Request Quote
(Ships tomorrow)
74HC4053D,652 Equivalent & Substitute Parts
Part Overview
The 74HC4053D,652 is a 3-circuit SPDT (Single Pole Double Throw) analog switch IC manufactured by Nexperia USA Inc. in a 16-SOIC package. This device functions as a 2:1 multiplexer/demultiplexer with 120Ohm on-state resistance, designed for signal routing and switching applications across industrial and commercial systems. The part is currently obsolete, making equivalent substitutes necessary for ongoing production and maintenance applications.
Substiute Parts
Key Parameters
| Parameter | Value |
|---|---|
| Manufacturer Part Number | 74HC4053D,652 |
| Manufacturer | Nexperia USA Inc. |
| Switch Circuit Type | SPDT |
| Number of Circuits | 3 |
| Multiplexer/Demultiplexer Configuration | 2:1 |
| On-State Resistance (Max) | 120Ohm |
| Channel-to-Channel Matching (ΔRon) | 6Ohm |
| Voltage - Supply, Single (V+) | 2V ~ 10V |
| Voltage - Supply, Dual (V±) | ±1.5V ~ 5V |
| Switch Time (Ton, Toff) (Max) | 31ns, 29ns |
| -3dB Bandwidth | 170MHz |
| Channel Capacitance (CS(off), CD(off)) | 4.6pF |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Crosstalk | -60dB @ 1MHz |
| Operating Temperature | -40°C ~ 125°C (TA) |
| Package / Case | 16-SOIC (0.154", 3.90mm Width) |
| Mounting Type | Surface Mount |
| Product Status | Obsolete |
| RoHS Status | ROHS3 Compliant |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
Substitute Part Grouping Explanation
Substitution for the 74HC4053D,652 is determined by the following critical parameters:
Primary Substitution Criteria:
- Switch circuit type: SPDT
- Number of circuits: 3
- Multiplexer/demultiplexer configuration: 2:1
- Package type: 16-SOIC (0.154", 3.90mm Width)
- Mounting type: Surface Mount
- Operating temperature range: Minimum -40°C to 125°C
- Supply voltage compatibility: Overlapping ranges with original specification
Secondary Compatibility Factors:
- On-state resistance (120Ohm nominal, with tolerance variations acceptable)
- Leakage current specification (100nA maximum)
- Crosstalk performance (-60dB @ 1MHz or better)
- RoHS3 compliance and MSL rating
Substitute parts are grouped into two categories:
Category A - Direct Nexperia Variants: 74HC4053D,653 shares identical electrical specifications and differs only in packaging format (Digi-Reel vs. standard packaging). This part maintains full pin-for-pin compatibility.
Category B - Cross-Manufacturer Substitutes: Parts from onsemi (MC74HC4053ADR2G), Texas Instruments (CD4053 series), and other manufacturers provide functional equivalence with variations in on-state resistance (100Ohm to 240Ohm range), bandwidth performance (30MHz to 200MHz), and supply voltage ranges. These parts maintain the core 3-circuit SPDT 2:1 multiplexer architecture and 16-SOIC package footprint.
Parameter Comparison
| Part Number | Manufacturer | On-State Resistance (Max) | Voltage - Supply, Single (V+) | Voltage - Supply, Dual (V±) | -3dB Bandwidth | Operating Temperature | Product Status | Package |
|---|---|---|---|---|---|---|---|---|
| 74HC4053D,652 | Nexperia USA Inc. | 120Ohm | 2V ~ 10V | ±1.5V ~ 5V | 170MHz | -40°C ~ 125°C | Obsolete | 16-SOIC (0.154") |
| 74HC4053D,653 | Nexperia USA Inc. | 120Ohm | 2V ~ 10V | ±1.5V ~ 5V | 170MHz | -40°C ~ 125°C | Active | 16-SOIC (0.154") |
| MC74HC4053ADR2G | onsemi | 100Ohm | 2V ~ 6V | ±2V ~ 6V | 120MHz | -55°C ~ 125°C | Active | 16-SOIC (0.154") |
| CD4053BM | Texas Instruments | 240Ohm | 3V ~ 20V | ±2.5V ~ 9V | 30MHz | -55°C ~ 125°C | Last Time Buy | 16-SOIC (0.154") |
| CD4053BM96 | Texas Instruments | 240Ohm | 3V ~ 20V | ±2.5V ~ 9V | 30MHz | -55°C ~ 125°C | Active | 16-SOIC (0.154") |
| CD4053BM96G4 | Texas Instruments | 240Ohm | 3V ~ 20V | ±2.5V ~ 9V | 30MHz | -55°C ~ 125°C | Obsolete | 16-SOIC (0.154") |
| CD4053BMT | Texas Instruments | 240Ohm | 3V ~ 20V | ±2.5V ~ 9V | 30MHz | -55°C ~ 125°C | Last Time Buy | 16-SOIC (0.154") |
| CD4053BNSR | Texas Instruments | 240Ohm | 3V ~ 20V | ±2.5V ~ 9V | 30MHz | -55°C ~ 125°C | Active | 16-SO (0.209") |
| CD4053BQM96Q1 | Texas Instruments | 240Ohm | 3V ~ 20V | ±2.5V ~ 9V | 30MHz | -40°C ~ 125°C | Last Time Buy | 16-SOIC (0.154") |
| CD74HC4053M | Texas Instruments | 130Ohm | 2V ~ 6V | ±1V ~ 5V | 200MHz | -55°C ~ 125°C | Last Time Buy | 16-SOIC (0.154") |
| CD74HC4053M96 | Texas Instruments | 130Ohm | 2V ~ 6V | ±1V ~ 5V | 200MHz | -55°C ~ 125°C | Active | 16-SOIC (0.154") |
Engineering Selection Recommendations
Recommended Primary Substitute: 74HC4053D,653 (Nexperia USA Inc.)
This part provides identical electrical and mechanical specifications to the original 74HC4053D,652. The only difference is packaging format (Digi-Reel vs. standard). Both parts are ROHS3 compliant with MSL 1 rating. The 74HC4053D,653 is currently in Active product status, ensuring long-term availability and supply chain stability.
Recommended Secondary Substitutes (Active Status):
-
CD74HC4053M96 (Texas Instruments) - Active status with 130Ohm on-state resistance, 200MHz bandwidth, and -55°C to 125°C operating range. Suitable for applications requiring lower on-state resistance and higher bandwidth than CD4053 variants.
-
CD4053BM96 (Texas Instruments) - Active status with 240Ohm on-state resistance and extended supply voltage range (3V ~ 20V single supply). Appropriate for low-frequency switching applications and systems with higher supply voltages.
-
MC74HC4053ADR2G (onsemi) - Active status with 100Ohm on-state resistance and -55°C to 125°C operating range. Suitable for applications requiring lower on-state resistance than the original specification.
Substitutes to Avoid for New Designs:
Parts with Last Time Buy or Obsolete status (CD4053BM, CD4053BMT, CD4053BM96G4, CD74HC4053M, CD4053BQM96Q1) should not be selected for new production designs. These parts have limited remaining inventory and no guaranteed future availability.
Package Consideration:
CD4053BNSR uses a 16-SO package (0.209", 5.30mm Width) instead of the standard 16-SOIC (0.154", 3.90mm Width). This part is not recommended as a direct substitute due to different PCB footprint requirements.
Frequently Asked Questions (FAQ)
Q: Can I use CD4053BM96 as a direct replacement for 74HC4053D,652?
A: CD4053BM96 is functionally compatible but not a direct pin-for-pin replacement. The on-state resistance is 240Ohm (versus 120Ohm), and the -3dB bandwidth is 30MHz (versus 170MHz). It is suitable only for applications where lower bandwidth and higher on-state resistance are acceptable. The 16-SOIC package footprint is identical.
Q: What is the difference between 74HC4053D,652 and 74HC4053D,653?
A: Both parts are electrically and mechanically identical. The difference is in packaging format: 74HC4053D,652 uses standard packaging while 74HC4053D,653 uses Digi-Reel format. The 74HC4053D,653 is currently Active, making it the preferred choice for new applications.
Q: Why do some substitutes have different on-state resistance values?
A: Different manufacturers and product lines optimize for different performance characteristics. Lower on-state resistance (100Ohm) reduces signal attenuation but may increase power consumption. Higher on-state resistance (240Ohm) reduces power consumption but increases signal loss. Selection depends on application requirements.
Q: Is CD4053BNSR compatible with 74HC4053D,652?
A: CD4053BNSR has identical electrical specifications but uses a 16-SO package (0.209" width) instead of 16-SOIC (0.154" width). The PCB footprint is different, requiring layout modifications. It is not recommended as a direct substitute without PCB redesign.
Q: What does "Last Time Buy" status mean for substitute parts?
A: Last Time Buy indicates the manufacturer has announced end-of-life for that part number. Remaining inventory is limited, and no future production is planned. These parts should not be selected for new designs requiring long-term production support.
Q: Are all substitute parts ROHS3 compliant?
A: Yes, all listed substitute parts are ROHS3 compliant with MSL 1 (Unlimited) rating, matching the original 74HC4053D,652 compliance status.
Q: Can I use MC74HC4053ADR2G in a 10V single supply application?
A: No. MC74HC4053ADR2G supports only 2V ~ 6V single supply voltage, while the original 74HC4053D,652 supports 2V ~ 10V. Applications requiring 10V operation must use 74HC4053D,653 or equivalent parts with extended voltage range.
Q: What is the difference between CD74HC4053M and CD74HC4053M96?
A: Both parts have identical electrical specifications (130Ohm on-state resistance, 200MHz bandwidth). CD74HC4053M is in Last Time Buy status with limited inventory, while CD74HC4053M96 is Active. CD74HC4053M96 is recommended for new designs.
Alternative Parts
SJ6012L2TP
Littelfuse Inc.
6 Alternative Parts
JMK107BBJ476MA-RE
Taiyo Yuden
10 Alternative Parts
GMK107BBJ475MA-T
Taiyo Yuden
5 Alternative Parts
SJ6020N2ARP
Littelfuse Inc.
3 Alternative Parts
SJ6025R2ATP
Littelfuse Inc.
4 Alternative Parts
2474-05L
API Delevan Inc.
1 Alternative Parts
4590R-684K
API Delevan Inc.
1 Alternative Parts
CM6560R-334
API Delevan Inc.
1 Alternative Parts
CM6460-104
API Delevan Inc.
1 Alternative Parts
5526-12
API Delevan Inc.
1 Alternative Parts