74ABT541CSJ Equivalent & Substitute Parts

Part Overview

The 74ABT541CSJ is a non-inverting buffer logic IC manufactured by onsemi, designed for 8-bit buffering applications with 3-state output capability. This component operates across a 4.5V to 5.5V supply voltage range and is housed in a 20-SOP package. The part is currently classified as obsolete, making equivalent and substitute parts necessary for ongoing system support and new design implementations.

Key Parameters

Parameter	Value
Manufacturer Part Number	74ABT541CSJ
Manufacturer	onsemi
Series	74ABT
Logic Type	Buffer, Non-Inverting
Number of Elements	1
Number of Bits per Element	8
Output Type	3-State
Current - Output High, Low	32mA, 64mA
Voltage - Supply	4.5V ~ 5.5V
Operating Temperature	-40°C ~ 85°C (TA)
Mounting Type	Surface Mount
Package / Case	20-SOIC (0.209", 5.30mm Width)
Product Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution for the 74ABT541CSJ is determined by strict equivalence across the following critical parameters:

Logic Type: Buffer, Non-Inverting
Number of Elements: 1
Number of Bits per Element: 8
Output Type: 3-State
Current - Output High, Low: 32mA, 64mA
Voltage - Supply: 4.5V ~ 5.5V
Operating Temperature: -40°C ~ 85°C (TA)
Series: 74ABT
Mounting Type: Surface Mount
Moisture Sensitivity Level: 1 (Unlimited)

Substitute parts are grouped into two categories: direct functional substitutes (identical electrical and mechanical specifications) and parametric equivalents (matching all electrical parameters with minor package variations). All substitute parts maintain the same base product number (74ABT541) and are manufactured by Texas Instruments, which is an active supplier of this logic family.

Parameter Comparison

Parameter	74ABT541CSJ (onsemi)	SN74ABT541BDW (TI)	SN74ABT541BDWR (TI)	SN74ABT541BNSR (TI)	SN74ABT541BNS (TI)
Logic Type	Buffer, Non-Inverting	Buffer, Non-Inverting	Buffer, Non-Inverting	Buffer, Non-Inverting	Buffer, Non-Inverting
Number of Elements	1	1	1	1	1
Number of Bits per Element	8	8	8	8	8
Output Type	3-State	3-State	3-State	3-State	3-State
Current - Output High, Low	32mA, 64mA	32mA, 64mA	32mA, 64mA	32mA, 64mA	32mA, 64mA
Voltage - Supply	4.5V ~ 5.5V	4.5V ~ 5.5V	4.5V ~ 5.5V	4.5V ~ 5.5V	4.5V ~ 5.5V
Operating Temperature	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C
Mounting Type	Surface Mount	Surface Mount	Surface Mount	Surface Mount	Surface Mount
Package / Case	20-SOIC (0.209", 5.30mm Width)	20-SOIC (0.295", 7.50mm Width)	20-SOIC (0.295", 7.50mm Width)	20-SOIC (0.209", 5.30mm Width)	20-SOIC (0.209", 5.30mm Width)
Product Status	Obsolete	Active	Active	Active	Active
RoHS Status	Not specified	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)

Engineering Selection Recommendations

All Texas Instruments substitute parts (SN74ABT541BDW, SN74ABT541BDWR, SN74ABT541BNSR, SN74ABT541BNS) are classified as active products with ROHS3 compliance, providing long-term availability and regulatory alignment compared to the obsolete onsemi 74ABT541CSJ.

SN74ABT541BNSR and SN74ABT541BNS are preferred for direct mechanical compatibility, as both maintain the 20-SOIC (0.209", 5.30mm Width) package footprint identical to the original part. These options eliminate the need for PCB layout modifications.

SN74ABT541BDW and SN74ABT541BDWR are functionally equivalent but use a wider 20-SOIC (0.295", 7.50mm Width) package. Selection of these parts requires PCB footprint verification and potential layout adjustments. The BDWR variant is supplied in Cut Tape and Digi-Reel packaging, while BDW is supplied in Tube packaging.

All substitute parts maintain identical electrical specifications, including output current ratings, supply voltage range, and operating temperature range, ensuring direct functional replacement in existing circuit designs.

Frequently Asked Questions (FAQ)

Q: Can SN74ABT541BDW be used as a direct replacement for 74ABT541CSJ?

A: SN74ABT541BDW is electrically equivalent but uses a wider 20-SOIC package (0.295" vs. 0.209"). PCB footprint compatibility must be verified before substitution. If the PCB layout accommodates the wider package, this part is functionally suitable.

Q: What is the difference between SN74ABT541BNSR and SN74ABT541BNS?

A: Both parts are electrically and mechanically identical, maintaining the 20-SOIC (0.209", 5.30mm Width) package. The primary difference is packaging format: BNSR is supplied in Tape & Reel (TR), while BNS packaging is not specified. Selection depends on procurement and assembly requirements.

Q: Are all substitute parts RoHS compliant?

A: All Texas Instruments substitute parts (SN74ABT541BDW, SN74ABT541BDWR, SN74ABT541BNSR, SN74ABT541BNS) are ROHS3 compliant. The original onsemi 74ABT541CSJ RoHS status is not specified in the provided data.

Q: What is the impact of package width differences on PCB design?

A: The 74ABT541CSJ and substitute parts SN74ABT541BNSR/BNS use 0.209" width packages, while SN74ABT541BDW/BDWR use 0.295" width packages. Wider packages require larger PCB footprints and may not fit existing board layouts designed for the narrower package. Mechanical compatibility must be confirmed during component selection.

Q: Which substitute part offers the best long-term availability?

A: All Texas Instruments substitute parts are classified as active products. SN74ABT541BNSR offers the highest current inventory (6480 Pcs) among the listed options, providing strong supply continuity.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message