74HC4052D,652 Equivalent & Substitute Parts

Part Overview

The 74HC4052D,652 is a dual 4:1 analog switch IC manufactured by Nexperia USA Inc., designed for signal routing and multiplexing applications in interface circuits. This component features SP4T (Single Pole 4-Throw) switching configuration with 150Ohm on-state resistance, operating across supply voltages of 2V to 10V (single supply) or ±1.5V to 5V (dual supply). The part is currently classified as Obsolete, necessitating identification of functionally equivalent alternatives for ongoing design support and procurement.

Key Parameters

Parameter	Value
Manufacturer Part Number	74HC4052D,652
Manufacturer	Nexperia USA Inc.
Switch Circuit Configuration	SP4T (Single Pole 4-Throw)
Number of Circuits	2
Multiplexer/Demultiplexer Circuit	4:1
On-State Resistance (Max)	150Ohm
Channel-to-Channel Matching (ΔRon)	6Ohm
Voltage - Supply, Single (V+)	2V ~ 10V
Voltage - Supply, Dual (V±)	±1.5V ~ 5V
Switch Time (Ton, Toff) (Max)	58ns, 48ns
-3dB Bandwidth	180MHz
Channel Capacitance (CS(off), CD(off))	4.6pF
Current - Leakage (IS(off)) (Max)	2µA
Crosstalk	-60dB @ 1MHz
Operating Temperature	-40°C ~ 125°C (TA)
Package / Case	16-SOIC (0.154", 3.90mm Width)
Mounting Type	Surface Mount
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)
REACH Status	REACH Unaffected
Product Status	Obsolete

Substitute Part Grouping Explanation

Substitution eligibility for the 74HC4052D,652 is determined by the following critical parameters:

Primary Substitution Criteria:

Switch circuit configuration: SP4T (Single Pole 4-Throw)
Number of circuits: 2
Multiplexer/Demultiplexer circuit: 4:1
Package type: 16-SOIC with 0.154" (3.90mm) width
Surface mount mounting type
Operating temperature range: minimum -40°C, maximum 125°C
RoHS3 compliance and REACH unaffected status

Secondary Compatibility Parameters:

On-state resistance tolerance: 100Ohm to 240Ohm acceptable for most applications
Supply voltage ranges: must support either 2V-10V single supply or ±1.5V-5V dual supply configurations
Bandwidth and switching speed: 25MHz minimum -3dB bandwidth; switch times up to 58ns acceptable
Leakage current: up to 300nA acceptable
Channel capacitance: 4.6pF to 80pF acceptable

Substitute parts are grouped into two categories: direct equivalents (identical electrical specifications and packaging) and functional equivalents (compatible electrical performance within application tolerance with identical package footprint).

Parameter Comparison

Part Number	Manufacturer	Switch Circuit	Number of Circuits	On-State Resistance (Max)	ΔRon (Max)	V+ Supply	V± Supply	Bandwidth (-3dB)	Leakage (IS(off))	Operating Temp	Package	Product Status
74HC4052D,652	Nexperia USA Inc.	SP4T	2	150Ohm	6Ohm	2V ~ 10V	±1.5V ~ 5V	180MHz	2µA	-40°C ~ 125°C	16-SOIC (3.90mm)	Obsolete
74HC4052D,653	Nexperia USA Inc.	SP4T	2	150Ohm	6Ohm	2V ~ 10V	±1.5V ~ 5V	180MHz	2µA	-40°C ~ 125°C	16-SOIC (3.90mm)	Active
MC74HC4052ADR2G	onsemi	SP4T	2	100Ohm	10Ohm	2V ~ 6V	±2V ~ 6V	95MHz	100nA	-55°C ~ 125°C	16-SOIC (3.90mm)	Active
BU4052BCF-E2	Rohm Semiconductor	SP4T	2	160Ohm	—	3V ~ 18V	—	—	300nA	-40°C ~ 85°C	16-SOIC (4.40mm)	Active
CD4052BM96	Texas Instruments	SP4T	2	240Ohm	5Ohm	3V ~ 20V	±2.5V ~ 9V	25MHz	100nA	-55°C ~ 125°C	16-SOIC (3.90mm)	Active
CD4052BMT	Texas Instruments	SP4T	2	240Ohm	5Ohm	3V ~ 20V	±2.5V ~ 9V	25MHz	100nA	-55°C ~ 125°C	16-SOIC (3.90mm)	Last Time Buy
CD74HC4052M96	Texas Instruments	SP4T	2	130Ohm	5Ohm	2V ~ 6V	±1V ~ 5V	185MHz	200nA	-55°C ~ 125°C	16-SOIC (3.90mm)	Active
CD74HC4052MT	Texas Instruments	SP4T	2	130Ohm	5Ohm	2V ~ 6V	±1V ~ 5V	185MHz	200nA	-55°C ~ 125°C	16-SOIC (3.90mm)	Last Time Buy

Engineering Selection Recommendations

Direct Equivalent (Recommended Primary Substitute):

The 74HC4052D,653 from Nexperia USA Inc. is the direct equivalent replacement. It maintains identical electrical specifications (150Ohm on-state resistance, 6Ohm channel matching, 180MHz bandwidth, 2µA leakage) and package configuration (16-SOIC, 3.90mm width). The primary distinction is product status: 74HC4052D,653 is Active with 78,875 units in stock, compared to the Obsolete status of 74HC4052D,652. This part provides seamless design continuity with no circuit modifications required.

Active Functional Equivalents (Alternative Substitutes):

For applications where supply voltage flexibility or extended temperature range is beneficial:

CD74HC4052M96 / CD74HC4052MT (Texas Instruments): These parts offer 130Ohm on-state resistance with 185MHz bandwidth, closely matching the original 150Ohm/180MHz specification. Extended operating temperature to -55°C provides additional margin. Both maintain 16-SOIC (3.90mm) package compatibility. CD74HC4052M96 is Active; CD74HC4052MT is Last Time Buy.
MC74HC4052ADR2G (onsemi): Provides 100Ohm on-state resistance with lower leakage (100nA vs. 2µA), suitable for low-power applications. Bandwidth reduced to 95MHz. Supply voltage range limited to 2V-6V single supply. Maintains 16-SOIC (3.90mm) package.
CD4052BM96 / CD4052BMT (Texas Instruments): Offer 240Ohm on-state resistance with extended supply voltage range (3V-20V single, ±2.5V-9V dual). Reduced bandwidth (25MHz) and lower leakage (100nA). Both maintain 16-SOIC (3.90mm) package. CD4052BM96 is Active; CD4052BMT is Last Time Buy.

Not Recommended:

BU4052BCF-E2 (Rohm Semiconductor) features a different package width (4.40mm vs. 3.90mm), creating potential PCB layout incompatibility. Operating temperature maximum of 85°C is below the original specification. This part is suitable only for new designs with layout accommodation.

All recommended substitutes maintain ROHS3 compliance and REACH unaffected status, ensuring regulatory continuity.

Frequently Asked Questions (FAQ)

Q: Can I use 74HC4052D,653 as a direct replacement for 74HC4052D,652 without circuit modifications?

A: Yes. The 74HC4052D,653 is electrically and mechanically identical to 74HC4052D,652. No schematic or PCB changes are required. The only difference is product status (Active vs. Obsolete).

Q: What is the primary reason to substitute the 74HC4052D,652?

A: The 74HC4052D,652 is classified as Obsolete. Nexperia USA Inc. no longer manufactures this variant. The 74HC4052D,653 (Active status, Tape & Reel packaging) is the direct replacement with identical specifications and 78,875 units currently in stock.

Q: Are there performance differences between the 74HC4052D,652 and CD74HC4052M96?

A: Both parts maintain similar performance within application tolerance. CD74HC4052M96 offers slightly lower on-state resistance (130Ohm vs. 150Ohm) and comparable bandwidth (185MHz vs. 180MHz). The primary advantage is extended operating temperature range (-55°C vs. -40°C minimum). Both use identical 16-SOIC (3.90mm) package footprint.

Q: Can I use CD4052BM96 if my application requires lower leakage current?

A: CD4052BM96 provides 100nA leakage versus 2µA in the original part, making it suitable for low-power applications. However, on-state resistance increases to 240Ohm (vs. 150Ohm), and bandwidth reduces to 25MHz (vs. 180MHz). Verify that your signal routing application tolerates these trade-offs before substitution.

Q: What is the difference between CD4052BMT and CD4052BM96?

A: Both parts are electrically identical (240Ohm resistance, 25MHz bandwidth, 100nA leakage). The difference is packaging: CD4052BM96 is supplied in Cut Tape (CT) & Digi-Reel format; CD4052BMT is supplied in Tape & Reel (TR) format. CD4052BM96 is Active; CD4052BMT is Last Time Buy.

Q: Why does BU4052BCF-E2 have a different package width (4.40mm vs. 3.90mm)?

A: BU4052BCF-E2 uses a 16-SOP package variant with 4.40mm width, compared to the standard 16-SOIC (3.90mm) used by other substitutes. This creates different PCB footprint requirements. BU4052BCF-E2 is suitable only for new designs where layout can accommodate the wider package. Existing PCB designs require parts with 3.90mm package width.

Q: Which substitute offers the best balance of performance and availability?

A: The 74HC4052D,653 is the optimal choice for direct replacement, offering identical specifications with Active status and highest inventory (78,875 units). For new designs requiring extended temperature range or alternative performance characteristics, CD74HC4052M96 provides excellent balance with 185MHz bandwidth, 130Ohm resistance, and -55°C minimum operating temperature.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. All substitute parts listed maintain ROHS3 compliance and REACH unaffected status, ensuring regulatory continuity with the original 74HC4052D,652.

Q: What supply voltage range should I verify before substitution?

A: The original 74HC4052D,652 operates at 2V-10V (single supply) or ±1.5V-5V (dual supply). Verify your circuit's supply voltage against each substitute's specification. MC74HC4052ADR2G limits single supply to 2V-6V. CD4052BM96 extends to 3V-20V single supply. Confirm compatibility before design implementation.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message