74LVC07APW-Q100J Equivalent & Substitute Parts

Part Overview

The 74LVC07APW-Q100J is a non-inverting buffer IC manufactured by Nexperia USA Inc., designed for logic-level signal buffering applications. This 6-element, open-drain output buffer operates across a wide supply voltage range of 1.2V to 5.5V and is qualified to AEC-Q100 automotive standards. The part is currently active in production with 3113 units in stock. Equivalent and substitute parts are identified to support design flexibility, supply chain continuity, and application-specific requirements where voltage ranges or output current specifications differ from the primary part.

Substiute Parts

74LVC07APW-Q100J

Nexperia USA Inc.In Stock: 319974LVC07APW-Q100J Datasheet

Current PartRFQ

74LVC07APW,118

Nexperia USA Inc.In Stock: 1185374LVC07APW,118 Datasheet

Parametric EquivalentRFQ

MC74LCX07DTR2G

onsemiIn Stock: 10063MC74LCX07DTR2G Datasheet

DirectRFQ

74LCX07YTTR

STMicroelectronicsIn Stock: 82274LCX07YTTR Datasheet

SimilarRFQ

SN74LVC07AMPWREP

Texas InstrumentsIn Stock: 55377SN74LVC07AMPWREP Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 74LVC07APW-Q100J is determined by the following critical parameters:

• Logic Function: All substitutes must provide non-inverting buffer operation with 6 elements, 1 bit per element
• Output Configuration: Open-drain output topology is mandatory
• Package Compatibility: 14-TSSOP surface-mount package required for mechanical and thermal compatibility
• Voltage Supply Range: Substitute must support the application's operating voltage; the primary part operates 1.2V ~ 5.5V
• Output Current: Minimum 24mA sink current required; primary part provides 32mA
• Operating Temperature: Substitute must cover the required temperature range; primary part covers -40°C ~ 125°C
• Compliance: RoHS3 compliance and automotive qualification (AEC-Q100) are required for automotive applications

Substitutes are grouped as follows:

Parametric Equivalent: 74LVC07APW,118 — Identical electrical specifications and packaging; differs only in packaging format (Cut Tape & Digi-Reel vs. Tape & Reel).

Direct Manufacturer Equivalent: MC74LCX07DTR2G — Same logic function and package; operates within reduced voltage range (2V ~ 3.6V) and temperature range (-40°C ~ 85°C); output current reduced to 24mA.

Similar Substitute: 74LCX07YTTR — Same logic function and package; voltage range limited to 2V ~ 3.6V; temperature range -40°C ~ 85°C; output current 24mA; automotive qualified (AEC-Q100).

Similar Substitute: SN74LVC07AMPWREP — Same logic function and package; extended voltage range (1.65V ~ 5.5V); extended temperature range (-55°C ~ 125°C); output current reduced to 24mA.

Parameter Comparison

Engineering Selection Recommendations

Primary Selection: 74LVC07APW,118 is the direct parametric equivalent and recommended first choice for direct replacement. It maintains identical electrical specifications and RoHS3 compliance; the only difference is packaging format (Cut Tape & Digi-Reel vs. Tape & Reel).

Automotive Applications: For designs requiring AEC-Q100 qualification, select between 74LVC07APW-Q100J (primary) or 74LCX07YTTR (substitute). The 74LCX07YTTR operates within a narrower voltage range (2V ~ 3.6V) and temperature range (-40°C ~ 85°C); verify application compatibility before selection.

Extended Temperature Range: SN74LVC07AMPWREP extends the operating temperature range to -55°C ~ 125°C and supports voltage range 1.65V ~ 5.5V. This part is suitable for applications requiring lower minimum voltage or extended low-temperature operation. Output current is reduced to 24mA.

Reduced Voltage Range Applications: MC74LCX07DTR2G operates within 2V ~ 5.5V and -40°C ~ 85°C. This part is suitable for applications that do not require sub-2V operation or temperatures above 85°C. Output current is 24mA.

Supply Chain Continuity: All substitutes are active products with confirmed inventory. Selection should prioritize application voltage and temperature requirements, then consider output current specifications and automotive qualification status.

Frequently Asked Questions (FAQ)

Q: Can 74LVC07APW,118 replace 74LVC07APW-Q100J directly?

A: Yes. Both parts are parametrically identical with 1.2V ~ 5.5V supply range, 32mA output current, and -40°C ~ 125°C operating temperature. The difference is packaging format: 74LVC07APW,118 is supplied in Cut Tape & Digi-Reel format, while 74LVC07APW-Q100J is Tape & Reel. Both are RoHS3 compliant and active products.

Q: Is MC74LCX07DTR2G suitable for 1.2V operation?

A: No. MC74LCX07DTR2G has a minimum supply voltage of 2V, whereas the primary part operates down to 1.2V. This substitute is not compatible with applications requiring sub-2V operation.

Q: What is the difference between 74LCX07YTTR and SN74LVC07AMPWREP?

A: 74LCX07YTTR operates 2V ~ 3.6V and -40°C ~ 85°C with AEC-Q100 automotive qualification. SN74LVC07AMPWREP operates 1.65V ~ 5.5V and -55°C ~ 125°C without specified automotive qualification. Select 74LCX07YTTR for automotive applications within the 2V ~ 3.6V range; select SN74LVC07AMPWREP for extended voltage and temperature coverage in non-automotive or non-qualified applications.

Q: Do all substitutes use the same 14-TSSOP package?

A: Yes. All listed substitutes use the 14-TSSOP (0.173", 4.40mm Width) surface-mount package, ensuring mechanical and thermal compatibility with the primary part.

Q: What is the minimum output current requirement for selection?

A: The primary part provides 32mA sink current. All substitutes provide minimum 24mA. Verify that your application load does not exceed 24mA if selecting a substitute with reduced output current specification.

Q: Are all substitutes RoHS3 compliant?

A: Yes. All listed substitutes are RoHS3 compliant. Automotive qualification (AEC-Q100) is specified only for 74LVC07APW-Q100J and 74LCX07YTTR.