74LVC07ADTR2G Equivalent & Substitute Parts

Part Overview

The 74LVC07ADTR2G is a Buffer, Non-Inverting logic IC manufactured by onsemi, featuring 6 elements with 1 bit per element and open drain output configuration in a 14-TSSOP surface mount package. This part is classified as obsolete, making equivalent and substitute parts necessary for ongoing design support and procurement continuity. The device operates across a supply voltage range of 1.2V to 5.5V with an output current capability of 32mA (low), suitable for general-purpose buffering applications in logic circuits.

Substiute Parts

74LVC07ADTR2G

onsemiIn Stock: 226874LVC07ADTR2G Datasheet

Current PartRFQ

MC74LCX07DTR2G

onsemiIn Stock: 10063MC74LCX07DTR2G Datasheet

SimilarRFQ

74LVC07APW,118

Nexperia USA Inc.In Stock: 1185374LVC07APW,118 Datasheet

Parametric EquivalentRFQ

74LVC07APW-Q100J

Nexperia USA Inc.In Stock: 319974LVC07APW-Q100J Datasheet

Parametric EquivalentRFQ

74LVC07APW/AUJ

NXP USA Inc.In Stock: 120174LVC07APW/AUJ Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the 74LVC07ADTR2G are classified based on strict adherence to the following critical parameters that determine functional compatibility:

Primary Substitution Criteria:

• Logic Type: Buffer, Non-Inverting
• Number of Elements: 6
• Number of Bits per Element: 1
• Output Type: Open Drain
• Package / Case: 14-TSSOP (0.173", 4.40mm Width)
• Mounting Type: Surface Mount
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level (MSL): 1 (Unlimited)

Secondary Compatibility Parameters:

• Voltage - Supply range compatibility
• Operating Temperature range
• Current - Output Low capability

Substitutes are grouped into two categories: Parametric Equivalents (matching all primary and secondary parameters) and Similar Alternatives (matching primary parameters with minor variations in electrical specifications).

Parameter Comparison

Engineering Selection Recommendations

Parametric Equivalents (Full Compatibility):

The 74LVC07APW,118, 74LVC07APW-Q100J, and 74LVC07APW/AUJ are parametric equivalents to the 74LVC07ADTR2G. These parts maintain identical electrical specifications including 32mA output current capability, 1.2V to 5.5V supply voltage range, and -40°C to 125°C operating temperature. All three are manufactured by Nexperia/NXP USA Inc. and carry active product status with ROHS3 compliance. The 74LVC07APW-Q100J includes AEC-Q100 automotive qualification, suitable for applications requiring automotive-grade components.

Similar Alternative (Reduced Specifications):

The MC74LCX07DTR2G from onsemi is a similar alternative with the following parameter variations: reduced output current capability (24mA versus 32mA), narrower supply voltage range (2V to 5.5V versus 1.2V to 5.5V), and reduced operating temperature range (-40°C to 85°C versus -40°C to 125°C). This part is suitable for applications where these reduced specifications are acceptable and where onsemi sourcing is preferred.

Selection Basis:

All substitute parts maintain identical logic functionality, package configuration, and compliance certifications. Selection should be based on product availability, supply chain requirements, and specific application electrical constraints. The active product status of all substitute parts ensures long-term procurement viability compared to the obsolete main part.

Frequently Asked Questions (FAQ)

Q: Can MC74LCX07DTR2G be used as a direct replacement for 74LVC07ADTR2G?

A: MC74LCX07DTR2G is functionally compatible for applications operating within its specified parameters. However, it has reduced output current capability (24mA versus 32mA), a narrower supply voltage range (2V to 5.5V versus 1.2V to 5.5V), and a lower maximum operating temperature (85°C versus 125°C). Verify that your application does not require the higher current, lower voltage operation, or extended temperature range of the original part.

Q: Are the Nexperia 74LVC07APW variants pin-compatible with the onsemi 74LVC07ADTR2G?

A: Yes. All substitute parts use the identical 14-TSSOP package with the same pin configuration. Pin-to-pin compatibility is confirmed across all listed substitutes.

Q: What is the difference between 74LVC07APW,118 and 74LVC07APW-Q100J?

A: Both parts are parametric equivalents with identical electrical specifications. The primary difference is packaging format (Cut Tape & Digi-Reel versus Tape & Reel) and the 74LVC07APW-Q100J includes AEC-Q100 automotive qualification. Select based on packaging requirements and whether automotive-grade certification is needed.

Q: Why is the 74LVC07ADTR2G marked as obsolete?

A: The obsolete status indicates that onsemi has discontinued this part number. Active substitute parts from Nexperia/NXP USA Inc. are available to support ongoing design requirements and procurement needs.

Q: Can I use 74LVC07APW/AUJ in high-temperature applications?

A: Yes. The 74LVC07APW/AUJ supports the full operating temperature range of -40°C to 125°C, matching the original 74LVC07ADTR2G specification and suitable for extended temperature applications.