74LVC07APW/AUJ Equivalent & Substitute Parts

Part Overview

The 74LVC07APW/AUJ is a Buffer, Non-Inverting logic IC manufactured by NXP USA Inc. in the 74LVC series. This device features 6 elements with 1 bit per element and open drain output configuration, operating across a supply voltage range of 1.2V to 5.5V. The part is classified as Active product status and is ROHS3 compliant. Substitute parts are identified when equivalent electrical characteristics and mechanical specifications align with the main part's functional requirements, enabling component interchangeability in circuit designs where the 74LVC07 base functionality is required.

Substiute Parts

74LVC07APW/AUJ

NXP USA Inc.In Stock: 120174LVC07APW/AUJ Datasheet

Current PartRFQ

74LVC07APW,118

Nexperia USA Inc.In Stock: 1185374LVC07APW,118 Datasheet

Parametric EquivalentRFQ

74LVC07APW-Q100J

Nexperia USA Inc.In Stock: 319974LVC07APW-Q100J Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the 74LVC07APW/AUJ are identified based on strict parametric equivalence. The following electrical and mechanical parameters must match to establish substitution validity:

• Logic Type: Buffer, Non-Inverting
• Number of Elements: 6
• Number of Bits per Element: 1
• Output Type: Open Drain
• Current - Output High, Low: -, 32mA
• Voltage - Supply: 1.2V ~ 5.5V
• Operating Temperature: -40°C ~ 125°C (TA)
• Package / Case: 14-TSSOP (0.173", 4.40mm Width)
• Mounting Type: Surface Mount
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level (MSL): 1 (Unlimited)

All identified substitutes maintain these core parameters, ensuring functional and mechanical compatibility within the 74LVC07 base product family.

Parameter Comparison

Engineering Selection Recommendations

All three parts—74LVC07APW/AUJ, 74LVC07APW,118, and 74LVC07APW-Q100J—are parametrically equivalent and maintain Active product status with ROHS3 compliance. Selection between these parts should be based on:

1. Packaging requirements: The 74LVC07APW,118 is available in Cut Tape (CT) & Digi-Reel® format, while the 74LVC07APW-Q100J is supplied in Tape & Reel (TR) format.

2. Automotive qualification: The 74LVC07APW-Q100J carries AEC-Q100 qualification and Automotive grade designation, making it suitable for automotive applications requiring this certification level.

3. Inventory availability: Component selection may be influenced by stock levels and lead time requirements across different packaging and qualification variants.

Frequently Asked Questions (FAQ)

Q: Can 74LVC07APW,118 be used as a direct replacement for 74LVC07APW/AUJ?

A: Yes. Both parts are parametrically equivalent with identical electrical characteristics, output specifications, voltage supply range, operating temperature range, and 14-TSSOP package configuration. The primary difference is packaging format (Cut Tape & Digi-Reel® versus standard packaging).

Q: What is the difference between 74LVC07APW-Q100J and the other variants?

A: The 74LVC07APW-Q100J is qualified to AEC-Q100 automotive standards and carries Automotive grade designation. Electrically and mechanically, it is equivalent to other 74LVC07 variants. This qualification is required for automotive applications but is not necessary for general industrial or consumer applications.

Q: Are all three parts compatible with the same PCB layout?

A: Yes. All three parts use the identical 14-TSSOP package with 0.173" width and 4.40mm dimensions, ensuring compatibility with the same PCB footprint and surface mount assembly process.

Q: What does open drain output mean for substitution purposes?

A: Open drain output is a critical functional parameter. All substitute parts must maintain this output type to ensure circuit compatibility. This configuration requires external pull-up resistors and is not interchangeable with push-pull or other output types.

Q: Is moisture sensitivity a concern when selecting between these parts?

A: All three parts carry MSL 1 (Unlimited) rating, indicating no moisture sensitivity restrictions. Storage and handling requirements are identical across all variants.