74LVC1G97GS,132 Equivalent & Substitute Parts

Part Overview

The 74LVC1G97GS,132 is a configurable multiple function logic gate IC manufactured by Nexperia USA Inc. in a 6-XSON surface mount package. This single-circuit, three-input device operates across a wide supply voltage range of 1.65V to 5.5V and maintains active product status with full RoHS3 compliance. Substitute parts are identified when equivalent electrical specifications and mechanical compatibility requirements are met within the 74LVC logic family.

Substiute Parts

74LVC1G97GS,132

Nexperia USA Inc.In Stock: 553874LVC1G97GS,132 Datasheet

Current PartRFQ

74LVC1G97FW4-7

Diodes IncorporatedIn Stock: 3022474LVC1G97FW4-7 Datasheet

DirectRFQ

74LVC1G97FZ4-7

Diodes IncorporatedIn Stock: 3529174LVC1G97FZ4-7 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the 74LVC1G97GS,132 are qualified based on the following criteria:

Electrical Equivalence Requirements:

• Base product number: 74LVC1G97
• Logic type: Configurable Multiple Function
• Number of circuits: 1
• Number of inputs: 3
• Output type: Single-Ended
• Output current capability: 32mA (high and low)
• Supply voltage range: 1.65V ~ 5.5V
• Operating temperature range: -40°C ~ 125°C

Mechanical Compatibility Requirements:

• Mounting type: Surface Mount
• Package classification: 6-XFDFN (allows different supplier package designations for the same physical footprint)
• Schmitt trigger input: No
• MSL rating: 1 (Unlimited)

Compliance Requirements:

• RoHS3 Compliant
• REACH Unaffected
• ECCN: EAR99
• HTSUS: 8542.39.0001

Parts meeting all electrical, mechanical, and compliance criteria are considered direct substitutes within the same application context.

Parameter Comparison

Engineering Selection Recommendations

All three parts—74LVC1G97GS,132, 74LVC1G97FW4-7, and 74LVC1G97FZ4-7—are functionally equivalent and meet identical electrical and mechanical specifications. Selection between these parts should be based on:

Availability and Lead Time: Inventory levels vary by supplier and part number. The 74LVC1G97FZ4-7 maintains the highest stock level at 35,200 pieces, followed by 74LVC1G97FW4-7 at 30,200 pieces, and 74LVC1G97GS,132 at 5,526 pieces.

Compliance Status: All parts maintain active product status and full compliance with RoHS3, REACH, and applicable trade regulations (ECCN: EAR99, HTSUS: 8542.39.0001).

Package Designation Differences: While all parts use the 6-XFDFN package footprint, supplier device package designations differ (SOT1202 for Nexperia, X2-DFN1010-6 for 74LVC1G97FW4-7, and X2-DFN1410-6 for 74LVC1G97FZ4-7). These designations reflect manufacturer-specific labeling conventions for the same physical package.

Frequently Asked Questions (FAQ)

Q: Are 74LVC1G97FW4-7 and 74LVC1G97FZ4-7 pin-compatible with 74LVC1G97GS,132?

A: Yes. All three parts share identical electrical specifications, pin counts (3 inputs, single output), and the same 6-XFDFN surface mount package footprint. They are electrically and mechanically interchangeable.

Q: What determines if a part can substitute for the 74LVC1G97GS,132?

A: Substitution is determined by matching the base product number (74LVC1G97), logic type (Configurable Multiple Function), circuit and input count (1 circuit, 3 inputs), output current capability (32mA), supply voltage range (1.65V ~ 5.5V), operating temperature range (-40°C ~ 125°C), and package classification (6-XFDFN surface mount). All compliance certifications must also align.

Q: Do the different supplier package designations affect PCB layout or assembly?

A: No. The supplier device package designations (SOT1202, X2-DFN1010-6, X2-DFN1410-6) are manufacturer-specific naming conventions for the same physical 6-XFDFN footprint. PCB layout and assembly processes remain identical.

Q: Are there any temperature or voltage operating differences between these parts?

A: No. All three parts operate identically across the full supply voltage range of 1.65V to 5.5V and the complete temperature range of -40°C to 125°C.

Q: Which part should be selected for new designs?

A: Any of the three parts is suitable for new designs. Selection should prioritize availability, lead time, and cost based on current supply chain conditions. All parts maintain active product status and equivalent long-term support.