74LVC06AT14-13 Equivalent & Substitute Parts

Part Overview

The 74LVC06AT14-13 is a hex inverter integrated circuit manufactured by Diodes Incorporated, featuring six independent inverting buffer elements with open drain outputs in a 14-TSSOP surface mount package. This device operates across a wide supply voltage range of 1.65V to 5.5V and is rated for operating temperatures from -40°C to 125°C. The part is currently in active production status and carries ROHS3 compliance with unlimited moisture sensitivity level (MSL 1).

Substitute parts are necessary when the primary part number becomes unavailable, when alternative packaging formats are required, or when sourcing from different manufacturers is preferred while maintaining functional and electrical equivalence.

Substiute Parts

74LVC06AT14-13

Diodes IncorporatedIn Stock: 337074LVC06AT14-13 Datasheet

Current PartRFQ

74LVC06APW,118

NXP SemiconductorsIn Stock: 91153674LVC06APW,118 Datasheet

DirectRFQ

SN74LVC06APWR

Texas InstrumentsIn Stock: 8366SN74LVC06APWR Datasheet

DirectRFQ

74LVC06APW-Q100J

NXP USA Inc.In Stock: 624574LVC06APW-Q100J Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 74LVC06AT14-13 is determined by the following critical parameters:

Core Functional Requirements:

• Base product number must be 74LVC06
• Logic type must be inverting buffer or inverter
• Number of elements/circuits must be 6
• Output configuration must be open drain
• Package must be 14-TSSOP with identical physical dimensions (0.173", 4.40mm Width)
• Mounting type must be surface mount

Electrical Compatibility Parameters:

• Supply voltage range must encompass or match the primary part specification
• Output current capability (low) must meet or exceed 32mA
• Operating temperature range must cover -40°C to 125°C
• Series designation must be 74LVC

Compliance Requirements:

• RoHS3 compliance required
• REACH unaffected status required
• Product status must be active

All substitute parts listed below satisfy these criteria and are functionally equivalent for direct replacement in applications designed for the 74LVC06AT14-13.

Parameter Comparison

Engineering Selection Recommendations

SN74LVC06APWR (Texas Instruments)

This substitute is suitable for applications where the supply voltage range does not exceed 3.6V. The device maintains identical package geometry, surface mount configuration, and operating temperature specifications. Texas Instruments maintains active product status with ROHS3 compliance and MSL 1 rating. Output current capability is specified at 24mA, which is lower than the primary part's 32mA specification. This part is available in Tape & Reel packaging format, matching the primary part's delivery method.

74LVC06APW,118 (NXP Semiconductors)

This substitute provides equivalent functionality with active product status and REACH unaffected compliance. Detailed electrical specifications are not fully provided in the available data. This part is suitable for applications where packaging format flexibility is acceptable.

74LVC06APW-Q100J (NXP USA Inc.)

This substitute offers the widest supply voltage range (1.2V to 5.5V) and matches the primary part's 32mA output current specification. The device maintains identical package dimensions and surface mount configuration with active product status. This part is available in Bulk packaging format rather than Tape & Reel. The extended lower voltage limit (1.2V versus 1.65V) provides additional operational flexibility for low-voltage applications.

All three substitutes are qualified for direct replacement based on active product status, compliance certifications, and functional equivalence within the 74LVC06 product family.

Frequently Asked Questions (FAQ)

Q: Can the SN74LVC06APWR be used in applications requiring 5V operation?

A: The SN74LVC06APWR is specified for supply voltages up to 3.6V. Applications requiring 5V operation must use either the 74LVC06AT14-13 or the 74LVC06APW-Q100J, both of which support the full 5.5V upper limit.

Q: Are all substitute parts available in Tape & Reel packaging?

A: The SN74LVC06APWR and 74LVC06AT14-13 are available in Tape & Reel (TR) format. The 74LVC06APW-Q100J is available in Bulk packaging. The packaging format for 74LVC06APW,118 is not specified in the available data.

Q: What is the primary difference in output current capability between substitutes?

A: The 74LVC06AT14-13 and 74LVC06APW-Q100J both specify 32mA output current (low). The SN74LVC06APWR specifies 24mA output current (low), which is 8mA lower. Applications with high current output requirements should use parts rated for 32mA.

Q: Are all substitutes RoHS3 compliant?

A: The 74LVC06AT14-13 and SN74LVC06APWR are explicitly specified as ROHS3 compliant. RoHS compliance status for 74LVC06APW,118 and 74LVC06APW-Q100J is not provided in the available data.

Q: Can substitutes be used interchangeably in existing designs?

A: All substitute parts share the identical 14-TSSOP package geometry (0.173", 4.40mm Width) and surface mount configuration, enabling direct PCB footprint compatibility. Electrical parameter differences, particularly supply voltage range and output current specifications, must be verified against application requirements before substitution.

Q: What is the moisture sensitivity level for all parts?

A: The 74LVC06AT14-13, SN74LVC06APWR, and 74LVC06APW,118 are all rated MSL 1 (Unlimited). Moisture sensitivity level for 74LVC06APW-Q100J is not specified in the available data.

Q: Which substitute offers the broadest voltage operation range?

A: The 74LVC06APW-Q100J supports the widest supply voltage range at 1.2V to 5.5V, compared to the primary part's 1.65V to 5.5V specification. This provides an additional 0.45V of lower voltage operational capability.