74LVC240APW/AUJ Equivalent & Substitute Parts

Part Overview

The 74LVC240APW/AUJ is an inverting buffer logic IC manufactured by NXP USA Inc., designed for 3.6V operation in surface mount applications. This device features 2 elements with 4 bits per element and 3-state output capability, making it suitable for bus interface and signal buffering applications. The part is currently in active production status with 754 units available in new original inventory. Substitute parts are identified when they maintain identical electrical and mechanical specifications while offering alternative packaging, supplier configurations, or improved availability.

Substiute Parts

74LVC240APW/AUJ
NXP USA Inc.In Stock: 86374LVC240APW/AUJ Datasheet
74LVC240APW/AUJ
Current Part
74LVC240APW,118
NXP SemiconductorsIn Stock: 4294474LVC240APW,118 Datasheet
74LVC240APW,118
Parametric Equivalent

Key Parameters

Parameter Specification
Manufacturer Part Number 74LVC240APW/AUJ
Manufacturer NXP USA Inc.
Series 74LVC
Logic Type Buffer, Inverting
Number of Elements 2
Number of Bits per Element 4
Output Type 3-State
Current - Output High, Low 24mA, 24mA
Voltage - Supply 1.2V ~ 3.6V
Operating Temperature -40°C ~ 125°C (TA)
Package / Case 20-TSSOP (0.173", 4.40mm Width)
Mounting Type Surface Mount
RoHS Status ROHS3 Compliant
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Product Status Active

Substitute Part Grouping Explanation

Substitute parts for the 74LVC240APW/AUJ are identified based on strict parametric equivalence across the following critical criteria:

  • Logic function: Buffer, Inverting configuration with identical element and bit-per-element count
  • Electrical performance: Matching output current ratings (24mA high/low), supply voltage range (1.2V ~ 3.6V), and operating temperature range (-40°C ~ 125°C)
  • Package specification: 20-TSSOP form factor with identical physical dimensions (0.173", 4.40mm width)
  • Mounting technology: Surface mount compatibility
  • Compliance: ROHS3 compliance and MSL rating of 1

Substitutes may differ in packaging configuration (bulk vs. tape/reel), supplier designation, or inventory source while maintaining full electrical and mechanical interchangeability.

Parameter Comparison

Parameter 74LVC240APW/AUJ 74LVC240APW,118
Manufacturer NXP USA Inc. NXP Semiconductors
Series 74LVC 74LVC
Logic Type Buffer, Inverting Buffer, Inverting
Number of Elements 2 2
Number of Bits per Element 4 4
Output Type 3-State 3-State
Current - Output High, Low 24mA, 24mA 24mA, 24mA
Voltage - Supply 1.2V ~ 3.6V 1.2V ~ 3.6V
Operating Temperature -40°C ~ 125°C (TA) -40°C ~ 125°C (TA)
Package / Case 20-TSSOP (0.173", 4.40mm Width) 20-TSSOP (0.173", 4.40mm Width)
Mounting Type Surface Mount Surface Mount
Moisture Sensitivity Level (MSL) 1 (Unlimited) 1 (Unlimited)
Product Status Active Active
Packaging Configuration Tape/Reel Bulk
Inventory Available 754 Pcs 42885 Pcs

Engineering Selection Recommendations

Both the 74LVC240APW/AUJ and 74LVC240APW,118 are active production parts from NXP with full ROHS3 compliance and identical electrical specifications. Selection between these parts should be based on:

  • Packaging requirement: The 74LVC240APW/AUJ is supplied in tape/reel configuration, while the 74LVC240APW,118 is supplied in bulk packaging
  • Inventory availability: The 74LVC240APW,118 offers significantly higher stock levels (42885 units vs. 754 units)
  • Supply chain considerations: Both parts maintain the same MSL rating of 1 (unlimited moisture sensitivity level), eliminating storage and handling differentiation

For applications requiring immediate availability or high-volume procurement, the 74LVC240APW,118 provides superior inventory access without electrical or mechanical compromise.

Frequently Asked Questions (FAQ)

Q: Are the 74LVC240APW/AUJ and 74LVC240APW,118 pin-for-pin compatible?

A: Yes. Both parts use the identical 20-TSSOP package with matching pinout, electrical characteristics, and functional behavior. They are direct substitutes at the circuit board level.

Q: What is the difference between tape/reel and bulk packaging?

A: Tape/reel packaging (74LVC240APW/AUJ) is configured for automated pick-and-place assembly equipment, while bulk packaging (74LVC240APW,118) is supplied in loose component form. The electrical and mechanical specifications are identical; packaging choice depends on assembly process requirements.

Q: Can I use the 74LVC240APW,118 in place of the 74LVC240APW/AUJ in my design?

A: Yes, provided your assembly process can accommodate bulk packaging. The parts are electrically and mechanically equivalent with no design modifications required.

Q: Are both parts RoHS compliant?

A: Yes. Both the 74LVC240APW/AUJ and 74LVC240APW,118 are ROHS3 compliant and suitable for applications requiring lead-free component specifications.

Q: What is the MSL rating, and does it differ between these parts?

A: Both parts carry an MSL rating of 1 (unlimited), indicating no moisture sensitivity restrictions. Standard handling and storage practices apply equally to both variants.

Q: What supply voltage range do these parts support?

A: Both parts operate across a supply voltage range of 1.2V to 3.6V, making them suitable for low-voltage logic applications and mixed-signal systems.

Request Quote (Ships tomorrow)