WAGO 734-236 Terminal Block Header Equivalent & Substitute Parts

Part Overview

The WAGO 734-236 is a 6-position terminal block header with male pins, shrouded on all four sides, designed for vertical through-hole mounting with 0.150" (3.81mm) pitch spacing. This component is part of the MCSMINI series and is currently in active production status. The part is used in applications requiring reliable electrical connections with solder termination and operates across a temperature range of -60°C to 100°C.

Equivalent and substitute parts are identified to provide design flexibility, support supply chain continuity, and accommodate specific application requirements such as packaging preferences, inventory availability, or minor electrical parameter variations within acceptable operating ranges.

Substiute Parts

734-236

WAGO CorporationIn Stock: 1253734-236 Datasheet

Current PartRFQ

1803468

Phoenix ContactIn Stock: 54461803468 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the WAGO 734-236 terminal block header is determined by strict equivalence in the following critical parameters:

Mandatory Matching Parameters:

• Number of Positions: 6
• Pitch: 0.150" (3.81mm)
• Header Orientation: Vertical
• Mounting Type: Through Hole
• Termination Style: Solder
• Type: Header, Male Pins, Shrouded (4 Side)

Electrical Compatibility Parameters:

• Current Rating (IEC): Substitute must meet or exceed 10A
• Voltage Rating (IEC): Substitute must meet or exceed 320V
• Contact Mating Finish: Tin

Compliance & Environmental Parameters:

• Material Flammability Rating: UL94 V-0
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)

The Phoenix Contact 1803468 qualifies as a substitute based on matching all mandatory parameters. Minor variations in electrical ratings, housing material, and physical dimensions are within acceptable tolerance for terminal block header applications where the primary function—establishing reliable electrical connections at the specified pitch and position count—remains unchanged.

Parameter Comparison

Engineering Selection Recommendations

WAGO 734-236 Selection Criteria:

• Applications requiring IEC current rating of 10A
• Applications requiring IEC voltage rating of 320V
• Operating environments spanning -60°C to 100°C
• Designs specifying Polyamide (PA66) housing material
• Applications where contact tail length of 0.177" (4.50mm) is required
• Box packaging preference

Phoenix Contact 1803468 Selection Criteria:

• Applications with IEC current requirements of 8A or lower
• Applications with IEC voltage requirements of 250V or lower
• Designs compatible with Polybutylene Terephthalate (PBT) housing material
• Applications where contact tail length of 0.134" (3.40mm) is acceptable
• Bulk packaging preference
• Supply chain continuity when WAGO 734-236 availability is constrained

Both parts maintain ROHS3 compliance, UL94 V-0 flammability rating, and unlimited moisture sensitivity level (MSL 1), ensuring regulatory and environmental compliance across applications. The Phoenix Contact 1803468 is suitable for substitution in applications where the electrical and thermal requirements do not exceed its specified ratings.

Frequently Asked Questions (FAQ)

Q: Can the Phoenix Contact 1803468 be used as a direct replacement for the WAGO 734-236 in all applications?

A: The Phoenix Contact 1803468 qualifies as a substitute only in applications where the electrical requirements do not exceed 8A (IEC) and 250V (IEC). Applications requiring the full 10A (IEC) and 320V (IEC) ratings of the WAGO 734-236 must use the original part or verify that the substitute's lower ratings are acceptable for the specific circuit design.

Q: What are the physical differences between these two parts?

A: The primary physical differences are contact tail length (WAGO: 0.177" vs. Phoenix Contact: 0.134") and insulation height (WAGO: 0.406" vs. Phoenix Contact: 0.362"). These differences may affect PCB layout and mounting clearances. Housing material also differs: WAGO uses Polyamide (PA66) while Phoenix Contact uses Polybutylene Terephthalate (PBT).

Q: Are both parts suitable for the same PCB footprint?

A: Both parts share identical pitch (0.150" / 3.81mm), position count (6), and vertical through-hole mounting type. However, the different contact tail lengths and insulation heights may require PCB layout verification to ensure proper fit and clearance.

Q: Do both parts meet the same compliance standards?

A: Yes. Both the WAGO 734-236 and Phoenix Contact 1803468 are ROHS3 compliant, REACH unaffected, and rated UL94 V-0 for material flammability. Both carry unlimited moisture sensitivity level (MSL 1).

Q: What is the difference in packaging between these parts?

A: The WAGO 734-236 is supplied in box packaging, while the Phoenix Contact 1803468 is supplied in bulk packaging. This affects inventory management and handling procedures but does not impact electrical or mechanical function.

Q: Which part should be selected for new designs?

A: For new designs, select based on the application's electrical requirements. If the design requires 10A (IEC) and 320V (IEC), the WAGO 734-236 is the appropriate choice. If the design operates within 8A (IEC) and 250V (IEC) limits, either part is suitable, with selection based on availability, packaging preference, and housing material compatibility.

Q: Can operating temperature range affect the substitution decision?

A: The WAGO 734-236 specifies an operating temperature range of -60°C to 100°C. The Phoenix Contact 1803468 does not provide an operating temperature specification in the available data. Applications requiring operation across the full -60°C to 100°C range should use the WAGO 734-236 to ensure documented thermal performance.