Amphenol ICC 7312P0035A13 Smart Card Connector - Equivalent & Substitute Parts

Part Overview

The Amphenol ICC 7312P0035A13 is an 18-position (16 + 2) smart card push-pull connector with surface mount, right-angle configuration and gold contact finish. This connector is classified as obsolete, making identification of suitable substitute components essential for ongoing design support and production continuity. The part features board guide and switch functionality, designed for smart card applications requiring reliable push-in/pull-out insertion and removal cycles.

Substiute Parts

7312P0035A13

Amphenol ICC (FCI)In Stock: 9017312P0035A13 Datasheet

Current PartRFQ

7312P0225A13LF

Amphenol ICC (FCI)In Stock: 19707312P0225A13LF Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the 7312P0035A13 is based on the following critical parameters that must align for functional compatibility:

• Connector Type & Card Type: Smart card connector classification
• Mounting Configuration: Surface mount, right-angle orientation
• Insertion/Removal Mechanism: Push-in/pull-out operation
• Contact System: Gold finish with GXT™ specification
• Functional Features: Board guide and switch presence
• Position Count: The substitute part 7312P0225A13LF operates with 10 positions (8 + 2), representing a reduced-position variant within the same connector family

The 7312P0225A13LF is identified as a direct substitute within the Amphenol ICC P-series smart card connector line, sharing the same fundamental connector architecture, insertion mechanism, and contact finish specification while accommodating applications requiring fewer contact positions.

Parameter Comparison

Engineering Selection Recommendations

Product Status Consideration: The 7312P0035A13 is classified as obsolete, while the substitute 7312P0225A13LF maintains active product status with ongoing manufacturer support and availability (1940 pcs in stock versus 824 pcs for the obsolete part).

Compliance Differentiation: The substitute part 7312P0225A13LF is RoHS compliant, whereas the main part is RoHS non-compliant. For applications subject to RoHS regulations or requiring compliance with current environmental standards, the substitute part provides regulatory alignment. The substitute is also REACH affected, indicating current regulatory tracking.

Position Count Variance: Selection between these parts depends on circuit requirements. The main part accommodates 18 positions (16 + 2), while the substitute provides 10 positions (8 + 2). This difference necessitates design-level evaluation to confirm whether the reduced position count aligns with application requirements.

Mechanical Compatibility: Both parts share identical mounting configuration (surface mount, right angle), insertion mechanism (push-in/pull-out), and functional features (board guide, switch), ensuring mechanical interchangeability where position count permits.

Frequently Asked Questions (FAQ)

Q: Can the 7312P0225A13LF directly replace the 7312P0035A13 in existing designs?

A: Direct replacement is possible only if the application circuit requires 10 or fewer contact positions. The substitute part provides 10 positions (8 + 2) compared to the original 18 positions (16 + 2). Circuit redesign may be necessary if all 18 positions are actively utilized.

Q: What are the key compatibility factors between these connector variants?

A: Both connectors share the same smart card connector architecture, surface mount right-angle mounting, push-in/pull-out insertion mechanism, gold GXT™ contact finish, and integrated board guide with switch features. These parameters ensure functional compatibility within the position count constraint.

Q: Does the RoHS compliance difference affect substitution decisions?

A: RoHS compliance status is a regulatory and supply chain consideration rather than a functional compatibility factor. The 7312P0225A13LF's RoHS compliance may be required for applications subject to RoHS directives or customer specifications. The obsolete status of the main part may necessitate transition to the compliant substitute regardless of technical requirements.

Q: Are there packaging differences between these parts?

A: The main part 7312P0035A13 packaging is not specified in available data. The substitute 7312P0225A13LF is supplied in tray packaging. Packaging format should be confirmed with procurement requirements.

Q: What is the significance of the MSL rating for both parts?

A: Both connectors carry MSL rating 1 (Unlimited), indicating no moisture sensitivity limitations. Storage and handling conditions do not require special moisture control measures for either part.