74LVC1G06FS3-7 Equivalent & Substitute Parts

Part Overview

The 74LVC1G06FS3-7 is a single-channel inverter IC with open drain output manufactured by Diodes Incorporated. This logic component operates across a wide supply voltage range of 1.65V to 5.5V and is designed for surface mount applications in the 4-XFDFN package. The part is currently active in production with full RoHS3 compliance and unlimited moisture sensitivity rating. Substitute parts are identified when equivalent functional performance, electrical specifications, and package compatibility can be maintained across different manufacturers.

Substiute Parts

74LVC1G06FS3-7

Diodes IncorporatedIn Stock: 105674LVC1G06FS3-7 Datasheet

Current PartRFQ

SN74LVC1G06DPWR

Texas InstrumentsIn Stock: 8068SN74LVC1G06DPWR Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the 74LVC1G06FS3-7 are qualified based on the following criteria:

Functional Equivalence: Both the main part and substitute must operate as single-channel inverters with open drain output configuration.

Electrical Compatibility: Supply voltage range, input logic levels, output current capability, and operating temperature range must match or exceed the original specification.

Logic Series Alignment: Both parts belong to the 74LVC logic family, ensuring consistent electrical characteristics and interface compatibility.

Package Compatibility: Surface mount packaging with equivalent footprint and pin configuration allows direct board-level substitution.

Compliance Alignment: RoHS3 compliance and MSL rating must be maintained to ensure manufacturing and storage compatibility.

The SN74LVC1G06DPWR from Texas Instruments meets all substitution criteria while maintaining functional and electrical equivalence.

Parameter Comparison

Engineering Selection Recommendations

Both the 74LVC1G06FS3-7 and SN74LVC1G06DPWR are active production parts with full RoHS3 compliance and unlimited moisture sensitivity rating. Selection between these parts should be based on availability and supply chain requirements. The SN74LVC1G06DPWR demonstrates lower quiescent current consumption (10 µA versus 200 µA) and faster propagation delay (4.6ns versus 4ns), which may provide advantages in power-sensitive or timing-critical applications. Both parts maintain identical electrical interface specifications and package compatibility, ensuring functional interchangeability in circuit design.

Frequently Asked Questions (FAQ)

Q: Can the SN74LVC1G06DPWR directly replace the 74LVC1G06FS3-7 on an existing PCB?

A: Yes. Both parts use the 4-XFDFN package with identical pin configuration and electrical interface specifications. Direct board-level substitution is possible without circuit modification.

Q: Are there differences in supply voltage requirements between these parts?

A: No. Both parts operate across the identical supply voltage range of 1.65V to 5.5V with matching input and output logic levels.

Q: What is the significance of the quiescent current difference?

A: The SN74LVC1G06DPWR operates at 10 µA quiescent current compared to 200 µA for the 74LVC1G06FS3-7. This difference affects standby power consumption and may be relevant in battery-powered or low-power applications.

Q: Do both parts meet the same compliance standards?

A: Yes. Both parts are ROHS3 compliant with MSL rating of 1 (Unlimited), ensuring equivalent manufacturing, storage, and handling requirements.

Q: Is there a timing performance difference between these parts?

A: The SN74LVC1G06DPWR exhibits slightly faster propagation delay (4.6ns at 5V, 50pF) compared to the 74LVC1G06FS3-7 (4ns at 5V, 50pF). Both meet standard 74LVC timing specifications for inverter logic.