C&K 7301SDAME Toggle Switch 3PDT 5A 120V Equivalent & Substitute Parts

Part Overview

The C&K 7301SDAME is a panel-mounted toggle switch with 3PDT (three-pole, double-throw) configuration, rated for 5A at 120V AC and 28V DC. This component features a standard round actuator with epoxy-sealed PC pin termination and is designed for applications requiring reliable switching in industrial and control systems. The 7301SDAME is classified as obsolete, making identification of compatible substitute parts essential for ongoing maintenance, repair, and new design implementations where this series is specified.

Substiute Parts

7301SDAME

C&KIn Stock: 7877301SDAME Datasheet

Current PartRFQ

7301SDASE

C&KIn Stock: 12047301SDASE Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the 7301SDAME must maintain electrical and mechanical compatibility within the C&K 7000 series toggle switch family. The critical parameters determining substitution eligibility are:

• Circuit configuration (3PDT)
• Switch function (On-On)
• Current and voltage ratings (5A AC/DC, 120V AC, 28V DC)
• Mounting type and mechanical interface (Panel Mount, Right Angle)
• Actuator specifications (Standard Round, 12.45mm length)
• Termination style (PC Pin)
• Panel cutout dimensions (Circular - 6.35mm Dia)
• Bushing thread specification (1/4-40)
• Operating temperature range (-30°C to 85°C)
• Electrical life rating (100,000 Cycles)

Parts meeting all these parameters are considered direct functional equivalents and may be substituted without modification to mechanical mounting, electrical connections, or circuit design.

Parameter Comparison

Engineering Selection Recommendations

The C&K 7301SDASE is a direct functional equivalent to the obsolete 7301SDAME. All electrical parameters, mechanical dimensions, and performance specifications are identical. The primary distinction is product status: the 7301SDASE is currently active in the C&K product line, whereas the 7301SDAME is obsolete.

For new designs or ongoing production requiring 3PDT toggle switches with these specifications, the 7301SDASE is the appropriate selection. The substitute part maintains full compatibility with existing mechanical mounting interfaces and electrical circuit requirements.

An additional consideration is regulatory compliance: the 7301SDASE is RoHS Compliant, whereas the 7301SDAME is RoHS non-compliant. Applications subject to RoHS requirements should prioritize the 7301SDASE. The 7301SDASE is also REACH Affected, compared to the 7301SDAME which is REACH Unaffected; however, both parts carry the same ECCN (EAR99) and HTSUS classification.

Frequently Asked Questions (FAQ)

Q: Can the 7301SDASE be used as a direct replacement for the 7301SDAME in existing assemblies?

A: Yes. The 7301SDASE is mechanically and electrically identical to the 7301SDAME. Panel cutout dimensions, bushing thread specifications, actuator geometry, and all electrical ratings are identical. No modifications to mounting hardware, panel drilling, or circuit connections are required.

Q: What is the primary reason to substitute the 7301SDAME with the 7301SDASE?

A: The 7301SDAME is obsolete and no longer manufactured. The 7301SDASE is the active production equivalent within the C&K 7000 series, ensuring availability for repair, maintenance, and new production requirements.

Q: Are there any compliance differences between these parts?

A: The 7301SDASE is RoHS Compliant, while the 7301SDAME is RoHS non-compliant. For applications subject to RoHS directives, the 7301SDASE is the required selection. Both parts share identical ECCN and HTSUS classifications.

Q: Do the electrical ratings differ between the 7301SDAME and 7301SDASE?

A: No. Both parts are rated for 5A at 120V AC and 28V DC, with identical 3PDT configuration and On-On switch function. Operating temperature range and electrical life specifications are also identical.

Q: What are the critical mechanical parameters for substitution compatibility?

A: Panel mount orientation (right angle), circular panel cutout diameter (6.35mm), bushing thread specification (1/4-40), actuator type (standard round), and actuator length (12.45mm) must all match. The 7301SDASE meets all these requirements.