74HC2G16GWH Equivalent & Substitute Parts

Part Overview

The 74HC2G16GWH is a non-inverting buffer logic integrated circuit manufactured by Nexperia USA Inc. This device functions as a 2-element buffer with 1 bit per element and push-pull output configuration, designed for 6V logic applications. The part is classified as Active product status with full RoHS3 compliance and unlimited moisture sensitivity rating. Substitute parts are identified when equivalent electrical performance and mechanical compatibility are maintained across the specified parameter range.

Substiute Parts

74HC2G16GWH

Nexperia USA Inc.In Stock: 95774HC2G16GWH Datasheet

Current PartRFQ

74HC2G34GW,125

Nexperia USA Inc.In Stock: 2312674HC2G34GW,125 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the 74HC2G16GWH are identified based on strict equivalence across the following critical parameters:

• Logic Type: Buffer, Non-Inverting
• Number of Elements: 2
• Number of Bits per Element: 1
• Output Type: Push-Pull
• Current - Output High, Low: 5.2mA, 5.2mA
• Voltage - Supply: 2V ~ 6V
• Operating Temperature: -40°C ~ 125°C (TA)
• Package / Case: 6-TSSOP, SC-88, SOT-363
• Mounting Type: Surface Mount
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level (MSL): 1 (Unlimited)

The 74HC2G34GW,125 meets all specified electrical and mechanical parameters, confirming functional and physical interchangeability within the defined operating envelope.

Parameter Comparison

Engineering Selection Recommendations

Both the 74HC2G16GWH and 74HC2G34GW,125 maintain Active product status from Nexperia USA Inc., ensuring continued manufacturing support and supply chain availability. Both parts carry ROHS3 compliance and identical moisture sensitivity ratings, meeting regulatory and environmental requirements for industrial and commercial applications. The electrical specifications, including supply voltage range, output current capabilities, and operating temperature envelope, are identical across both devices. The 6-TSSOP surface mount package provides equivalent PCB footprint compatibility. Selection between these parts may be based on inventory availability or supplier preference, as no electrical or mechanical differentiation exists within the specified parameters.

Frequently Asked Questions (FAQ)

Q: Can the 74HC2G34GW,125 be used as a direct replacement for the 74HC2G16GWH?

A: Yes. Both parts are electrically and mechanically equivalent across all specified parameters, including logic function, output characteristics, supply voltage range, operating temperature, and package configuration.

Q: Are there any differences in the 6-TSSOP package between these parts?

A: No. Both parts use the identical 6-TSSOP (SC-88, SOT-363) surface mount package with the same pin configuration and PCB footprint requirements.

Q: Do both parts meet the same compliance standards?

A: Yes. Both the 74HC2G16GWH and 74HC2G34GW,125 are ROHS3 compliant with MSL 1 (Unlimited) moisture sensitivity rating and REACH Unaffected status.

Q: What is the output current capability for both parts?

A: Both parts provide 5.2mA output current for both high and low logic states, enabling equivalent drive capability for connected logic circuits.

Q: Are there any temperature or voltage operating differences?

A: No. Both parts operate across the identical -40°C to 125°C temperature range and 2V to 6V supply voltage range.