74HC153D,652 Equivalent & Substitute Parts

Part Overview

The 74HC153D,652 is a 2 x 4:1 multiplexer logic integrated circuit manufactured by Nexperia USA Inc. in a 16-SOIC surface mount package. This part is classified as obsolete, making equivalent and substitute parts necessary for ongoing design support and procurement continuity. The 74HC153 series provides dual 4-to-1 multiplexing functionality suitable for data selection and routing applications in digital logic circuits.

Substiute Parts

74HC153D,652

Nexperia USA Inc.In Stock: 113974HC153D,652 Datasheet

Current PartRFQ

MC74HC153ADR2G

onsemiIn Stock: 2829MC74HC153ADR2G Datasheet

DirectRFQ

CD74HC153M

Harris CorporationIn Stock: 15135CD74HC153M Datasheet

UpgradeRFQ

CD74HC153M96

Texas InstrumentsIn Stock: 2897CD74HC153M96 Datasheet

UpgradeRFQ

CD74HC153MT

Texas InstrumentsIn Stock: 771CD74HC153MT Datasheet

UpgradeRFQ

SN74HC153D

Texas InstrumentsIn Stock: 1130SN74HC153D Datasheet

SimilarRFQ

SN74HC153DR

Texas InstrumentsIn Stock: 2673SN74HC153DR Datasheet

SimilarRFQ

SN74HC153DT

Texas InstrumentsIn Stock: 727SN74HC153DT Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the 74HC153D,652 is determined by the following critical parameters:

Functional Equivalence: All substitute parts must implement the same 2 x 4:1 multiplexer circuit with identical pin configuration and logic operation.

Package Compatibility: All parts must use the 16-SOIC (0.154", 3.90mm Width) surface mount package to ensure PCB compatibility without layout modifications.

Electrical Parameters: Voltage supply range (2V ~ 6V) and output current ratings determine functional interchangeability. Parts with identical or superior electrical specifications are direct substitutes.

Operating Temperature Range: The original part operates from -40°C to 125°C. Substitute parts with equal or extended temperature ranges maintain full compatibility.

Compliance Requirements: RoHS3 compliance is required for modern procurement. Parts meeting this standard are preferred for new designs and long-term availability.

Substitute parts are categorized as Direct (identical electrical and package specifications), Upgrade (enhanced specifications or active product status), or Similar (minor parameter variations requiring application verification).

Parameter Comparison

Engineering Selection Recommendations

Direct Substitutes (Preferred for New Designs):

MC74HC153ADR2G (onsemi) and CD74HC153M96 (Texas Instruments) are the primary recommended substitutes. Both parts maintain identical electrical specifications to the original 74HC153D,652 with 5.2mA output current ratings and 2V to 6V supply voltage compatibility. Both manufacturers offer active product status with ROHS3 compliance, ensuring long-term availability and regulatory compliance for modern applications. MC74HC153ADR2G provides extended operating temperature range (-55°C to 125°C) compared to the original part's -40°C to 125°C specification.

Alternative Substitutes (Limited Application Scope):

SN74HC153DR (Texas Instruments) is an active product with ROHS3 compliance but features higher output current specifications (7.8mA versus 5.2mA) and a narrower operating temperature range (-40°C to 85°C). This part is suitable for applications where the higher output current does not create design conflicts and where the reduced upper temperature limit is acceptable.

Obsolete Alternatives (Not Recommended for New Designs):

CD74HC153M (Harris Corporation) and CD74HC153MT (Texas Instruments) are discontinued or obsolete products. CD74HC153M additionally lacks RoHS3 compliance. These parts should only be considered for legacy system maintenance where exact part matching is required and new procurement is unavoidable.

Frequently Asked Questions (FAQ)

Q: Can I use MC74HC153ADR2G as a direct replacement for 74HC153D,652?

A: Yes. MC74HC153ADR2G is a direct functional equivalent with identical 2 x 4:1 multiplexer circuit, 16-SOIC package, and electrical specifications (5.2mA output current, 2V to 6V supply voltage). The extended operating temperature range (-55°C to 125°C) provides additional margin. Both parts are ROHS3 compliant.

Q: What is the difference between CD74HC153M96 and MC74HC153ADR2G?

A: Both parts are functionally equivalent with identical electrical specifications and package. The primary differences are manufacturer (Texas Instruments versus onsemi) and packaging format (Tape & Reel for both). Selection between these parts depends on supplier availability and procurement preferences.

Q: Why do SN74HC153D and SN74HC153DR have higher output current ratings?

A: The SN74HC153 series variants feature 7.8mA output current compared to 5.2mA in the 74HC153D,652 and CD74HC153M96 variants. This represents a different product line within the 74HC153 family. Higher output current may be beneficial for driving heavier loads but is not required for standard multiplexer applications.

Q: Can I use SN74HC153DR in a design requiring -55°C to 125°C operation?

A: No. SN74HC153DR operates only from -40°C to 85°C, which does not meet the extended temperature requirement. Use MC74HC153ADR2G or CD74HC153M96 for applications requiring -55°C to 125°C operation.

Q: Is CD74HC153M suitable for new product designs?

A: No. CD74HC153M is obsolete and lacks RoHS3 compliance. Use MC74HC153ADR2G or CD74HC153M96 for new designs to ensure regulatory compliance and long-term supply chain stability.

Q: Are all substitute parts pin-compatible with 74HC153D,652?

A: Yes. All listed substitute parts use the 16-SOIC package with identical pin configuration and logic function, ensuring direct PCB compatibility without layout modifications.

Q: What packaging options are available for substitute parts?

A: MC74HC153ADR2G is supplied in Tape & Reel format. CD74HC153M96 is supplied in Tape & Reel format. SN74HC153DR is supplied in Cut Tape and Digi-Reel format. Packaging selection depends on production volume and assembly process requirements.