Equivalent & Substitute Parts for JKL Components Corp. 7367

Part Overview

The JKL Components Corp. 7367 is an incandescent lamp rated at 10V with a clear round domed top lens and bi-pin radial lead configuration. This component is classified as obsolete, indicating it is no longer in active production. Due to its obsolete status and the need for continued system support, identifying functionally compatible substitute components is essential for maintenance and repair applications.

Substiute Parts

7367

JKL Components Corp.In Stock: 8357367 Datasheet

Current PartRFQ

715

CEC IndustriesIn Stock: 1071715 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute identification for the JKL Components Corp. 7367 is based on the following electrical and mechanical parameters:

• Lamp Type: Incandescent technology
• Voltage Rating: Operating voltage compatibility
• Lens Configuration: Physical form factor and optical characteristics
• Lead Style: Terminal configuration for circuit integration
• Light Output: Mean Spherical Candle Power (MSCP) rating

The CEC Industries 715 is identified as a manufacturer-recommended substitute. Substitution analysis is limited to parameters explicitly provided in the component specifications. Electrical compatibility and physical mounting characteristics are the primary determinants for functional equivalence.

Parameter Comparison

Engineering Selection Recommendations

The CEC Industries 715 is designated as the manufacturer-recommended substitute for the obsolete JKL Components Corp. 7367. Selection of this substitute should be based on:

• Product Availability: The 7367 is obsolete; the CEC Industries 715 is active production and available in inventory.
• Compliance Status: Verify RoHS and REACH compliance requirements for your application, as the original component is RoHS non-compliant.
• Electrical Parameters: Note the voltage rating difference (10V vs. 5V) and MSCP variation (0.08 vs. 0.15) when evaluating circuit integration.
• Physical Form Factor: Lens size and lead style differ between components; mechanical fit and electrical connection method must be validated for your specific application.

Frequently Asked Questions (FAQ)

Q: What makes the CEC Industries 715 a suitable substitute for the JKL Components 7367?

A: The CEC Industries 715 is designated as the manufacturer-recommended substitute. Both components are incandescent lamps with clear lens configurations. However, differences in voltage rating, lens size, and lead style require verification for your specific application requirements.

Q: Are there electrical compatibility concerns between the 7367 and 715?

A: Yes. The 7367 operates at 10V while the 715 operates at 5V. The MSCP ratings also differ (0.08 vs. 0.15). These parameters must be evaluated against your circuit design and performance requirements before substitution.

Q: What is the difference between bi-pin radial leads and wire terminals?

A: Bi-pin radial leads are two parallel pins extending from the lamp base for socket insertion. Wire terminals are individual conductors for direct circuit connection. Your application's mounting and connection method will determine which lead style is appropriate.

Q: Does the lens size difference affect substitution?

A: Yes. The 7367 uses an RT-1 3/4 lens while the 715 uses a T-1 lens. Physical dimensions and optical characteristics differ. Verify that the T-1 form factor fits your mechanical envelope and optical requirements.

Q: What compliance considerations apply to this substitution?

A: The original 7367 is RoHS non-compliant. If your application requires RoHS compliance, verify the compliance status of the CEC Industries 715 before implementation.