for ongoing design support and procurement continuity.

Key Parameters

Parameter	Value
Logic Type	Buffer, Non-Inverting
Number of Elements	2
Number of Bits per Element	1
Output Type	Open Drain
Current - Output High, Low	-, 32mA
Voltage - Supply	1.65V ~ 5.5V
Operating Temperature	-40°C ~ 125°C (TA)
Mounting Type	Surface Mount
Package / Case	6-XFDFN
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Product Status	Obsolete

Substitute Part Grouping Explanation

Substitution for the 74LVC2G07GF,132 is determined by the following critical parameters:

Primary Substitution Criteria:

Logic Type: Buffer, Non-Inverting
Number of Elements: 2
Number of Bits per Element: 1
Output Type: Open Drain
Current - Output High, Low: -, 32mA
Voltage - Supply: 1.65V ~ 5.5V
Operating Temperature: -40°C ~ 125°C (TA)
Package / Case: 6-XFDFN
RoHS Status: ROHS3 Compliant
Moisture Sensitivity Level (MSL): 1 (Unlimited)

Substitute Categories:

Category A: Direct Functional Equivalents (2-Element Buffers) Parts maintaining identical element count and electrical specifications with active product status:

74LVC2G07GM,115
74LVC2G07GM,132
74LVC2G07GN,132
74LVC2G07GS,132

Category B: Single-Element Alternatives (1-Element Buffers) Parts with reduced element count but identical electrical characteristics per element. Suitable when circuit design permits use of single-element configuration:

74LVC1G07GM,115
74LVC1G07GM,132
74LVC1G07GN,132
74LVC1G07GS,132
74LVC1G07GS-Q100H (automotive qualified)
74LVC1G07GX4Z (4-pin package variant)

Parameter Comparison

Part Number	Manufacturer	Elements	Output Type	Current (mA)	Supply Voltage	Temp Range	Package	Status	Packaging Type
74LVC2G07GF,132	Nexperia USA Inc.	2	Open Drain	32	1.65V ~ 5.5V	-40°C ~ 125°C	6-XFDFN	Obsolete	Cut Tape (CT)
74LVC2G07GM,115	Nexperia USA Inc.	2	Open Drain	32	1.65V ~ 5.5V	-40°C ~ 125°C	6-XFDFN	Active	Tape & Reel (TR)
74LVC2G07GM,132	Nexperia USA Inc.	2	Open Drain	32	1.65V ~ 5.5V	-40°C ~ 125°C	6-XFDFN	Active	Tape & Reel (TR)
74LVC2G07GN,132	NXP Semiconductors	2	Open Drain	32	1.65V ~ 5.5V	-40°C ~ 125°C	6-XFDFN	Active	Bulk
74LVC2G07GS,132	Nexperia USA Inc.	2	Open Drain	32	1.65V ~ 5.5V	-40°C ~ 125°C	6-XFDFN	Active	Tape & Reel (TR)
74LVC1G07GM,115	Nexperia USA Inc.	1	Open Drain	32	1.65V ~ 5.5V	-40°C ~ 125°C	6-XFDFN	Active	Tape & Reel (TR)
74LVC1G07GM,132	Nexperia USA Inc.	1	Open Drain	32	1.65V ~ 5.5V	-40°C ~ 125°C	6-XFDFN	Active	Tape & Reel (TR)
74LVC1G07GN,132	Nexperia USA Inc.	1	Open Drain	32	1.65V ~ 5.5V	-40°C ~ 125°C	6-XFDFN	Active	Tape & Reel (TR)
74LVC1G07GS,132	NXP Semiconductors	1	Open Drain	32	1.65V ~ 5.5V	-40°C ~ 125°C	6-XFDFN	Active	Bulk
74LVC1G07GS-Q100H	Nexperia USA Inc.	1	Open Drain	32	1.65V ~ 5.5V	-40°C ~ 125°C	6-XFDFN	Active	Tape & Reel (TR)
74LVC1G07GX4Z	Nexperia USA Inc.	1	Open Drain	32	1.65V ~ 5.5V	-40°C ~ 125°C	4-XFDFN	Active	Tape & Reel (TR)

Engineering Selection Recommendations

For Direct Replacement (2-Element Configuration):

Select 74LVC2G07GM,115 or 74LVC2G07GM,132 as primary alternatives. Both parts maintain active product status with Nexperia USA Inc. manufacturing, identical electrical specifications, and ROHS3 compliance. The difference between these variants is packaging designation only. 74LVC2G07GN,132 (NXP Semiconductors) and 74LVC2G07GS,132 (Nexperia USA Inc.) are additional active options with equivalent electrical performance.

For Single-Element Applications:

When circuit topology permits single-element buffer operation, 74LVC1G07GM,132 or 74LVC1G07GN,132 provide active alternatives with identical per-element electrical characteristics. 74LVC1G07GS-Q100H includes automotive-grade qualification (AEC-Q100) for applications requiring automotive compliance.

Packaging Considerations:

All 2-element and most 1-element substitutes maintain the 6-XFDFN package footprint. 74LVC1G07GX4Z uses a 4-XFDFN package (4-pin configuration) and is suitable only when PCB layout accommodates the smaller footprint.

Compliance Status:

All recommended substitutes maintain ROHS3 compliance and MSL Level 1 (Unlimited) moisture sensitivity rating, matching the original part's environmental specifications.

Frequently Asked Questions (FAQ)

Q: Can I use a 1-element buffer (74LVC1G07) to replace the 2-element 74LVC2G07GF,132?

A: Yes, if your circuit design requires only one buffer element. The 74LVC1G07 series provides identical electrical performance per element. However, you must verify that your PCB layout and schematic accommodate the reduced element count. If both buffer elements are required, use a 2-element substitute from the 74LVC2G07 series.

Q: What is the difference between 74LVC2G07GM,115 and 74LVC2G07GM,132?

A: Both parts are electrically identical with the same electrical specifications, supply voltage range, output current, and operating temperature. The difference is in the packaging designation code (115 vs. 132), which may reflect different manufacturing batches or tape reel configurations. Consult the manufacturer datasheet for specific packaging details.

Q: Is 74LVC1G07GS-Q100H suitable for automotive applications?

A: Yes. The 74LVC1G07GS-Q100H carries AEC-Q100 automotive qualification and is suitable for automotive-grade designs. However, this is a 1-element device. If your design requires 2 elements, verify whether automotive-qualified 2-element alternatives are available through the manufacturer.

Q: Can I use 74LVC1G07GX4Z as a direct replacement?

A: 74LVC1G07GX4Z is electrically equivalent but uses a 4-XFDFN package instead of the standard 6-XFDFN. This smaller package is suitable only if your PCB layout supports the 4-pin footprint. Verify pinout compatibility and PCB trace routing before selection.

Q: Why is the original 74LVC2G07GF,132 marked as obsolete?

A: The part has reached end-of-life status. Active alternatives with identical electrical specifications are available from Nexperia and NXP Semiconductors. Transition to an active part number to ensure long-term supply chain availability and continued manufacturer support.

Q: Are all substitute parts ROHS3 compliant?

A: All recommended substitutes maintain ROHS3 compliance matching the original part. Verify specific compliance documentation with your supplier for regulatory documentation requirements.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message