74LVC1G10GM,115 Equivalent & Substitute Parts

Part Overview

The 74LVC1G10GM,115 is a single-channel 3-input NAND gate logic IC manufactured by Nexperia USA Inc. in a 6-XSON (SOT886) surface mount package. This component operates across a wide supply voltage range of 1.65V to 5.5V and is classified as an active product with full RoHS3 compliance. Equivalent and substitute parts are identified based on matching logic function, electrical performance parameters, and mechanical compatibility within the 74LVC series.

Key Parameters

Parameter	Value
Logic Type	NAND Gate
Number of Circuits	1
Number of Inputs	3
Voltage - Supply	1.65V ~ 5.5V
Current - Output High, Low	32mA, 32mA
Input Logic Level - Low	0.7V ~ 0.8V
Input Logic Level - High	1.7V ~ 2V
Max Propagation Delay @ 5V, 50pF	3.6ns
Operating Temperature	-40°C ~ 125°C
Mounting Type	Surface Mount
Package / Case	6-XFDFN
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)

Substitute Part Grouping Explanation

Substitute parts for the 74LVC1G10GM,115 are qualified based on the following criteria:

Functional Equivalence: All substitute parts maintain identical logic function (single-channel 3-input NAND gate) within the 74LVC series.

Electrical Parameters: Substitute parts must match the following critical electrical specifications:

Supply voltage range: 1.65V ~ 5.5V
Output current capability: 32mA (high and low)
Input logic levels: Low 0.7V ~ 0.8V, High 1.7V ~ 2V
Propagation delay: 3.6ns @ 5V, 50pF
Operating temperature range: -40°C ~ 125°C

Mechanical Compatibility: All substitute parts are surface mount devices in 6-pin packages (6-XFDFN or equivalent footprint variants) suitable for direct board-level replacement.

Compliance: All substitute parts maintain RoHS3 compliance, MSL Level 1, and REACH unaffected status.

Parameter Comparison

Manufacturer Part Number	Manufacturer	Packaging	Voltage - Supply	Current - Quiescent (Max)	Current - Output High, Low	Max Propagation Delay @ 5V, 50pF	Package / Case	Inventory Status
74LVC1G10GM,115	Nexperia USA Inc.	Tape & Reel (TR)	1.65V ~ 5.5V	4 µA	32mA, 32mA	3.6ns	6-XFDFN	5864 Pcs
74LVC1G10FZ4-7	Diodes Incorporated	Tape & Reel (TR)	1.65V ~ 5.5V	40 µA	32mA, 32mA	3.6ns	6-XFDFN	867 Pcs
SN74LVC1G10DRYR	Texas Instruments	Tape & Reel (TR)	1.65V ~ 5.5V	10 µA	32mA, 32mA	3.6ns	6-UFDFN	5214 Pcs
SN74LVC1G10DSFR	Texas Instruments	Cut Tape (CT) & Digi-Reel®	1.65V ~ 5.5V	10 µA	32mA, 32mA	3.6ns	6-XFDFN	8892 Pcs

Engineering Selection Recommendations

All four parts listed maintain active product status and full compliance with RoHS3, REACH unaffected, and MSL Level 1 requirements. Selection between the main part and substitutes should be based on:

Inventory Availability: SN74LVC1G10DSFR (Texas Instruments) offers the highest inventory level at 8892 pieces, followed by the main part at 5864 pieces.

Quiescent Current Characteristics: The main part (74LVC1G10GM,115) and SN74LVC1G10DRYR both demonstrate lower quiescent current specifications (4 µA and 10 µA respectively) compared to 74LVC1G10FZ4-7 (40 µA), which may be relevant for power-sensitive applications.

Packaging Format: SN74LVC1G10DSFR is available in Cut Tape and Digi-Reel format, while other parts are supplied in standard Tape & Reel format.

Package Footprint Variants: SN74LVC1G10DRYR uses a 6-UFDFN package, while the main part and SN74LVC1G10DSFR use 6-XFDFN. Both are 6-pin surface mount packages with compatible electrical performance.

Frequently Asked Questions (FAQ)

Q: Can SN74LVC1G10DSFR be used as a direct replacement for 74LVC1G10GM,115?

A: Yes. Both parts share identical logic function, electrical parameters, and package footprint (6-XFDFN). The primary difference is the packaging format (Cut Tape & Digi-Reel vs. Tape & Reel) and manufacturer (Texas Instruments vs. Nexperia).

Q: What is the significance of the quiescent current difference between parts?

A: Quiescent current (4 µA to 40 µA) represents standby power consumption. The main part and SN74LVC1G10DRYR exhibit lower quiescent current, which may provide advantages in battery-powered or low-power applications. This difference does not affect functional compatibility.

Q: Are the 6-XFDFN and 6-UFDFN packages interchangeable?

A: Both are 6-pin surface mount packages with compatible electrical performance and similar physical dimensions. However, PCB footprint design should be verified against the specific package datasheet to ensure mechanical fit.

Q: Do all substitute parts meet the same compliance standards?

A: Yes. All parts listed maintain RoHS3 compliance, REACH unaffected status, and MSL Level 1 rating, ensuring equivalent environmental and regulatory compliance.

Q: Which part should be selected for high-volume production?

A: Selection should prioritize parts with stable inventory levels and established supply chain relationships. SN74LVC1G10DSFR and 74LVC1G10GM,115 both offer substantial inventory quantities suitable for production requirements.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message