74HC4053N,652 Equivalent & Substitute Parts

Part Overview

The 74HC4053N,652 is a 3-circuit SPDT (Single Pole Double Throw) analog switch IC manufactured by NXP USA Inc. in a 16-DIP through-hole package. This component functions as a 2:1 multiplexer/demultiplexer with 120Ohm on-state resistance and operates across a wide supply voltage range of 2V to 10V (single supply) or ±1.5V to 5V (dual supply).

The product is currently listed as Obsolete, making equivalent and substitute parts necessary for ongoing design support, maintenance, and new production runs. Substitute parts must maintain functional compatibility while accommodating variations in electrical performance and packaging options.

Substiute Parts

74HC4053N,652

NXP USA Inc.In Stock: 104874HC4053N,652 Datasheet

Current PartRFQ

CD74HC4053E

Texas InstrumentsIn Stock: 17708CD74HC4053E Datasheet

DirectRFQ

74HC4053D,653

Nexperia USA Inc.In Stock: 291074HC4053D,653 Datasheet

MFR RecommendedRFQ

CD4053BE

Texas InstrumentsIn Stock: 50417CD4053BE Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 74HC4053N,652 is determined by the following critical parameters:

Functional Requirements (Non-Negotiable):

• Switch circuit type: SPDT
• Multiplexer/demultiplexer configuration: 2:1
• Number of circuits: 3
• Base product number: 74HC4053 or CD4053 family

Electrical Compatibility Criteria:

• On-state resistance must not exceed the application's maximum allowable value
• Supply voltage range must encompass the design's operating voltage
• Operating temperature range must cover the intended application environment
• Leakage current specifications must meet system requirements

Package Compatibility:

• Through-hole DIP packages (16-DIP or 16-PDIP) are directly interchangeable
• Surface-mount packages (16-SO, 16-SOIC) require PCB redesign and are considered alternative form factors

Substitute parts are grouped into two categories: direct pin-compatible replacements (DIP packages) and functionally equivalent alternatives with different package types (surface mount).

Parameter Comparison

Engineering Selection Recommendations

Primary Substitute (Direct Replacement): The 74HC4053D,653 (Nexperia) is the recommended primary substitute for through-hole applications. It maintains identical electrical specifications (120Ohm on-state resistance, 170MHz bandwidth, 31ns/29ns switch times) and operates across the same supply voltage range (2V ~ 10V single, ±1.5V ~ 5V dual). The part is currently Active in production status, ensuring long-term availability. Both parts are ROHS3 compliant with identical leakage current and crosstalk performance. The only difference is the package form factor: 16-SOIC surface mount versus 16-DIP through hole, which requires PCB redesign for the Nexperia part.

Secondary Substitute (DIP Package, Acceptable Performance Variation): The CD74HC4053E (Texas Instruments) is a viable substitute for through-hole DIP applications where slightly higher on-state resistance (130Ohm maximum versus 120Ohm) is acceptable. This part offers superior -3dB bandwidth (200MHz versus 170MHz) and extended operating temperature range (-55°C to 125°C). However, the supply voltage range is more restricted (2V ~ 6V single supply versus 2V ~ 10V), which may limit applicability in designs requiring higher supply voltages. Product status is Last Time Buy, indicating limited future availability.

Alternative Substitute (Extended Supply Voltage Range): The CD4053BE (Texas Instruments) supports the widest supply voltage range (3V ~ 20V single, ±2.5V ~ 9V dual) and is currently Active in production. However, the on-state resistance is significantly higher at 240Ohm maximum, and the -3dB bandwidth is substantially reduced to 30MHz. This part is suitable only for low-frequency switching applications where the higher resistance and reduced bandwidth do not impact performance. The crosstalk specification is also degraded (-40dB @ 6MHz versus -60dB @ 1MHz).

Compliance & Certification: All substitute parts maintain ROHS3 compliance and REACH Unaffected status, matching the original part's regulatory requirements. Selection should prioritize parts with Active production status for long-term supply chain stability.

Frequently Asked Questions (FAQ)

Q: Can I use the CD74HC4053E as a direct replacement for the 74HC4053N,652?

A: Yes, the CD74HC4053E is pin-compatible and functionally equivalent for most applications. Both parts use 16-DIP through-hole packages and maintain the same SPDT 2:1 multiplexer configuration with 3 circuits. The on-state resistance difference (130Ohm versus 120Ohm) is typically acceptable in analog switching applications. However, verify that your design's supply voltage does not exceed 6V, as the CD74HC4053E has a more restricted upper limit than the original part.

Q: What is the key difference between the 74HC4053D,653 and the 74HC4053N,652?

A: The primary difference is the package type: the 74HC4053D,653 uses a 16-SOIC surface-mount package, while the 74HC4053N,652 uses a 16-DIP through-hole package. Electrically, both parts are identical with 120Ohm on-state resistance, 170MHz bandwidth, and identical supply voltage ranges. The 74HC4053D,653 is currently Active in production, making it the preferred long-term substitute if PCB redesign is feasible.

Q: Why does the CD4053BE have such different electrical specifications?

A: The CD4053BE is from the CD4053 family, which uses CMOS technology optimized for extended supply voltage operation (up to 20V). This design approach results in higher on-state resistance (240Ohm) and reduced bandwidth (30MHz) compared to the 74HC4053 family, which is optimized for lower supply voltages and higher-speed switching. The CD4053BE is suitable for low-frequency analog switching applications but not for high-speed signal routing.

Q: Are all these parts RoHS compliant?

A: Yes, all substitute parts listed are ROHS3 compliant and REACH Unaffected, matching the regulatory status of the original 74HC4053N,652. This ensures compatibility with modern manufacturing and environmental standards.

Q: Which substitute should I choose for a new design?

A: For new designs, select the 74HC4053D,653 (Nexperia) if surface-mount assembly is available, as it offers identical electrical performance and Active production status. If through-hole assembly is required, the CD74HC4053E (Texas Instruments) is the preferred choice, provided your design operates within the 2V ~ 6V supply voltage range. Verify bandwidth and on-state resistance requirements against your specific application before final selection.

Q: What happens if my application requires the full 2V ~ 10V supply voltage range?

A: The CD74HC4053E is limited to 2V ~ 6V single supply operation. For applications requiring the full 2V ~ 10V range, use either the 74HC4053D,653 (surface mount) or the original 74HC4053N,652 if available. The CD4053BE supports higher voltages (3V ~ 20V) but with significantly degraded switching performance.