74F10PC NAND Gate IC Equivalent & Substitute Parts

Part Overview

The 74F10PC is a NAND Gate IC featuring 3 channels with 3 inputs per channel, manufactured by onsemi in a 14-MDIP package. This component is classified as obsolete, making equivalent substitute parts necessary for new designs and ongoing production requirements. The 74F10 series logic gate remains functionally relevant despite its obsolete status, with active alternatives available from other manufacturers.

Substiute Parts

74F10PC

onsemiIn Stock: 163874F10PC Datasheet

Current PartRFQ

SN74F10N

Texas InstrumentsIn Stock: 2922SN74F10N Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the 74F10PC is determined by strict equivalence across the following critical parameters:

• Logic Configuration: 3-channel NAND gate with 3 inputs per channel
• Electrical Performance: Supply voltage 4.5V ~ 5.5V, output current 1mA/20mA, propagation delay 5ns @ 5V with 50pF load
• Input Logic Levels: Low threshold 0.8V, high threshold 2V
• Operating Temperature Range: 0°C ~ 70°C
• Physical Package: 14-DIP through-hole mounting with 0.300" (7.62mm) pitch
• Base Series: 74F logic family

The SN74F10N from Texas Instruments meets all these parameters and qualifies as a parametric equivalent substitute.

Parameter Comparison

Engineering Selection Recommendations

The SN74F10N is a direct parametric equivalent to the 74F10PC. Selection between these parts should be based on the following factors:

Product Status: The 74F10PC is obsolete, while the SN74F10N is active. For new designs and long-term production, the SN74F10N is the appropriate choice due to ongoing manufacturer support and availability.

Compliance and Certifications: The SN74F10N carries RoHS3 compliance, whereas the 74F10PC does not specify RoHS status. Both parts are REACH Unaffected and classified under ECCN EAR99. For applications requiring RoHS compliance, the SN74F10N is the required selection.

Packaging: Both parts use identical 14-DIP through-hole packages with 0.300" pitch, ensuring direct pin-compatible substitution without PCB redesign.

Electrical Equivalence: All functional and electrical parameters are identical, confirming full interchangeability at the circuit level.

Frequently Asked Questions (FAQ)

Q: Can the SN74F10N directly replace the 74F10PC without PCB modifications?

A: Yes. Both parts use the 14-DIP (0.300", 7.62mm) package with identical pinouts. Direct substitution is possible without PCB redesign.

Q: What are the key parameters that determine substitution eligibility?

A: Substitution is determined by matching logic configuration (3-channel NAND with 3 inputs), supply voltage (4.5V ~ 5.5V), output current (1mA/20mA), propagation delay (5ns @ 5V, 50pF), input logic levels (0.8V low, 2V high), operating temperature (0°C ~ 70°C), and package type (14-DIP through-hole).

Q: Why is the 74F10PC obsolete while the SN74F10N remains active?

A: Product status reflects manufacturer support and production availability. The onsemi 74F10PC has been discontinued, while Texas Instruments continues to manufacture the SN74F10N. For new designs, the active part is recommended.

Q: Are there compliance differences between these parts?

A: The SN74F10N is RoHS3 compliant, while the 74F10PC does not specify RoHS status. Both are REACH Unaffected. For applications requiring RoHS compliance, the SN74F10N is the appropriate selection.

Q: What is the difference between 14-MDIP and 14-PDIP packaging?

A: Both designations refer to 14-pin DIP packages with 0.300" pitch. MDIP and PDIP are manufacturer-specific nomenclature for the same physical package form factor. These parts are mechanically and electrically interchangeable.