TE Connectivity AMP Connectors 745828-2 Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 745828-2 is a 9 Position D-Sub Plug connector with male pins, right-angle through-hole mounting, and solder termination. This connector is part of the AMPLIMITE HD-20 series and operates across a temperature range of -55°C to 105°C with a 125V voltage rating and 6A current capacity per contact.

The 745828-2 is classified as obsolete. Identifying equivalent and substitute parts is necessary to maintain design continuity, ensure supply chain availability, and support ongoing production and field service requirements for systems utilizing this connector configuration.

Substiute Parts

745828-2

TE Connectivity AMP ConnectorsIn Stock: 1061745828-2 Datasheet

Current PartRFQ

DEPL09P565GTXLF

Amphenol ICC (FCI)In Stock: 795DEPL09P565GTXLF Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the 745828-2 are identified based on strict alignment with the following critical parameters:

Core Compatibility Parameters:

• Connector Style: D-Sub
• Connector Type: Plug, Male Pins
• Number of Positions: 9
• Number of Rows: 2
• Shell Size, Connector Layout: 1 (DE, E)
• Mounting Type: Through Hole, Right Angle
• Termination: Solder
• Contact Type: Signal

The substitute part DEPL09P565GTXLF from Amphenol ICC (FCI) satisfies all core compatibility parameters. This part maintains the same D-Sub plug configuration, 9-position layout, right-angle through-hole mounting, and solder termination required for direct functional substitution.

Substitution is valid when the substitute part meets or exceeds the electrical and mechanical specifications of the original part within the defined operating envelope.

Parameter Comparison

Engineering Selection Recommendations

Primary Substitute: DEPL09P565GTXLF

The DEPL09P565GTXLF is a direct functional substitute for the 745828-2. This part maintains identical mechanical and electrical interface specifications while providing enhanced performance characteristics.

Compliance Status:

• The DEPL09P565GTXLF is classified as Active product status, ensuring ongoing availability and manufacturing support.
• Both the original part (745828-2) and substitute (DEPL09P565GTXLF) are RoHS compliant, meeting environmental regulatory requirements.
• Both parts carry MSL 1 (Unlimited) moisture sensitivity classification, indicating no special handling requirements.

Performance Advantages: The substitute part exceeds the original specifications in three key areas: voltage rating (1000V vs. 125V), current capacity (7.5A vs. 6A per contact), and maximum operating temperature (125°C vs. 105°C). These enhanced ratings provide additional design margin and operational flexibility without requiring circuit redesign.

Mechanical Compatibility: The DEPL09P565GTXLF incorporates board lock and grounding indent features, providing enhanced mechanical retention and improved grounding performance compared to the original part.

Selection of the DEPL09P565GTXLF is appropriate for new designs, redesigns, and field replacements where the 745828-2 is no longer available.

Frequently Asked Questions (FAQ)

Q: Can the DEPL09P565GTXLF directly replace the 745828-2 in existing applications?

A: Yes. The DEPL09P565GTXLF maintains identical connector style, pin count, shell size, mounting type, and termination method. The substitute part meets all mechanical and electrical interface requirements of the original part.

Q: What is the difference in backset spacing between these parts?

A: The 745828-2 has a backset spacing of 0.478" (12.14mm), while the DEPL09P565GTXLF has a backset spacing of 0.406" (10.30mm). This difference reflects different design standards between manufacturers. Verify PCB layout compatibility before substitution if backset spacing is a critical design parameter.

Q: Are there any compliance or certification differences?

A: Both parts are RoHS compliant and carry MSL 1 (Unlimited) moisture sensitivity ratings. The DEPL09P565GTXLF includes UL94 V-0 material flammability rating, providing additional safety certification. Both parts are classified under ECCN EAR99 and HTSUS 8536.69.4040.

Q: What is the inventory status of these parts?

A: The 745828-2 (obsolete) has 1034 pieces in stock. The DEPL09P565GTXLF (active) has 696 pieces in stock. The active status of the substitute part ensures continued availability for future procurement.

Q: Does the substitute part require any design modifications?

A: No design modifications are required for electrical or mechanical interface compatibility. The substitute part is a direct form, fit, and function replacement. Verify PCB layout compatibility due to the backset spacing difference noted above.

Q: What are the contact material differences?

A: The 745828-2 contact material is not specified in available documentation. The DEPL09P565GTXLF uses copper alloy contacts with gold and GXT™ finish (30.0µin / 0.76µm thickness). Both parts provide gold contact finish for signal integrity and corrosion resistance.