723W-X2/01 Equivalent & Substitute Parts

Part Overview

The 723W-X2/01 is a Power Entry Connector Receptacle module featuring IEC 320-C14 configuration with male blades, designed for panel mount snap-in installation. This component accommodates a twin fused drawer and operates at 10A, 250VAC for commercial applications. The part is currently obsolete, necessitating identification of active equivalent models to maintain design continuity and ensure procurement availability for new production runs and field replacements.

Substiute Parts

723W-X2/01

Qualtek Electronics Corp.In Stock: 1099723W-X2/01 Datasheet

Current PartRFQ

723W-X2/02

Qualtek Electronics Corp.In Stock: 2894723W-X2/02 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

The 723W-X2/02 qualifies as a direct substitute for the 723W-X2/01 based on electrical and mechanical parameter equivalence. Both parts share identical specifications across all critical substitution criteria: connector style (IEC 320-C14), connector type (Receptacle, Male Blades - Module), current rating (10A), voltage rating (250VAC), number of positions (3), mounting configuration (Panel Mount, Snap-In), filter type (Unfiltered - Commercial), fuse holder design (Twin Fused), panel thickness accommodation (0.031" ~ 0.079"), and regulatory approvals (CSA, TUV, UL).

The primary distinction between these parts is termination method and product status. The 723W-X2/01 uses solder eyelet termination and is obsolete. The 723W-X2/02 employs quick connect 0.110" (2.8mm) termination and maintains active production status. Both parts are ROHS3 compliant and share the same base product number (723W-X2), confirming their functional equivalence within the same product family.

Parameter Comparison

Engineering Selection Recommendations

The 723W-X2/02 is the active equivalent for the obsolete 723W-X2/01. Both parts maintain identical electrical ratings (10A, 250VAC), mechanical mounting specifications (Panel Mount, Snap-In), and regulatory certifications (CSA, TUV, UL). The 723W-X2/02 is currently in active production with 2837 units in stock, compared to the 723W-X2/01 which is obsolete with limited remaining inventory (1075 units).

Selection between these parts depends on termination compatibility with the target application. The 723W-X2/01 uses solder eyelet termination, suitable for direct PCB or wire soldering. The 723W-X2/02 uses quick connect 0.110" (2.8mm) termination, compatible with standard quick-disconnect receptacles. Both parts satisfy identical electrical and mechanical requirements and carry equivalent regulatory compliance. For new designs and ongoing production, the 723W-X2/02 is recommended due to active status and superior availability.

Frequently Asked Questions (FAQ)

Q: Can the 723W-X2/02 directly replace the 723W-X2/01 in existing designs?

A: Electrical and mechanical compatibility is confirmed. The primary consideration is termination method. The 723W-X2/01 features solder eyelet termination while the 723W-X2/02 uses quick connect 0.110" (2.8mm) termination. Substitution requires verification that the receiving circuit or connector interface accommodates the quick connect termination standard.

Q: Are both parts rated for the same electrical specifications?

A: Yes. Both parts are rated at 10A, 250VAC with identical connector style (IEC 320-C14), number of positions (3), and filter configuration (Unfiltered - Commercial). Electrical performance and safety margins are equivalent.

Q: What is the significance of the different packaging specifications?

A: The 723W-X2/01 is listed with no specified packaging, while the 723W-X2/02 is supplied in bulk packaging. This reflects the obsolete versus active status. For procurement, the 723W-X2/02 bulk packaging is standard for active production components.

Q: Do both parts meet the same regulatory requirements?

A: Yes. Both parts carry identical approvals from CSA, TUV, and UL, and both are ROHS3 compliant. Regulatory compliance is equivalent for applications requiring these certifications.

Q: Why is the 723W-X2/02 recommended over the 723W-X2/01?

A: The 723W-X2/02 is in active production with significantly higher inventory availability (2837 units versus 1075 units). The 723W-X2/01 is obsolete, making long-term procurement unreliable. For new designs and production continuity, the 723W-X2/02 ensures sustained component availability.