74LVC10AD,118 Equivalent & Substitute Parts

Part Overview

The 74LVC10AD,118 is a NAND Gate IC featuring 3 channels with 3 inputs per channel in a 14-SO surface mount package, manufactured by Nexperia USA Inc. This logic component operates across a supply voltage range of 1.2V to 3.6V and is designed for low-power digital applications. The part is currently active in production with full RoHS3 compliance and unlimited moisture sensitivity rating. Equivalent and substitute parts are identified based on matching functional specifications, electrical parameters, and package compatibility to support design flexibility and supply chain alternatives.

Substiute Parts

74LVC10AD,118

Nexperia USA Inc.In Stock: 127074LVC10AD,118 Datasheet

Current PartRFQ

SN74LVC10AD

Texas InstrumentsIn Stock: 10388SN74LVC10AD Datasheet

SimilarRFQ

SN74LVC10ADR

Texas InstrumentsIn Stock: 6162SN74LVC10ADR Datasheet

SimilarRFQ

SN74LVC10ADT

Texas InstrumentsIn Stock: 5375SN74LVC10ADT Datasheet

SimilarRFQ

SN74LVC10ANSR

Texas InstrumentsIn Stock: 5184SN74LVC10ANSR Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the 74LVC10AD,118 are identified based on the following critical parameters that determine functional and physical compatibility:

Functional Equivalence Criteria:

• Logic Type: NAND Gate
• Number of Circuits: 3
• Number of Inputs: 3 per circuit
• Operating Temperature Range: -40°C ~ 125°C
• Output Drive Capability: 24mA (High and Low)

Electrical Compatibility Criteria:

• Supply Voltage Range: Minimum 1.65V to 3.6V (compatible with 1.2V ~ 3.6V specification)
• Propagation Delay: 4.7ns @ 3.3V, 50pF (meets or exceeds performance)
• Quiescent Current: 1 µA (within acceptable operating parameters)

Physical Compatibility Criteria:

• Mounting Type: Surface Mount
• Package Family: 14-SOIC or 14-SO
• Pin Configuration: Identical to base product 74LVC10

All substitute parts listed maintain the 74LVC series designation, ROHS3 compliance, and MSL Level 1 rating, ensuring direct substitution capability in existing designs.

Parameter Comparison

Engineering Selection Recommendations

All listed substitute parts maintain active product status and full ROHS3 compliance, ensuring regulatory and environmental compatibility with the original 74LVC10AD,118 specification. The Texas Instruments SN74LVC10 variants (SN74LVC10AD, SN74LVC10ADR, SN74LVC10ADT, SN74LVC10ANSR) are functionally equivalent alternatives from an established manufacturer with identical logic configuration and operating temperature range.

The primary distinction among substitute options relates to packaging format and physical dimensions. SN74LVC10AD, SN74LVC10ADR, and SN74LVC10ADT are supplied in 14-SOIC packages with 0.154" width (3.90mm), matching the original part's physical footprint. SN74LVC10ANSR uses a 14-SO package with 0.209" width (5.30mm), which may require PCB layout verification for compatibility.

Texas Instruments substitutes demonstrate improved quiescent current performance (1 µA versus 40 µA) and faster propagation delay (4.7ns versus 5.7ns), providing enhanced efficiency in low-power and high-speed applications. The minimum supply voltage specification of 1.65V for Texas Instruments parts is compatible with designs operating at or above this threshold.

Frequently Asked Questions (FAQ)

Q: Can SN74LVC10AD replace 74LVC10AD,118 in existing designs?

A: Yes. Both parts share identical logic configuration (3-channel NAND gate with 3 inputs), output drive capability (24mA), operating temperature range (-40°C to 125°C), and 14-SOIC package dimensions (0.154", 3.90mm width). Functional and physical compatibility is confirmed.

Q: What is the difference between SN74LVC10ADR and SN74LVC10ADT?

A: Both parts are functionally identical with matching electrical specifications. The difference is in packaging format: SN74LVC10ADR is supplied in Cut Tape (CT) & Digi-Reel format, while SN74LVC10ADT is supplied in Tape & Reel (TR) format. Selection depends on assembly process requirements.

Q: Why does SN74LVC10ANSR have a different package width?

A: SN74LVC10ANSR uses a 14-SO package with 0.209" width (5.30mm), compared to the standard 14-SOIC 0.154" width (3.90mm) of other substitutes. This larger package may require PCB layout modification and should be verified before implementation.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. All listed substitute parts (SN74LVC10AD, SN74LVC10ADR, SN74LVC10ADT, SN74LVC10ANSR) maintain ROHS3 compliance and MSL Level 1 rating, matching the environmental and regulatory specifications of the original 74LVC10AD,118.

Q: What is the minimum supply voltage for substitute parts?

A: Texas Instruments SN74LVC10 variants operate at 1.65V to 3.6V supply voltage. The original Nexperia part operates at 1.2V to 3.6V. For applications requiring operation below 1.65V, the original 74LVC10AD,118 is required.

Q: Do substitute parts have better performance than the original?

A: Texas Instruments substitutes demonstrate lower quiescent current (1 µA versus 40 µA) and faster propagation delay (4.7ns versus 5.7ns at 3.3V, 50pF load). These improvements provide enhanced efficiency and speed, though both specifications meet standard 74LVC10 series requirements.