C&K 7301J2AME2 Rocker Switch 3PDT 5A 120V - Equivalent & Substitute Parts

Part Overview

The C&K 7301J2AME2 is a 3PDT rocker switch rated for 5A at 120V AC (28V DC), designed for through-hole, right-angle mounting applications. This switch features a black paddle actuator with epoxy-sealed PC pin terminals and is rated for 100,000 electrical cycles. The 7301J2AME2 carries an obsolete product status, making identification of active equivalent parts essential for ongoing procurement and system maintenance.

Substiute Parts

7301J2AME2

C&KIn Stock: 7837301J2AME2 Datasheet

Current PartRFQ

7301J2ASE2

C&KIn Stock: 11637301J2ASE2 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the 7301J2AME2 is determined by strict equivalence across the following critical parameters:

• Circuit configuration (3PDT)
• Switch function (On-On)
• Current and voltage ratings (5A AC/DC, 120V AC, 28V DC)
• Mounting type (Through Hole, Right Angle)
• Actuator type (Paddle)
• Termination style (PC Pin)
• Operating temperature range (-30°C to 85°C)
• Electrical life rating (100,000 cycles)
• Approval certification (cULus)

The 7301J2ASE2 meets all these criteria and is classified as a direct manufacturer equivalent. The primary distinction is product status: the 7301J2AME2 is obsolete, while the 7301J2ASE2 is active in production.

Parameter Comparison

Engineering Selection Recommendations

The 7301J2ASE2 is the direct functional equivalent to the 7301J2AME2 and is the appropriate selection for new designs and ongoing procurement. Key considerations:

• The 7301J2ASE2 maintains identical electrical and mechanical specifications across all critical parameters.
• The substitute part carries active product status, ensuring continued availability and supply chain stability.
• The 7301J2ASE2 is RoHS Compliant, meeting modern environmental and regulatory requirements, whereas the obsolete 7301J2AME2 is RoHS non-compliant.
• Both parts carry cULus approval certification, confirming compliance with North American safety standards.
• The 7301J2ASE2 provides panel cutout dimensions (17.96mm x 10.62mm), supporting accurate PCB and enclosure design.

Frequently Asked Questions (FAQ)

Q: Can the 7301J2ASE2 directly replace the 7301J2AME2 in existing applications?

A: Yes. The 7301J2ASE2 is electrically and mechanically equivalent across all functional parameters: 3PDT circuit, 5A/120V AC rating, On-On function, through-hole right-angle mounting, paddle actuator, PC pin termination, and 100,000-cycle electrical life. Both parts are cULus certified.

Q: What is the primary difference between these two parts?

A: The 7301J2AME2 is obsolete, while the 7301J2ASE2 is active in production. The 7301J2ASE2 also offers RoHS Compliance and REACH Affected status, reflecting current environmental standards.

Q: Are there any panel cutout or mounting dimension differences?

A: The 7301J2ASE2 specifies panel cutout dimensions of 17.96mm x 10.62mm (rectangular). The 7301J2AME2 does not provide this specification. Both parts use identical through-hole, right-angle mounting.

Q: Do these switches have the same electrical life rating?

A: Yes. Both the 7301J2AME2 and 7301J2ASE2 are rated for 100,000 electrical cycles and operate across the same temperature range (-30°C to 85°C).

Q: Is RoHS compliance a factor in selecting between these parts?

A: For new designs and applications subject to RoHS regulations, the 7301J2ASE2 is required. The 7301J2AME2 is RoHS non-compliant and should not be used in regulated applications.