74HCT04T14-13 Equivalent & Substitute Parts

Part Overview

The 74HCT04T14-13 is a 6-channel inverter logic IC manufactured by Diodes Incorporated in 14-TSSOP surface mount packaging. This part is active and widely used in digital logic applications requiring signal inversion. Equivalent and substitute parts from alternative manufacturers are available to support supply chain flexibility, inventory management, and design redundancy while maintaining functional and electrical compatibility.

Substiute Parts

74HCT04T14-13

Diodes IncorporatedIn Stock: 1306074HCT04T14-13 Datasheet

Current PartRFQ

74HCT04T14-13

Diodes IncorporatedIn Stock: 1306074HCT04T14-13 Datasheet

Parametric EquivalentRFQ

74HCT04PW,118

Nexperia USA Inc.In Stock: 745174HCT04PW,118 Datasheet

DirectRFQ

MC74HCT04ADTR2G

onsemiIn Stock: 2189MC74HCT04ADTR2G Datasheet

DirectRFQ

MM74HCT04MTCX

Fairchild SemiconductorIn Stock: 2196MM74HCT04MTCX Datasheet

DirectRFQ

SN74HCT04PWR

Texas InstrumentsIn Stock: 7751SN74HCT04PWR Datasheet

DirectRFQ

CD74HCT04PWR

Texas InstrumentsIn Stock: 2366CD74HCT04PWR Datasheet

MFR RecommendedRFQ

SN74HCT04PW

Texas InstrumentsIn Stock: 3813SN74HCT04PW Datasheet

MFR RecommendedRFQ

SN74HCT04PWT

Texas InstrumentsIn Stock: 1993SN74HCT04PWT Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the 74HCT04T14-13 is determined by the following critical parameters:

• Logic Function: All substitutes must be 6-channel inverter ICs with 1 input per channel
• Supply Voltage Range: All substitutes must operate within 4.5V ~ 5.5V
• Input Logic Levels: All substitutes must maintain 0.8V (Low) and 2V (High) thresholds
• Package: All substitutes must use 14-TSSOP surface mount packaging with identical pin configuration
• Electrical Performance: Output current and propagation delay specifications must be within acceptable operating margins for the application
• Compliance: All substitutes must maintain ROHS3 compliance and MSL 1 rating

The substitute parts listed below meet these criteria across multiple manufacturers including Nexperia USA Inc., onsemi, Fairchild Semiconductor, and Texas Instruments.

Parameter Comparison

Engineering Selection Recommendations

Primary Substitutes (Active Status)

The MC74HCT04ADTR2G from onsemi and CD74HCT04PWR from Texas Instruments are preferred substitutes. Both maintain active product status, ROHS3 compliance, and extended operating temperature ranges (-55°C ~ 125°C). The MC74HCT04ADTR2G offers superior quiescent current performance (1 µA) and faster propagation delay (17ns), while CD74HCT04PWR provides equivalent performance with established Texas Instruments supply chain support.

The 74HCT04PW,118 from Nexperia USA Inc. is a direct functional equivalent with active status, lower quiescent current (2 µA), and faster propagation delay (19ns @ 4.5V) compared to the main part.

Secondary Substitutes (Active Status)

The SN74HCT04PWR from Texas Instruments is active and available in Cut Tape & Digi-Reel packaging. It meets all electrical specifications with 18ns propagation delay at 5.5V and operates across -40°C ~ 85°C.

The MM74HCT04MTCX from Fairchild Semiconductor is active but supplied in Bulk packaging rather than standard tape & reel. Operating temperature range is limited to -40°C ~ 85°C.

Discontinued Parts (Not Recommended for New Designs)

SN74HCT04PW and SN74HCT04PWT are discontinued at DiGi Electronics and should not be selected for new designs, though existing inventory may be available through alternative channels.

Frequently Asked Questions (FAQ)

Q: Can I substitute the 74HCT04T14-13 with any of these parts without circuit modification?

A: Yes. All listed substitutes maintain identical logic function (6-channel inverter), supply voltage range (4.5V ~ 5.5V), input logic levels (0.8V Low, 2V High), and 14-TSSOP package pinout. No circuit modifications are required for electrical compatibility.

Q: What is the difference between the main part and substitutes in terms of performance?

A: The primary differences are quiescent current consumption and propagation delay. The MC74HCT04ADTR2G consumes only 1 µA quiescent current versus 20 µA for the main part, and offers faster propagation delay (17ns). Most other substitutes consume 2 µA quiescent current. These differences are beneficial for power-sensitive applications but do not affect functional compatibility.

Q: Does packaging type affect substitutability?

A: Packaging type (Tape & Reel, Cut Tape, Bulk, Tube) affects handling and storage but not electrical compatibility. All parts use the same 14-TSSOP surface mount package. Select based on your procurement and assembly process requirements.

Q: Are all substitutes ROHS3 compliant?

A: All active substitutes listed are ROHS3 compliant. The MM74HCT04MTCX does not specify RoHS status in the provided data but maintains the same material composition as other 74HCT04 variants.

Q: Which substitute offers the widest operating temperature range?

A: Both MC74HCT04ADTR2G and CD74HCT04PWR operate across -55°C ~ 125°C, providing the widest temperature range. The main part operates -40°C ~ 125°C.

Q: Can I use discontinued parts like SN74HCT04PW for new designs?

A: No. Discontinued parts should not be selected for new designs due to uncertain long-term availability. Use only active status parts: 74HCT04PW,118, MC74HCT04ADTR2G, SN74HCT04PWR, CD74HCT04PWR, or MM74HCT04MTCX.