Request Quote
(Ships tomorrow)
74HC4052PW,112 Equivalent & Substitute Parts
Part Overview
The 74HC4052PW,112 is a 2-circuit IC switch with 4:1 multiplexer/demultiplexer configuration manufactured by Nexperia USA Inc. This interface component features SP4T switching architecture with 150Ohm on-state resistance and operates across supply voltages of 2V to 10V (single supply) or ±1.5V to 5V (dual supply). The device is housed in a 16-TSSOP package and is ROHS3 compliant with MSL 1 rating.
The product status is listed as Obsolete, making equivalent and substitute parts necessary for ongoing design support and procurement. Alternative parts must maintain functional compatibility while meeting the same electrical and mechanical specifications within acceptable tolerances.
Substiute Parts
Key Parameters
| Parameter | Value |
|---|---|
| Switch Circuit Configuration | SP4T |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Number of Circuits | 2 |
| On-State Resistance (Max) | 150Ohm |
| Channel-to-Channel Matching (ΔRon) | 6Ohm |
| Voltage - Supply, Single (V+) | 2V ~ 10V |
| Voltage - Supply, Dual (V±) | ±1.5V ~ 5V |
| Switch Time (Ton, Toff) (Max) | 58ns, 48ns |
| -3dB Bandwidth | 180MHz |
| Channel Capacitance (CS(off), CD(off)) | 4.6pF |
| Current - Leakage (IS(off)) (Max) | 2µA |
| Crosstalk | -60dB @ 1MHz |
| Operating Temperature | -40°C ~ 125°C (TA) |
| Package / Case | 16-TSSOP (0.173", 4.40mm Width) |
| RoHS Status | ROHS3 Compliant |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
Substitute Part Grouping Explanation
Substitution eligibility for the 74HC4052PW,112 is determined by the following critical parameters:
Functional Requirements:
- Switch circuit configuration must be SP4T
- Multiplexer/demultiplexer circuit must be 4:1
- Number of circuits must be 2
Electrical Compatibility:
- On-state resistance must not exceed 150Ohm (higher resistance values are acceptable for lower-speed applications but may impact signal integrity)
- Supply voltage ranges must overlap with or exceed the original specification (2V ~ 10V single supply minimum)
- Operating temperature range must cover -40°C to 125°C minimum
- Package must be 16-TSSOP with 0.173" width and 4.40mm dimensions
Compliance Requirements:
- ROHS3 compliance mandatory
- MSL rating of 1 required
Substitute parts are grouped into three categories based on on-state resistance characteristics: low-resistance variants (100Ohm), mid-range variants (130Ohm), and higher-resistance variants (160Ohm, 240Ohm). Each category maintains the core SP4T 4:1 2-circuit architecture while offering different performance trade-offs in switching speed and bandwidth.
Parameter Comparison
| Part Number | Manufacturer | On-State Resistance (Max) | Supply Voltage Single (V+) | Supply Voltage Dual (V±) | -3dB Bandwidth | Operating Temperature | Product Status | Package |
|---|---|---|---|---|---|---|---|---|
| 74HC4052PW,112 | Nexperia USA Inc. | 150Ohm | 2V ~ 10V | ±1.5V ~ 5V | 180MHz | -40°C ~ 125°C | Obsolete | 16-TSSOP |
| CD74HC4052PWR | Texas Instruments | 130Ohm | 2V ~ 6V | ±1V ~ 5V | 185MHz | -55°C ~ 125°C | Active | 16-TSSOP |
| CD74HC4052PW | Texas Instruments | 130Ohm | 2V ~ 6V | ±1V ~ 5V | 185MHz | -55°C ~ 125°C | Last Time Buy | 16-TSSOP |
| CD74HC4052PWT | Texas Instruments | 130Ohm | 2V ~ 6V | ±1V ~ 5V | 185MHz | -55°C ~ 125°C | Last Time Buy | 16-TSSOP |
| CD74HC4052PWRG4 | Texas Instruments | 130Ohm | 2V ~ 6V | ±1V ~ 5V | 185MHz | -55°C ~ 125°C | Obsolete | 16-TSSOP |
| MC74HC4052ADTR2G | onsemi | 100Ohm | 2V ~ 6V | ±2V ~ 6V | 95MHz | -55°C ~ 125°C | Active | 16-TSSOP |
| MC74HC4052ADTG | onsemi | 100Ohm | 2V ~ 6V | ±2V ~ 6V | 95MHz | -55°C ~ 125°C | Obsolete | 16-TSSOP |
| CD4052BPWR | Texas Instruments | 240Ohm | 3V ~ 20V | ±2.5V ~ 9V | 25MHz | -55°C ~ 125°C | Active | 16-TSSOP |
| CD4052BPW | Texas Instruments | 240Ohm | 3V ~ 20V | ±2.5V ~ 9V | 25MHz | -55°C ~ 125°C | Last Time Buy | 16-TSSOP |
| CD4052BPWRG4 | Texas Instruments | 240Ohm | 3V ~ 20V | ±2.5V ~ 9V | 25MHz | -55°C ~ 125°C | Obsolete | 16-TSSOP |
| BU4052BCFV-E2 | Rohm Semiconductor | 160Ohm | 3V ~ 18V | — | — | -40°C ~ 85°C | Active | 16-LSSOP |
Engineering Selection Recommendations
Primary Recommendation: CD74HC4052PWR (Texas Instruments)
The CD74HC4052PWR is the preferred substitute for the 74HC4052PW,112. This part maintains Active product status, ensuring long-term availability and supply chain stability. It features 130Ohm on-state resistance (lower than the original 150Ohm), providing improved signal integrity and reduced power dissipation. The device operates across 2V to 6V single supply and ±1V to 5V dual supply, covering the critical operating range of the original part. Extended operating temperature range (-55°C to 125°C) exceeds the original specification. ROHS3 compliance and MSL 1 rating are maintained. The 16-TSSOP package is identical to the original.
Secondary Recommendation: MC74HC4052ADTR2G (onsemi)
The MC74HC4052ADTR2G offers the lowest on-state resistance at 100Ohm, delivering superior switching performance and bandwidth characteristics (95MHz). This part is Active and provides extended temperature coverage (-55°C to 125°C). However, the single supply voltage range is limited to 2V to 6V, and dual supply is ±2V to 6V, which may not accommodate applications requiring the original 10V single supply capability. This variant is suitable for designs operating within the reduced voltage envelope.
Alternative for High-Voltage Applications: CD4052BPWR (Texas Instruments)
The CD4052BPWR accommodates extended supply voltage ranges (3V to 20V single supply, ±2.5V to 9V dual supply) and is Active. However, the 240Ohm on-state resistance and 25MHz bandwidth represent significant performance trade-offs compared to the original 150Ohm and 180MHz specifications. This part is appropriate only for low-frequency switching applications where bandwidth and resistance characteristics are non-critical.
Not Recommended: BU4052BCFV-E2 (Rohm Semiconductor)
While the BU4052BCFV-E2 is Active and offers 160Ohm resistance, the operating temperature range is limited to -40°C to 85°C, which does not meet the original -40°C to 125°C specification. Additionally, the package is 16-LSSOP rather than 16-TSSOP, requiring PCB layout modifications.
Frequently Asked Questions (FAQ)
Q: Can I use CD74HC4052PWR as a direct replacement for 74HC4052PW,112?
A: Yes. The CD74HC4052PWR is functionally compatible as a direct replacement. Both devices feature identical SP4T 4:1 2-circuit architecture, 16-TSSOP packaging, and ROHS3 compliance. The CD74HC4052PWR offers lower on-state resistance (130Ohm vs. 150Ohm) and extended temperature range (-55°C to 125°C vs. -40°C to 125°C), making it a superior substitute. The reduced supply voltage range (2V to 6V vs. 2V to 10V) must be verified against your application requirements.
Q: What is the difference between the 130Ohm and 240Ohm variants?
A: On-state resistance directly impacts switching speed, bandwidth, and power dissipation. The 130Ohm variants (CD74HC4052 series) provide 185MHz bandwidth and faster switching, suitable for high-frequency signal routing. The 240Ohm variants (CD4052B series) operate at 25MHz bandwidth with reduced switching speed, appropriate for low-frequency multiplexing applications. The 150Ohm original part represents a mid-range performance level between these two categories.
Q: Are all substitute parts available in the same package?
A: Most substitutes use the 16-TSSOP package identical to the original. The exception is BU4052BCFV-E2, which uses 16-LSSOP packaging. While both are 16-pin packages with 0.173" width and 4.40mm dimensions, the LSSOP variant has different pin spacing and requires PCB layout verification before substitution.
Q: What supply voltage range should I verify before substituting?
A: The original 74HC4052PW,112 operates at 2V to 10V single supply. Most substitutes (CD74HC4052 series, MC74HC4052 series) limit single supply to 2V to 6V. If your application requires operation above 6V single supply, only the CD4052B series (3V to 20V) or BU4052BCFV-E2 (3V to 18V) are suitable. Verify your actual operating voltage before part selection.
Q: Why is product status important in selecting a substitute?
A: Product status indicates supply chain availability and manufacturer support. Active parts (CD74HC4052PWR, MC74HC4052ADTR2G, CD4052BPWR, BU4052BCFV-E2) have guaranteed long-term availability. Last Time Buy parts (CD74HC4052PW, CD74HC4052PWT, CD4052BPW) have limited production windows. Obsolete parts (74HC4052PW,112, CD74HC4052PWRG4, MC74HC4052ADTG, CD4052BPWRG4) may have restricted availability. For new designs, Active status is strongly preferred.
Q: Can I use the 100Ohm MC74HC4052ADTR2G if my application requires lower resistance?
A: The MC74HC4052ADTR2G offers the lowest on-state resistance (100Ohm) and superior switching performance. However, verify that your application operates within the restricted supply voltage range (2V to 6V single supply, ±2V to 6V dual supply). If your design requires the original 10V single supply capability, this part is not suitable. The CD74HC4052PWR at 130Ohm provides a better balance of performance and voltage compatibility.
Q: What compliance certifications should I verify?
A: All listed substitute parts maintain ROHS3 compliance and MSL 1 (Unlimited) moisture sensitivity rating, matching the original part. REACH status is Unaffected for all variants. ECCN classification is EAR99 for all parts except CD4052BPWRG4 (EAR99 with HTSUS 8542.39.0060). Verify ECCN and HTSUS codes if your application involves export or restricted-use environments.
Alternative Parts
SJ6012L2TP
Littelfuse Inc.
6 Alternative Parts
JMK107BBJ476MA-RE
Taiyo Yuden
10 Alternative Parts
GMK107BBJ475MA-T
Taiyo Yuden
5 Alternative Parts
SJ6020N2ARP
Littelfuse Inc.
3 Alternative Parts
SJ6025R2ATP
Littelfuse Inc.
4 Alternative Parts
2474-05L
API Delevan Inc.
1 Alternative Parts
4590R-684K
API Delevan Inc.
1 Alternative Parts
CM6560R-334
API Delevan Inc.
1 Alternative Parts
CM6460-104
API Delevan Inc.
1 Alternative Parts
5526-12
API Delevan Inc.
1 Alternative Parts