74ALVC00D,118 Equivalent & Substitute Parts

Part Overview

The 74ALVC00D,118 is a NAND Gate IC manufactured by Nexperia USA Inc., featuring 4 channels with 2 inputs per channel in a 14-SO surface mount package. This logic gate operates across a wide voltage supply range of 1.65V to 3.6V, making it suitable for low-power digital applications. The part is currently active in production with full RoHS3 compliance and unlimited moisture sensitivity rating. Substitute parts are identified to provide design flexibility, alternative sourcing options, and packaging variations while maintaining functional and electrical equivalence.

Substiute Parts

74ALVC00D,118

Nexperia USA Inc.In Stock: 317574ALVC00D,118 Datasheet

Current PartRFQ

SN74ALVC00D

Texas InstrumentsIn Stock: 2236SN74ALVC00D Datasheet

SimilarRFQ

SN74ALVC00DR

Texas InstrumentsIn Stock: 3364SN74ALVC00DR Datasheet

SimilarRFQ

SN74ALVC00IDREP

Texas InstrumentsIn Stock: 1199SN74ALVC00IDREP Datasheet

SimilarRFQ

SN74ALVC00NSR

Texas InstrumentsIn Stock: 1957SN74ALVC00NSR Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the 74ALVC00D,118 is determined by the following critical parameters:

• Logic function: NAND Gate with 4 channels and 2 inputs per channel
• Voltage supply range: 1.65V ~ 3.6V
• Input/output logic levels: Low 0.7V ~ 0.8V, High 1.7V ~ 2V
• Output current capability: 24mA high and low
• Operating temperature range: -40°C ~ 85°C
• Surface mount package compatibility: 14-SOIC footprint
• Compliance: RoHS3 and REACH unaffected status

All identified substitute parts maintain these core electrical and functional parameters. Variations exist in quiescent current specifications, propagation delay characteristics, and packaging formats (Tube, Cut Tape & Digi-Reel, or Tape & Reel), which do not affect functional interchangeability in standard applications.

Parameter Comparison

Engineering Selection Recommendations

All substitute parts listed maintain active product status and full RoHS3 compliance, ensuring long-term availability and regulatory alignment. The 74ALVC00D,118 and its Texas Instruments equivalents (SN74ALVC00D, SN74ALVC00DR, SN74ALVC00IDREP, SN74ALVC00NSR) are functionally interchangeable for standard NAND gate applications within the specified voltage and temperature ranges.

Selection between substitute options should be based on packaging requirements and procurement logistics. The SN74ALVC00D is supplied in Tube format, SN74ALVC00DR in Cut Tape & Digi-Reel format, and both SN74ALVC00IDREP and SN74ALVC00NSR in Tape & Reel format. The SN74ALVC00NSR features a wider package body (5.30mm versus 3.90mm), which may affect PCB layout compatibility.

Texas Instruments substitute parts exhibit lower quiescent current (10 µA versus 20 µA) and slightly higher propagation delay (3ns versus 2.1ns), both within acceptable margins for general-purpose logic applications. All parts maintain identical output current capability and logic level thresholds.

Frequently Asked Questions (FAQ)

Q: Can SN74ALVC00DR be used as a direct replacement for 74ALVC00D,118?

A: Yes. Both parts share identical electrical specifications for supply voltage, logic levels, output current, and operating temperature. The primary difference is packaging format (Cut Tape & Digi-Reel versus Tape & Reel) and quiescent current (10 µA versus 20 µA), neither of which affects functional compatibility in standard applications.

Q: What is the significance of the propagation delay difference between 74ALVC00D,118 (2.1ns) and SN74ALVC00D (3ns)?

A: The 74ALVC00D,118 exhibits faster propagation delay. For timing-critical applications requiring propagation delays below 2.5ns, the Nexperia part is the appropriate choice. For general-purpose logic applications, the 0.9ns difference is typically negligible.

Q: Is SN74ALVC00NSR compatible with the same PCB footprint as 74ALVC00D,118?

A: SN74ALVC00NSR uses a 14-SOIC package with 5.30mm body width, compared to the 3.90mm width of 74ALVC00D,118. While both are 14-pin SOIC packages, the wider body may require PCB layout verification. The other Texas Instruments substitutes (SN74ALVC00D, SN74ALVC00DR, SN74ALVC00IDREP) use the narrower 3.90mm package and are footprint-compatible.

Q: Why do Texas Instruments parts show lower quiescent current than the Nexperia part?

A: Quiescent current variation between manufacturers reflects different process technologies and design implementations. Both specifications are within acceptable ranges for low-power logic applications. The 10 µA specification of Texas Instruments parts represents superior power efficiency in standby conditions.

Q: Are all substitute parts available in the same packaging quantities?

A: Packaging formats differ across substitutes. The 74ALVC00D,118 and SN74ALVC00IDREP are supplied in Tape & Reel format, SN74ALVC00D in Tube, and SN74ALVC00DR in Cut Tape & Digi-Reel. Tape & Reel format is standard for high-volume production, while Tube and Cut Tape formats serve lower-volume or prototype applications.