74LVC1G10FZ4-7 Equivalent & Substitute Parts

Part Overview

The 74LVC1G10FZ4-7 is a single-channel 3-input NAND gate logic IC manufactured by Diodes Incorporated in an X2-DFN1410-6 surface mount package. This component is classified as Active product status and is RoHS3 compliant. Equivalent and substitute parts are identified based on matching functional logic type, circuit configuration, electrical performance parameters, and operating specifications to ensure direct functional replacement in circuit applications.

Substiute Parts

74LVC1G10FZ4-7

Diodes IncorporatedIn Stock: 95374LVC1G10FZ4-7 Datasheet

Current PartRFQ

SN74LVC1G10DRYR

Texas InstrumentsIn Stock: 5286SN74LVC1G10DRYR Datasheet

MFR RecommendedRFQ

74LVC1G10GM,115

NXP USA Inc.In Stock: 20505074LVC1G10GM,115 Datasheet

Parametric EquivalentRFQ

SN74LVC1G10DSFR

Texas InstrumentsIn Stock: 8903SN74LVC1G10DSFR Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the 74LVC1G10FZ4-7 are qualified based on the following criteria:

Functional Equivalence: All substitute parts maintain identical logic type (NAND Gate), circuit count (1 channel), and input configuration (3 inputs).

Electrical Compatibility: All substitutes operate within the same supply voltage range (1.65V ~ 5.5V), maintain identical output current specifications (32mA high and low), and share matching input logic level thresholds (0.7V ~ 0.8V low, 1.7V ~ 2V high).

Performance Parameters: All substitutes deliver the same maximum propagation delay of 3.6ns at 5V with 50pF load, ensuring timing compatibility in circuit applications.

Operating Conditions: All substitutes support the full industrial temperature range (-40°C ~ 125°C) and are surface mount devices with MSL 1 rating.

Compliance: All substitutes maintain ROHS3 compliance and REACH unaffected status, meeting regulatory requirements equivalent to the main part.

Parameter Comparison

Engineering Selection Recommendations

All three substitute parts are functionally equivalent to the 74LVC1G10FZ4-7 based on electrical and logical specifications. Selection among substitutes depends on packaging format and availability requirements:

SN74LVC1G10DRYR (Texas Instruments) is qualified as the manufacturer-recommended substitute, available in Tape & Reel packaging with ROHS3 compliance and MSL 1 rating. This part maintains full compatibility with the original specification.

74LVC1G10GM,115 (NXP USA Inc.) is a parametric equivalent available in bulk packaging format. This part demonstrates superior quiescent current performance (4 µA versus 40 µA in the main part) while maintaining all critical electrical parameters. Bulk packaging may require alternative handling procedures compared to tape and reel formats.

SN74LVC1G10DSFR (Texas Instruments) is a parametric equivalent available in Cut Tape and Digi-Reel packaging. This part maintains ROHS3 compliance and MSL 1 rating with identical electrical specifications to SN74LVC1G10DRYR.

All substitutes maintain Active product status and meet regulatory compliance requirements. Package selection should align with assembly process requirements and inventory management protocols.

Frequently Asked Questions (FAQ)

Q: Can SN74LVC1G10DRYR directly replace 74LVC1G10FZ4-7 in existing designs?

A: Yes. Both parts share identical logic type, circuit configuration, supply voltage range, output current ratings, input logic levels, and propagation delay specifications. The primary difference is package format (6-UFDFN versus 6-XFDFN), which requires PCB layout verification for pin compatibility.

Q: What is the significance of quiescent current differences among substitutes?

A: Quiescent current values (40 µA for 74LVC1G10FZ4-7, 10 µA for SN74LVC1G10DRYR and SN74LVC1G10DSFR, 4 µA for 74LVC1G10GM,115) represent standby power consumption. Lower quiescent current in substitute parts may provide power efficiency benefits in battery-powered or low-power applications without affecting functional performance.

Q: Are package differences between 6-XFDFN, 6-UFDFN, and 6-XSON significant for substitution?

A: Package differences require PCB layout verification. While all packages are 6-pin surface mount configurations with similar footprints, pin spacing and pad dimensions may vary. Design engineers must confirm footprint compatibility before implementing substitutes in existing circuit boards.

Q: Do all substitutes meet the same compliance standards as the main part?

A: SN74LVC1G10DRYR and SN74LVC1G10DSFR maintain ROHS3 compliance and MSL 1 rating equivalent to the main part. 74LVC1G10GM,115 compliance specifications are not provided in available documentation. Compliance verification is recommended for regulated applications.

Q: What packaging formats are available for each substitute?

A: SN74LVC1G10DRYR is available in Tape & Reel format. 74LVC1G10GM,115 is available in Bulk format. SN74LVC1G10DSFR is available in Cut Tape and Digi-Reel format. Packaging selection should align with assembly equipment and procurement requirements.